When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Got my c7performance.shop Carbon fiber door sill plates installed.
Really like that look and on a ZR1 no less....SO GOOD. And Sebring Orange is a perfect exterior color. The American flag on the port window is a very nice touch.
My 2016 C7 Convertible with a C5 Cargo trailer to haul chairs and a Corvette 10 x 10 canopy for the Club use.
I went to a Corvette Show put on by Corvette Cleveland at Sunnyside Chevrolet in Elyria, OH! Had a great with plenty of different generations of Corvettes.
And I’m a BIG fan of the lift door mod. Looks awesome!
As an aside, I would really like to see a front view pic of the car with the doors up.
Installed an MGW shifter in my 2019 Stingray. It went faster than the installation on my 2016. I'll really speed through it on the next one, Oh, wait...
I use Mothers foam cone or foam ball, both are mounted on drill shank, then use any aluminum polish, Mothers has that as well. 5 minutes per tip and your good to go.
I have the foam cone as well but now that I am thinking, I haven't used it in a while so I need to step it up!
Originally Posted by SMT1004
I use Mothers foam cone or foam ball, both are mounted on drill shank, then use any aluminum polish, Mothers has that as well. 5 minutes per tip and your good to go.
Completed one of the most unforgiving mods .... Installed an Adrenaline Red passenger side A/C dash vent....spread out over four sessions, lost track of how many hours it took. Made some mistakes, lost a hex drive socket somewhere in the center console abyss, hope it doesn't jam up the manual shifter, glove box no longer opens without having to employ the special release feature. Would I do it again? Absolutely!
Forgot to mention, I solved the impossible to remove '2 screws' that hold the panel in place way under the dash and way out of sight. The 7mm wrench in the picture addresses all the issues of trying to remove these trim screws. The angle shown is exactly what you need to engage the head of each screw. BTW, those trim screws are everywhere in this vehicle, I removed at least a dozen on this mod....
Last edited by $$$frumnuttin'; 06-15-2019 at 07:19 PM.
06-12-2019, 07:04 PM
And I’m a BIG fan of the lift door mod. Looks awesome!
