When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Sounds like you might have the stages mixed up, which might explain your difficulty tracking it down. Stage 1 Splitter (also called "Poverty Splitter") was not available in carbon fiber and has no Winglets. Different shape entirely. The Splitter with the small Winglets is actually Stage 2, and the taller Winglets are Stage 3. If you still can't find OEM carbon fiber, I'd bet Apsis has them in matching carbon fiber.
You're correct. However, I was able to install a carbon fiber splitter without the winglets. I think it looks cleaner but that's just me. CFkits do sell the stage II or III winglets. That's where I got mine.
I should have posted a pic of one of the best garments (IMHO) that someone ordered, the jacket....hopefully they don't mind me sharing, but the picture below is a ladies version of the jacket and it just looks awesome, if we order again I'm getting one of them.
If another order happens, it just takes a minimum quantity of 6 items, so yea, I'll start collecting names. Just send me a PM so I don't forget and I'll start keeping track. In the PM, include your email address as well as a rough idea as to what you would be looking for and how many.
You can add me to the list for 1 polo shirt large and 1 men jacket large .
Thank you,
Oh, and all the product numbers from the previous order were included in the email that has been sent out for folks about the 2nd order. If you have not received an email from me, please PM me with your email address...
Has not arrived yet, soon. the tracking #9405 5036 9930 0168 7532 81 said still in transit. So, soon, when the house is found, lol. Thanks again, GREAT year, GREAT time, and a GREAT VETT.
Sounds like you might have the stages mixed up, which might explain your difficulty tracking it down. Stage 1 Splitter (also called "Poverty Splitter") was not available in carbon fiber and has no Winglets. Different shape entirely. The Splitter with the small Winglets is actually Stage 2, and the taller Winglets are Stage 3. If you still can't find OEM carbon fiber, I'd bet Apsis has them in matching carbon fiber.
You're correct. I have all exposed carbon fiber ground effects - Stage 2 and the car has the Z07 package. I had a lengthy discussion with GM as depending in which order form or option list you look at, the tall end caps and center wicker bill were supposed to come with the Z07 package. One fellow at GM said yes and they would send them, one said only the Z06 gets these goodies. In any event, I have the center wicker and I'm looking for the tall end caps in CF. So far haven't found any compatible with the OEM GM splitter?
You're correct. I have all exposed carbon fiber ground effects - Stage 2 and the car has the Z07 package. I had a lengthy discussion with GM as depending in which order form or option list you look at, the tall end caps and center wicker bill were supposed to come with the Z07 package. One fellow at GM said yes and they would send them, one said only the Z06 gets these goodies. In any event, I have the center wicker and I'm looking for the tall end caps in CF. So far haven't found any compatible with the OEM GM splitter?
I went with the OEM Stage 3 splitter extensions since most of the aftermarket folks do not have an exact weave match. I like the look better than the stage 2 winglets.
You're correct. I have all exposed carbon fiber ground effects - Stage 2 and the car has the Z07 package. I had a lengthy discussion with GM as depending in which order form or option list you look at, the tall end caps and center wicker bill were supposed to come with the Z07 package. One fellow at GM said yes and they would send them, one said only the Z06 gets these goodies. In any event, I have the center wicker and I'm looking for the tall end caps in CF. So far haven't found any compatible with the OEM GM splitter?
I went with the OEM Stage 3 splitter extensions since most of the aftermarket folks do not have an exact weave match. I like the look better than the stage 2 winglets.
I really like the looks of these winglets as well. I have changed my wheel spats (moldings) from the GM plastic to Carbon Fiber and with the exposed carbon fiber front splitter I'm trying to stay with the carbon fiber winglets as well vs. the carbon flash. Not having a lot of luck so far finding ones to fit OEM splitter using the same mounting. I might have a lead with APR?
I had another question for the forum...has anyone had a showcar placard or sign board made for their GSCE? I was looking on line and saw a lot of suppliers but wondered if anyone had a recommendation and what they did for design?
I really like the looks of these winglets as well. I have changed my wheel spats (moldings) from the GM plastic to Carbon Fiber and with the exposed carbon fiber front splitter I'm trying to stay with the carbon fiber winglets as well vs. the carbon flash. Not having a lot of luck so far finding ones to fit OEM splitter using the same mounting. I might have a lead with APR?
When you installed your rear wicker bill, did you have to buy any longer screws to install? I have the same spoiler you have on your car but have heard that longer screws might be needed. Also, is there any rubber washers that are required or does the wicker bill just bolt up to the spoiler?
When you installed your rear wicker bill, did you have to buy any longer screws to install? I have the same spoiler you have on your car but have heard that longer screws might be needed. Also, is there any rubber washers that are required or does the wicker bill just bolt up to the spoiler?
Thanks
The one I bought on eBay (see below) was a perfect fit, no headaches, used the original mounting screws and the wicker came with oval shaped rubber "gaskets". Piece of cake to install and looks great! The GM price is $$$ - this was only $159.99 USD
The one I bought on eBay (see below) was a perfect fit, no headaches, used the original mounting screws and the wicker came with oval shaped rubber "gaskets". Piece of cake to install and looks great! The GM price is $$$ - this was only $159.99 USD
I had another question for the forum...has anyone had a showcar placard or sign board made for their GSCE? I was looking on line and saw a lot of suppliers but wondered if anyone had a recommendation and what they did for design?
I had one made from Staples. I created a Word document with the bullet points , put it on a flash drive and off to Staples. cost was around 35 bucks.
Perfect. I attached a photo of my car with the wicker installed. I used the screws that came in the OEM spoiler (torx head) and the gaskets that came with the wicker and adjusted it all the way up for looks.
Perfect. I attached a photo of my car with the wicker installed. I used the screws that came in the OEM spoiler (torx head) and the gaskets that came with the wicker and adjusted it all the way up for looks.
Thanks, just ordered my wicker today from the same supplier.
I noticed you still have the Pilot Cup2 tires on... I replaced mine with Pilot sports and sold the Cup tires to a Corvette forum member while they still looked new. It is my understanding, based on info that michelin gave me that they have a milage life of 3K miles.
01-17-2018, 06:14 PM
