Added roof stripe to extend stinger
#1
Burning Brakes
Thread Starter
Added roof stripe to extend stinger
I thought I had done the last of my mods months ago
Funny how you keep thinking of new ideas.
Decided to add a roof stripe to complement the factory hood stinger stripe.
Got the vinyl squeegee in the mail last night so decided to get it done today.
Rather than trying to cut the vinyl correctly and get it placed right on the roof,
I decided to use knifeless tape.
Simply mark off the design on the roof, place the knifeless tape where you want the stripe to go, place the vinyl down and than use the tape to cut out the correct design.If I ever need to replace the stinger stripe I feel comfortable to do it myself.
Total cost about $ 54.00.
squeegee was $5.00
Knifeless tape $18.00 (30 feet, I used about 8 ft.)
3M 1080 GP292 GLOSS GALAXY BLACK 5ft x 2ft (10 sq/ft) Car Wrap Vinyl Film $31.00
Funny how you keep thinking of new ideas.
Decided to add a roof stripe to complement the factory hood stinger stripe.
Got the vinyl squeegee in the mail last night so decided to get it done today.
Rather than trying to cut the vinyl correctly and get it placed right on the roof,
I decided to use knifeless tape.
Simply mark off the design on the roof, place the knifeless tape where you want the stripe to go, place the vinyl down and than use the tape to cut out the correct design.If I ever need to replace the stinger stripe I feel comfortable to do it myself.
Total cost about $ 54.00.
squeegee was $5.00
Knifeless tape $18.00 (30 feet, I used about 8 ft.)
3M 1080 GP292 GLOSS GALAXY BLACK 5ft x 2ft (10 sq/ft) Car Wrap Vinyl Film $31.00
Last edited by agapsdiver; 07-07-2018 at 03:45 PM.
The following 3 users liked this post by agapsdiver:
#2
Le Mans Master
Yeah, knifeless tape makes it a little easier. Nice job!
The following users liked this post:
agapsdiver (07-07-2018)
#3
Melting Slicks
Member Since: Jun 2005
Location: Rock Hill SC (Charlotte NC Area)
Posts: 2,363
Received 683 Likes
on
444 Posts
2022 C8 of the Year Finalist - Modified
2022 C7 of the Year Finalist - Unmodified
Added stripe looks good!
Always wondered if that knifeless tape worked as easy as they make it look on the various car customizing shows.
Always wondered if that knifeless tape worked as easy as they make it look on the various car customizing shows.
#4
Burning Brakes
Thread Starter
#7
Burning Brakes
I thought I had done the last of my mods months ago
Funny how you keep thinking of new ideas.
Decided to add a roof stripe to complement the factory hood stinger stripe.
Got the vinyl squeegee in the mail last night so decided to get it done today.
Rather than trying to cut the vinyl correctly and get it placed right on the roof,
I decided to use knifeless tape.
Simply mark off the design on the roof, place the knifeless tape where you want the stripe to go, place the vinyl down and than use the tape to cut out the correct design.If I ever need to replace the stinger stripe I feel comfortable to do it myself.
Total cost about $ 54.00.
Funny how you keep thinking of new ideas.
Decided to add a roof stripe to complement the factory hood stinger stripe.
Got the vinyl squeegee in the mail last night so decided to get it done today.
Rather than trying to cut the vinyl correctly and get it placed right on the roof,
I decided to use knifeless tape.
Simply mark off the design on the roof, place the knifeless tape where you want the stripe to go, place the vinyl down and than use the tape to cut out the correct design.If I ever need to replace the stinger stripe I feel comfortable to do it myself.
Total cost about $ 54.00.
I noticed that on the side of your car you put the old style Corvette Script Stingray logo above the fish logo. I'm going to do the same modification but I'm going to take off the Fish Emblem and replace it with the Script Stingray Emblem. I have already purchased the Script Stingray Emblems and removed the three pins.
My question is did you use the adhesive that was on the back of the emblem or did you something stronger?
And if you something else what was it?
And again the stripe looks great!
#8
Burning Brakes
Thread Starter
Nice job...it looks really good.
I noticed that on the side of your car you put the old style Corvette Script Stingray logo above the fish logo. I'm going to do the same modification but I'm going to take off the Fish Emblem and replace it with the Script Stingray Emblem. I have already purchased the Script Stingray Emblems and removed the three pins.
My question is did you use the adhesive that was on the back of the emblem or did you something stronger?
And if you something else what was it?
And again the stripe looks great!
I noticed that on the side of your car you put the old style Corvette Script Stingray logo above the fish logo. I'm going to do the same modification but I'm going to take off the Fish Emblem and replace it with the Script Stingray Emblem. I have already purchased the Script Stingray Emblems and removed the three pins.
My question is did you use the adhesive that was on the back of the emblem or did you something stronger?
And if you something else what was it?
And again the stripe looks great!
#10
Team Owner
Member Since: Oct 2013
Location: Kansas City, Missouri
Posts: 25,360
Received 7,752 Likes
on
4,181 Posts
CORVETTE TODAY Host
St. Jude Donor'15
Nice job....I've not seen louvers yet for a C7 either.
The following users liked this post:
agapsdiver (07-09-2018)
#11
Safety Car
Good job on the roof stripe, looks great!
Who sells the louvers?
Please provide a link to where you purchased them from. Thanks.
.
Who sells the louvers?
Please provide a link to where you purchased them from. Thanks.
.
#13
Burning Brakes
Thread Starter
Hardly not at all. I only see the two bottom louvers, the rest are above the line of sight.
The bottom louver perfectly outlines the wickerbill...with the sides at the height of the
spoiler.
So only the second louver from the bottom is really in the line of sight.. but it is extremely narrow and does not obstruct anything.
The bottom louver perfectly outlines the wickerbill...with the sides at the height of the
spoiler.
So only the second louver from the bottom is really in the line of sight.. but it is extremely narrow and does not obstruct anything.
Last edited by agapsdiver; 07-08-2018 at 01:01 PM.
#14
Team Owner
Nice job looks good.
#15
Instructor
Nice job! Looks great. I just put blade silver vinyl sides on an exposed carbon fiber top I picked up from a red c7. I also used the knife less tape, it works great.
Last edited by Cubby558; 07-08-2018 at 08:39 AM.
#16
Burning Brakes
Thread Starter
The following users liked this post:
agapsdiver (07-08-2018)
#19
Burning Brakes
Thread Starter
The closest I've been able to find. My OEM stinger is 4 1/2 years old. In sunlight you can't really tell
any diff. At night, shining a flashlight on both, the new 3m vinyl GP292 seems to have a little larger metallic flakes....
Not sure if this is the case or my OEM vinyl stinger is just getting older and may have some weathering..
But in daylight, on the street, is extremely close... I'm keeping it.
any diff. At night, shining a flashlight on both, the new 3m vinyl GP292 seems to have a little larger metallic flakes....
Not sure if this is the case or my OEM vinyl stinger is just getting older and may have some weathering..
But in daylight, on the street, is extremely close... I'm keeping it.
#20
Burning Brakes
This is why I love this Forum...it's guys (or girls) willing to help other guys (or girls) that they never even met.