Cargo shade ideas
#1
Melting Slicks
Thread Starter
Member Since: Nov 1999
Location: Wimauma, FL
Posts: 3,046
Received 84 Likes
on
44 Posts
NCM Ambassador
Cruise-In 1, 2, 6, 8 Veteran
Cargo shade ideas
I saw a couple of people do different things to their upper cargo shade, someone put on a iron on C7 emblem. Anyone know where I can get one or any other ideas when you open the trunk for some bling. Thanks
#3
Team Owner
Member Since: Oct 2013
Location: Kansas City, Missouri
Posts: 25,356
Received 7,752 Likes
on
4,181 Posts
CORVETTE TODAY Host
St. Jude Donor'15
The following 2 users liked this post by Steve Garrett:
georgehafe (10-19-2017),
Yaupon (10-24-2017)
#5
Le Mans Master
Here you go. I sewed it on myself by simply looping the edge points. Looping gives you a clean look from the underside of the shade as well. Don’t forget to take your measurements when stretched and installed in the car. Use an old bar of soap to make your center mark. Don’t know how picky you are, but measure and remeasure that center several times. Good luck
Last edited by LT4CMG; 10-19-2017 at 11:01 PM.
The following 3 users liked this post by LT4CMG:
#6
Melting Slicks
Not cheap but airbrushing is the way to go imo!
Last edited by AttyVette; 10-19-2017 at 11:12 PM.
The following 3 users liked this post by AttyVette:
#8
Melting Slicks
The following users liked this post:
georgehafe (10-31-2017)
#10
Melting Slicks
^^^ Beautiful...looks like S. Rays work ..tried to read the name but couldn't quite make it out. No matter who did it though, its beautiful !
Last edited by Steve Garrett; 10-31-2017 at 05:05 PM.
#11
Instructor
The following 2 users liked this post by ratboyusn:
georgehafe (10-24-2017),
Maxie2U (10-25-2017)
The following 2 users liked this post by ratboyusn:
georgehafe (10-31-2017),
Maxie2U (10-25-2017)
#14
Melting Slicks
Steve Ray is the owner of airbrush incorporated.
http://www.airbrushincorporated.com
He’s a busy busy man, but his work is second to none!
http://www.airbrushincorporated.com
He’s a busy busy man, but his work is second to none!
The following users liked this post:
georgehafe (10-31-2017)
The following users liked this post:
georgehafe (10-31-2017)