RPI Designs C7 Corvette Stingray/Z06/Grand Sport NPP Mild2Wild Exhaust Controller!!!
#21
Safety Car
I posted this in the other thread, but thought I might here too. I will be ordering this today. Just wondering if the switch remembers the state it's in when you turn the car off? No big deal, just interested.
[Edit: Just ordered! Looks like fun! (and the code still doesn't work)]
[Edit: Just ordered! Looks like fun! (and the code still doesn't work)]
Last edited by JonMN; 11-01-2016 at 03:52 PM.
#23
Platinum Supporting Vendor
Thread Starter
I posted this in the other thread, but thought I might here too. I will be ordering this today. Just wondering if the switch remembers the state it's in when you turn the car off? No big deal, just interested.
[Edit: Just ordered! Looks like fun! (and the code still doesn't work)]
[Edit: Just ordered! Looks like fun! (and the code still doesn't work)]
__________________
The following users liked this post:
JonMN (11-01-2016)
#24
Safety Car
I believe it does, but I am confirming that now and will repost. Just refunded the 5% discount. To anyone that would like to order I am working on getting the discount fix, in the mean time please call to place your order for the discount please call 888-257-8515 ext 2. Thanks, Don
PS: A big thanks for the installation photos!
#26
#28
Burning Brakes
#29
Platinum Supporting Vendor
Thread Starter
#30
Don,
I have a question on how Homelink works, which I do have on my '14. Do you program it to one button, which you press once for "on" and then again for "off." Or, do you have to program 2 of the Homelink buttons, one for "on" and one for "off."
I have a question on how Homelink works, which I do have on my '14. Do you program it to one button, which you press once for "on" and then again for "off." Or, do you have to program 2 of the Homelink buttons, one for "on" and one for "off."
#31
Advanced
Sorry about that, I am getting it fixed but in the meantime please send me your invoice # to my email and I will refund the discount donrpidesigns@gmail.com Thanks, Don
#32
Burning Brakes
You need 2 of the 3 buttons available. Program #1 to open and #2 to close the valves. Leaves #3 for your garage door.
The following users liked this post:
Foosh (11-01-2016)
#33
OK thanks much for the definitive answer. I read your excellent writeup of the circuit board and DIY system you built for the same purpose, which was very well done. It was from your write-up that I thought to ask the question.
So . . . Homelink noworkyforme. I have buttons 1 and 3 programmed for two different garage doors that I access routinely. That's OK, I'll just velcro a fob somewhere hidden.
So . . . Homelink noworkyforme. I have buttons 1 and 3 programmed for two different garage doors that I access routinely. That's OK, I'll just velcro a fob somewhere hidden.
#34
Burning Brakes
OK thanks much for the definitive answer. I read your excellent writeup of the circuit board and DIY system you built for the same purpose, which was very well done. It was from your write-up that I thought to ask the question.
So . . . Homelink noworkyforme. I have buttons 1 and 3 programmed for two different garage doors that I access routinely. That's OK, I'll just velcro a fob somewhere hidden.
So . . . Homelink noworkyforme. I have buttons 1 and 3 programmed for two different garage doors that I access routinely. That's OK, I'll just velcro a fob somewhere hidden.
Years ago, I opened up a garage door opener and soldered a wire with a remote switch. Buried the opener in the dash and hid the switch.
#35
Good point!
#37
No, RPI still sells the M2W for the C6, but it's a different device.
The following users liked this post:
Joy c7 (11-01-2016)
#39
Turning it "on" is always open, just like pulling the fuse. Turning it "off" restores it to factory programming with the std. mode control settings, which means you have to use factory modes to keep it always closed.
#40
Platinum Supporting Vendor
Thread Starter
Coupon Code RPIDON5 is working now for the additional 5% off!!!