Ivan Tampi ZR1 bumper for C7, Z06, GS
The following users liked this post:
Paul Butler (04-14-2020)
#63
Very nice but it looks like a blasphemy fusion of a Stingray and a Lamborgini!
But its amazing!
How much is the cost for everything installation and paint job?
But its amazing!
How much is the cost for everything installation and paint job?
#64
Team Owner
Member Since: Jan 2007
Location: cookeville tennessee
Posts: 28,846
Received 1,762 Likes
on
1,529 Posts
ttt
When do you think this piece will be out to us to put onto the cars. Give me a message on price after you have it out. Robert
The following users liked this post:
Ivantampi (07-13-2018)
#70
Racer
Thread Starter
#71
Melting Slicks
Where does all the air go that is jamming into the cheeks? I'd have to add the LG radiators in the cheeks if I did this mod, otherwise you are just slowing yourself down to look like a zr1. I wonder how much lift those create? People but a lot of work into creating aerodynamics. The corvette engineers didnt have a lot of air coming in for a reason on the z06. The zr1 basically overcomes the problem with pure brute strength and a wing under the front and on the back...
#72
Racer
Thread Starter
As as long as your rads are still getting air into them, this bumper shouldn't make a difference. It's not as open as the GS or Z06 mind you.
Where does all the air go that is jamming into the cheeks? I'd have to add the LG radiators in the cheeks if I did this mod, otherwise you are just slowing yourself down to look like a zr1. I wonder how much lift those create? People but a lot of work into creating aerodynamics. The corvette engineers didnt have a lot of air coming in for a reason on the z06. The zr1 basically overcomes the problem with pure brute strength and a wing under the front and on the back...
#74
Racer
Thread Starter
I may know a guy who can make it. It wouldn't be that hard to do really. The Huracan front bumper might be better in terms of breathing air into the radiators. Since the Hurrican has front radiators just like the Corvette has.
Last edited by GrandSport223; 04-27-2018 at 03:37 PM.
#75
Team Owner
Member Since: Jan 2007
Location: cookeville tennessee
Posts: 28,846
Received 1,762 Likes
on
1,529 Posts
It will be good to see what it turns out like for sure. I am still in if the price don't kill the deal on it.. Robert
#76
Former Vendor
Our XIK ZR1 is not fiberglass but is Polyurethane from a injection mold, it will be like a stock fitting!
#77
Former Vendor
The following users liked this post:
Ivantampi (07-13-2018)
#80
Former Vendor