Procharged C7 Z06 First Drive
10-18-2017, 09:33 AM
#1
Procharged C7 Z06 First Drive
Hey guys, just sharing my experience with my F1A procharger, Alky 50/50 meth injection, and LMR breather kit C7 Z06.
We went with the biggest pulley on the F1A, NO cam right now, and made 650hp at 5500ft elevation. We were seeing 10 pounds of boost.
This ride was at 3500ft & you can definitely feel the difference.
Hope you all enjoy this video!
We went with the biggest pulley on the F1A, NO cam right now, and made 650hp at 5500ft elevation. We were seeing 10 pounds of boost.
This ride was at 3500ft & you can definitely feel the difference.
Hope you all enjoy this video!
The following 2 users liked this post by z06_Juan:
Landru (10-18-2017),
RipcordZ51 (10-18-2017)
The following users liked this post:
z06_Juan (10-18-2017)
The following users liked this post:
z06_Juan (10-18-2017)
10-18-2017, 06:08 PM
#5
Melting Slicks
Member Since: Dec 2008
Location: Mount Airy NC
Posts: 2,073
Received 560 Likes
on
379 Posts
C7 of Year Finalist (performance mods) 2019
Sounds great. Now to your fan issue, take a look at your maf harness. My guess is that your barro pin pushed out. I had the same issue. Unplug it Check that all the pins are aligned and at the same distance sticking out. If you see an issue there let me know and i’ll Make some suggestions on how to fix. Good luck!
10-18-2017, 07:26 PM
#6
Interesting! I'll take a look when the car cools down... didn't realize that it might be an issue. I thought it was something the shop adjusted to keep temps cooler lol. Just to add; I've seen temps drop faster & stay lower than before.
Thank you!
Thank you!
