Dave Kitch

I have the glove box out and 3 of the 5 screws out. Must you remove the aluminum plate inside the glovebox to access the 2 center screws?

Dave K.

Jmcdude

May find what you're looking for in this how to sticky.

https://www.corvetteforum.com/forums...nger-dash.html

Dave Kitch

Thanks but already used this. Not enough detail showing where center screws holding dash pad are located.

Dave Kitch

I removed the dash pad. The problem was that GM during assembly did not align the aluminum glove box frame to the point that I could get access to the upper screws. Drilled access holes through the frame which gave me access to the two screws.