Pearl Nickel Z06 wheels...
#1
Le Mans Master
Thread Starter
Pearl Nickel Z06 wheels...
Are there any vendors out there that offer the Z06 replica wheels in the Pearl Nickel finish that will fit a Grand Sport? I can get chrome, black and black chrome but I can't seem to find pearl nickel finish. I suspect it's because these are the stock wheels and most people want black or chrome. If push comes to shove I will get the black chrome to replace the black wheels on my incoming Grand Sport which has black wheels. Any advice would be appreciated. Thanks.
The following users liked this post:
Myfourth1 (02-22-2017)
#3
Le Mans Master
Thread Starter
#4
Pro
Try posting a want to buy ad in the C7 parts forum. I would think that quite a few people would have them sitting around after buying chrome or black ones from HOW.
The following users liked this post:
Myfourth1 (02-22-2017)
#6
E-Ray, 3LZ, ZER, LIFT
Member Since: Sep 2007
Location: NE South Carolina
Posts: 29,483
Received 9,619 Likes
on
6,625 Posts
Are there any vendors out there that offer the Z06 replica wheels in the Pearl Nickel finish that will fit a Grand Sport? I can get chrome, black and black chrome but I can't seem to find pearl nickel finish. I suspect it's because these are the stock wheels and most people want black or chrome. If push comes to shove I will get the black chrome to replace the black wheels on my incoming Grand Sport which has black wheels. Any advice would be appreciated. Thanks.
Last edited by JerryU; 02-23-2017 at 03:08 PM.
The following users liked this post:
Myfourth1 (02-23-2017)
#7
Le Mans Master
Thread Starter
Are you a mind reader? LOL
If anyone else has suggestions for powder coating in the Phoenix area let me know.
#8
E-Ray, 3LZ, ZER, LIFT
Member Since: Sep 2007
Location: NE South Carolina
Posts: 29,483
Received 9,619 Likes
on
6,625 Posts
You must have been reading my mind. I was just researching powder coating when you posted this advice. It looks like powder coating 19-20 inch wheels runs about $75 per wheel. A local shop I researched has a 4 wheel special for $475. Powder coating, mounting and balancing. Obviously I'd have to check them out first to see if they can handle the Grand Sport wheels, but thanks for the advice.
If anyone else has suggestions for powder coating in the Phoenix area let me know.
If anyone else has suggestions for powder coating in the Phoenix area let me know.
You'll have a more durable coating and perhaps won't need to replace the brake pads because the GS pads may cause painted wheels to pit- at least that was my experience with my Z51.
However having to clean them every 100 to 150 miles will get old! Just member there is an easy solution!
#9
Le Mans Master
Member Since: Sep 2012
Location: Hagerstown MD
Posts: 6,876
Received 1,738 Likes
on
1,174 Posts
St. Jude Donor '15-'16,'18
Aren't those Z06 style wheels a bear to keep clean?
Last edited by rmorin1249; 02-23-2017 at 03:49 PM.
#10
E-Ray, 3LZ, ZER, LIFT
Member Since: Sep 2007
Location: NE South Carolina
Posts: 29,483
Received 9,619 Likes
on
6,625 Posts
Yep unless you switch to ceramic brake pads! In fact if you track you can switch back to OEM pads or better- buy racing only pads. They must be warm/hot to stop and then switch to street pads when using it on the road. The stock pads are a compromise and dust excessively!
With race pads, may be able to beat you buddy's time by stopping better and when you switch back, won't have to clean your wheels every 100 miles when using it on the street!
With race pads, may be able to beat you buddy's time by stopping better and when you switch back, won't have to clean your wheels every 100 miles when using it on the street!
Last edited by JerryU; 02-23-2017 at 04:06 PM.
#11
Yes, they are...depending on tools, it takes a good 5 minutes per wheel.
IIRC, there are some aftermarket brake pads that are much better in keeping wheels clean (sorry, I don't remember the brands).
IIRC, there are some aftermarket brake pads that are much better in keeping wheels clean (sorry, I don't remember the brands).
Last edited by sunsalem; 02-23-2017 at 05:00 PM.