Anyone taken THIS piece off?? Center Console
#1
Burning Brakes
Thread Starter
Anyone taken THIS piece off?? Center Console
I would love a little feedback before I just jump in to this project. Where to start!! Do I just start prying away??? And are the "doors " easy to swap?? My luck I'll break somethi g important. Thanks for any help.
#2
Burning Brakes
Follow the instructions in:
THIS THREAD from Theta
...until you're at that cover. MANY have taken that part off. I think I've personally had it off 5 times on my own car by now for various installs/taps etc...
THIS THREAD from Theta
...until you're at that cover. MANY have taken that part off. I think I've personally had it off 5 times on my own car by now for various installs/taps etc...
#4
Melting Slicks
I checked out a few video's on U-Tube before I did mine....no issues, just take your time.
https://www.youtube.com/results?sear...onsole+removal
https://www.youtube.com/results?sear...onsole+removal
#6
Le Mans Master
Member Since: Jul 2015
Location: Northern California
Posts: 6,223
Received 1,694 Likes
on
1,240 Posts
St. Jude Donor '15
MGW shifters has a really good video too. Once you get it off, it's all just torx screws holding those parts on. Just be careful when you unscrew the cup holder cover because that spring will go flying if you don't keep it in check. It's not a terribly difficult job.
#7
Le Mans Master
Oh, I see now that they do not supply matching doors. Bummer.
Last edited by TEXHAWK0; 06-16-2017 at 09:55 PM.