Best approach to black out grill on Z51 Coupe
#1
Drifting
Thread Starter
Best approach to black out grill on Z51 Coupe
I'm going to have my body shop put the Chevy factory blacked out Stingray, Corvette badge and Corvette flag badges on my Torch Red 2017 Z51. I want to get rid of the dental retainer strip on the front grill, I'll probably just have my body shop guy mask it and spray it a dull black.
Would that all black Z06 grill fit on a Z51 or is it the wrong size? Any other solutions for this? I think in the end painting that strip is the easiest way to do this.
Thanks in advance, pic of my car below, just got it 5 weeks ago.
Would that all black Z06 grill fit on a Z51 or is it the wrong size? Any other solutions for this? I think in the end painting that strip is the easiest way to do this.
Thanks in advance, pic of my car below, just got it 5 weeks ago.
Last edited by patentcad; 02-01-2017 at 10:45 AM.
The following users liked this post:
blkvet6 (02-01-2017)
The following users liked this post:
mdbennes (02-01-2017)
#4
Melting Slicks
Nice ride, will look much better without the chrome fish and any other chrome.
Last edited by cheapthrills; 02-01-2017 at 11:12 AM.
#5
Racer
The Z06 grille will fit your car. I had one installed in my 1LT Z51 and I like the look much better than the stock grille.
The following users liked this post:
blkvet6 (02-01-2017)
#6
Did Z06 grill and quarter vent swap on my 2015 and loved it. Great links in how-to section of forum. The video might be under a single user search.
https://www.corvetteforum.com/forums...-stingray.html
https://www.corvetteforum.com/forums...-stingray.html
Last edited by JC 2004; 02-01-2017 at 11:21 AM.
#7
I forgot who I got it from a carbon black flash tape strip 20 bucks looks great. Although I would love to have a Z06 grill with the camera it is about 400 bucks and requires removing the front bumper no thanks. painting is nice probably get chipped and is a pain to do. The tape was easy. BTW save your money re the black emblems it is easy to do with some fishing line to pull them off and use alcohol to dissolve the residue for the fish just measure where they are and replace. The crossed flags have depressions in the car to center them. The corvette script comes with a templet. So easy even a carve man could do it
Last edited by dashotgun; 02-01-2017 at 11:51 AM.
#8
Drifting
Thread Starter
^^^ I won't be doing it, my body shop guy will. I'll see how hard is for him to spray that chrome strip, he may not even have to take the air dam off to get to it.
Last edited by Steve Garrett; 02-01-2017 at 09:09 PM. Reason: No need to re-quote the previous post, especially if you're the next person posting.
#9
Race Director
Member Since: Aug 1999
Location: Bluffton SC via Canton Oh
Posts: 11,351
Received 1,984 Likes
on
1,143 Posts
Electrical Tape........... 10 minutes and basically zero costs. Been on for 2 years.
The following 3 users liked this post by Greg00Coupe:
#12
Le Mans Master
I forgot who I got it from a carbon black flash tape strip 20 bucks looks great. Although I would love to have a Z06 grill with the camera it is about 400 bucks and requires removing the front bumper no thanks. painting is nice probably get chipped and is a pain to do. The tape was easy. BTW save your money re the black emblems it is easy to do with some fishing line to pull them off and use alcohol to dissolve the residue for the fish just measure where they are and replace. The crossed flags have depressions in the car to center them. The corvette script comes with a templet. So easy even a carve man could do it
#14
Team Owner
Member Since: Aug 2004
Location: The Beautiful Pacific Northwest
Posts: 24,129
Received 1,029 Likes
on
549 Posts
St. Jude Donor '05-'06-'07-'08-'09, '14-'15-'16-'17-'18
I just used a carbon fiber type roll of tape and trimmed it to cover the bright retainer. Still looks like the real thing after 5 months of driving in rain and plenty of washes.
Highly recommend.
Highly recommend.
The following users liked this post:
GQMGT (06-30-2022)
#16
Tape?
I have a carbon flash grill from the factory on my 2016 Z51. Personally my car never would have left the dealership until the grill was replaced, had it been silver or chrome. I cannot imagine putting a piece of electrical tape on my $92,000 car and calling it good. I'm sorry but that just seems cheesy to me. Have it painted or replace it with a black grill that is just my opinion. Certainly don't want to insult anyone just my thoughts on the situation.
#19
Instructor
Swapped my Z51 for the Zo6 with cameras last night.(took about an hour and a half) I too thought it was a bit pricey, but found a guy on the forum selling his and saved a bunch. Now after seeing it installed in person I would totally be willing to pay full price haha it looks amazing!
The following users liked this post:
B177YB0B (02-03-2017)
#20
Race Director
I applied electrical tape in April 2014 to see if I'd like the look. Still liking it today. 15 minute job. If you do it and don't like it, 15 second removal.