C7 General Discussion General C7 Corvette Discussion not covered in Tech
Sponsored by:
Sponsored by:

2016 no front spoiler?

Thread Tools
 
Search this Thread
 
Old 09-24-2018, 02:58 PM
  #1  
Njja
Advanced
Thread Starter
 
Njja's Avatar
 
Member Since: Mar 2014
Location: Kennesaw GA
Posts: 69
Received 29 Likes on 6 Posts
Default 2016 no front spoiler?

I just had my 2016 Corvette with 4,000 miles up on a lift and I have no front spoiler. The bolts are there, and there are smaller spoilers in front of each tire but nothing in the center.
My dealer said this is how the 2016’s were equipped. Mine is a level 2 with performance exhaust and 460hp.
Does your 2016 have a chin spoiler or just the bolts?

No Spoiler in Center?
Old 09-24-2018, 03:00 PM
  #2  
KenHorse
Team Owner
 
KenHorse's Avatar
 
Member Since: Aug 2007
Location: I live my life by 2 rules. 1) Never share everything you know. 2)
Posts: 136,148
Received 2,401 Likes on 1,366 Posts
St. Jude Donor '11-'12-'13, '16-'17-'18

Default

Z51? If so, no center air dam

Last edited by KenHorse; 09-25-2018 at 01:57 PM.
The following users liked this post:
Njja (09-24-2018)
Old 09-24-2018, 03:46 PM
  #3  
Pineapple
Burning Brakes
 
Pineapple's Avatar
 
Member Since: Aug 2006
Location: Bay Area, CA
Posts: 1,174
Received 794 Likes on 381 Posts

Default

That’s normal. Z51’s do not have the front splitter. They have bottom flaps.
The following users liked this post:
Njja (09-24-2018)
Old 09-24-2018, 04:26 PM
  #4  
Blu-Beast
Pro
 
Blu-Beast's Avatar
 
Member Since: Jan 2018
Location: DFW Area TX
Posts: 642
Received 119 Likes on 73 Posts
Default

just get a poverty splitter...problem solve...






Last edited by Blu-Beast; 09-24-2018 at 04:30 PM.
Old 09-24-2018, 04:28 PM
  #5  
BrunoTheMellow
Tech Contributor
Support Corvetteforum!
 
BrunoTheMellow's Avatar
 
Member Since: Jan 2015
Posts: 5,588
Received 1,396 Likes on 999 Posts
Default

Jeez... those are the bolts to hold your undertray. Go to the dealership, do you see another z51 with a front splitter? Nope.
Old 09-24-2018, 05:44 PM
  #6  
Njja
Advanced
Thread Starter
 
Njja's Avatar
 
Member Since: Mar 2014
Location: Kennesaw GA
Posts: 69
Received 29 Likes on 6 Posts
Default

Originally Posted by Njja
Thanks everyone for the quick response. Yes the car is a Z51 which I did not know as I purchased it for my wife. I have a 2013 427 along with 11 other vehicles so I often have to refer to the quick instructions when it gets put into the rotation.
My first car was a 1961 Corvette back in 1967 and I usually had at least one in my garage over the years. I no longer turn wrenches on my vehicles but all my tools are still there.

Here are a couple of shots of my garages.





Last edited by Njja; 09-24-2018 at 09:53 PM.
Old 09-24-2018, 09:42 PM
  #7  
KenHorse
Team Owner
 
KenHorse's Avatar
 
Member Since: Aug 2007
Location: I live my life by 2 rules. 1) Never share everything you know. 2)
Posts: 136,148
Received 2,401 Likes on 1,366 Posts
St. Jude Donor '11-'12-'13, '16-'17-'18

Default

Not to nitpick but that missing piece is not a splitter, it is correctly called the air dam

Last edited by KenHorse; 09-25-2018 at 01:57 PM.
Old 09-24-2018, 11:57 PM
  #8  
SingleTrackMinded
Safety Car
Support Corvetteforum!
 
SingleTrackMinded's Avatar
 
Member Since: Jan 2018
Location: Mesa AZ
Posts: 3,940
Received 1,359 Likes on 903 Posts
Default

I will have a Stage 1 (Poverty) spoiler available for sale soon if you want one PM me.
Old 09-25-2018, 07:22 AM
  #9  
wrecker3
Melting Slicks
 
wrecker3's Avatar
 
Member Since: Nov 2003
Location: NEW WINDSOR NY
Posts: 2,379
Received 1,470 Likes on 741 Posts

Default



I added the Poverty Splitter painted in Carbon Flash !!
Old 09-25-2018, 07:30 AM
  #10  
rrsperry
Safety Car
 
rrsperry's Avatar
 
Member Since: Sep 2015
Posts: 4,786
Received 1,412 Likes on 737 Posts
Default

Originally Posted by KenHorse
Not to nitpick but that missing piece is not a splitter, it is correctly called the air damn
And you're wrong again..

That is a splitter. (a horizontal part the divides airflow)

https://geekymotorists.com/2017/05/2...ront-splitter/
Old 09-25-2018, 11:19 AM
  #11  
Njja
Advanced
Thread Starter
 
Njja's Avatar
 
Member Since: Mar 2014
Location: Kennesaw GA
Posts: 69
Received 29 Likes on 6 Posts
Default

No need to be overly concerned with the exact name of the part, I simply wondered why I had all the bolts in place and nothing attached to them. Seemed kind of pointless, as long as the car came that way it’s ok. I like to keep my vehicles stock ordering the options I would like when I buy them.
Nothing wrong with customization mind you, I did that when I was young, it’s just that the modern cars have so much horsepower, get terrific mileage, and are so comfortable, and handle so well why bother?
Old 09-25-2018, 12:10 PM
  #12  
JerryU
E-Ray, 3LZ, ZER, LIFT
Support Corvetteforum!
 
JerryU's Avatar
 
Member Since: Sep 2007
Location: NE South Carolina
Posts: 29,479
Received 9,619 Likes on 6,625 Posts

Default

Originally Posted by Njja
No need to be overly concerned with the exact name of the part, I simply wondered why I had all the bolts in place and nothing attached to them.

You still haven't said if you have a Z51!

Perhaps NOT for you since you think using the "right part name" is asking too much but I'll provide this post for others! Assuming you are really asking about the center air dam-which from your pic you don't have, this is what cars should and should not have one.

The C7 Z51, all years, never had a center air dam and after several years of obfuscating "marketing speak" the real issue as to why even Tadge finally admitted! It was because at very high speeds it promoted oversteer when they require understand at the limit! Remember the Corvair and Ralph Nadar’s overstated BS about oversteer!

My Grand Sport with the Stage 2 aero option package does not have a center air dam per a GM bulletin on the subject! It only has the two side air dams. Same for the Z06 with it the Stage 2 or 3 aero package. Here is where the confusion comes in! The Grand Sport and Z06 with the standard plastic poverty splitter and ¾ side skirts has a center air dam.

All base Stingrays have all three air dams, the center an two sides.

Last edited by JerryU; 09-25-2018 at 12:20 PM.
Old 09-25-2018, 12:30 PM
  #13  
Njja
Advanced
Thread Starter
 
Njja's Avatar
 
Member Since: Mar 2014
Location: Kennesaw GA
Posts: 69
Received 29 Likes on 6 Posts
Default

[QUOTE=JerryU;1598047301]You still haven't said if you have a Z51!

Excuse me, I clearly stated above that yes the car is a Z51.

I was simply asking a question from fellow Corvette owners which was answered to my satisfaction.

There is absolutely no need to get excited about air dam vs spoiler unless we are competing at the Indianapolis 500.

Chill Out!
The following 2 users liked this post by Njja:
beaversstonehaven (09-25-2018), ImpliedConsent (09-25-2018)
Old 09-25-2018, 12:45 PM
  #14  
thirtythird
Burning Brakes
 
thirtythird's Avatar
 
Member Since: Mar 2010
Location: Brighton Mi
Posts: 943
Received 158 Likes on 100 Posts

Default

[QUOTE=Njja;1598047447]
Originally Posted by JerryU
You still haven't said if you have a Z51!

Excuse me, I clearly stated above that yes the car is a Z51.

I was simply asking a question from fellow Corvette owners which was answered to my satisfaction.

There is absolutely no need to get excited about air dam vs spoiler unless we are competing at the Indianapolis 500.

Chill Out!
Originally Posted by JerryU
I have to laugh. For some reason I think JerryU uses periods and exclamation points about 50/50 when he posts. Not sure where that comes from, I've seen other people (not on the forum) do similar. Fascinating.

I have a z51 also and there was no center piece. I added the poverty splitter to complete the look. When I look at a C7 from the front and there is no center piece there it just looks odd. Seems like there is a huge amount of ground clearance there and I don't care for that look at all. It's like having a pair of jeans that are 4" too short.

Last edited by thirtythird; 09-25-2018 at 12:47 PM.
The following users liked this post:
Njja (09-25-2018)
Old 09-25-2018, 01:14 PM
  #15  
Motors5
Instructor
 
Motors5's Avatar
 
Member Since: Dec 2015
Posts: 165
Received 55 Likes on 30 Posts
Default


Yep, looks like the stern of a boat without a splitter! Get an ACS with undertray carbon flash painted!
Old 09-25-2018, 01:22 PM
  #16  
JerryU
E-Ray, 3LZ, ZER, LIFT
Support Corvetteforum!
 
JerryU's Avatar
 
Member Since: Sep 2007
Location: NE South Carolina
Posts: 29,479
Received 9,619 Likes on 6,625 Posts

Default

[QUOTE=Njja;1598047447]
Originally Posted by JerryU
You still haven't said if you have a Z51!

Excuse me, I clearly stated above that yes the car is a Z51.

There is absolutely no need to get excited about air dam vs spoiler unless we are competing at the Indianapolis 500.

Chill Out!
Sorry, did not see that as it was confounded with pic of your garage!
I'm always chilled but in a rush as finishing packing as going to the Ryder Cup!
Old 09-25-2018, 01:39 PM
  #17  
JerryU
E-Ray, 3LZ, ZER, LIFT
Support Corvetteforum!
 
JerryU's Avatar
 
Member Since: Sep 2007
Location: NE South Carolina
Posts: 29,479
Received 9,619 Likes on 6,625 Posts

Default

[QUOTE=thirtythird;1598047571]
Originally Posted by Njja
[LEFT]

I have to laugh. For some reason I think JerryU uses periods and exclamation points about 50/50 when he posts. Not sure where that comes from, I've seen other people (not on the forum) do similar. Fascinating.

I have a z51 also and there was no center piece. I added the poverty splitter to complete the look. When I look at a C7 from the front and there is no center piece there it just looks odd. Seems like there is a huge amount of ground clearance there and I don't care for that look at all. It's like having a pair of jeans that are 4" too short.
Yep, my preferences is giving talks where if you don't use voice inflexions and make it fun folks lose interest!

Funny, the two books I recently wrote for CarTech Pro Series (on automotive welding, etc) had some of my exclamation points BUT not as many as my posts! Surprised they let get them go through and they loved my Side Bars with advanced tech "stuff." Has many pics! Not the best the writing style but gets attention!

Below is a modified bulletin GM supplies to dealers to tell what part goes where! I purposely put the center air dam in larger print as it has been a question since GM eliminated it on the Z51 and didn't tell anyone the real reson why until several years later! Note I left off for space reasons as they were in another table that all standard C7s have all three air dams and all Z51's don't have the center one!

Having had a center air dam on my C6 Z51 I wondered what so have followed the issue very closely and site the info in posts as well as mag articles is this 7 page PDF: http://netwelding.com/Air_Dam.pdf

Tech support is included to show why at highway speed the air dam increases mpg! That why the Chevy Volt has one as low as that on the Vette! Their is an included quote from GM's chief aerodynamicist.


Last edited by JerryU; 09-25-2018 at 01:43 PM.

Get notified of new replies

To 2016 no front spoiler?

Old 09-25-2018, 01:43 PM
  #18  
Njja
Advanced
Thread Starter
 
Njja's Avatar
 
Member Since: Mar 2014
Location: Kennesaw GA
Posts: 69
Received 29 Likes on 6 Posts
Default

[left][QUOTE=thirtythird;1598047571]
Originally Posted by Njja


I have to laugh. For some reason I think JerryU uses periods and exclamation points about 50/50 when he posts. Not sure where that comes from, I've seen other people (not on the forum) do similar. Fascinating.

I have a z51 also and there was no center piece. I added the poverty splitter to complete the look. When I look at a C7 from the front and there is no center piece there it just looks odd. Seems like there is a huge amount of ground clearance there and I don't care for that look at all. It's like having a pair of jeans that are 4" too short.


I agree we had a friends Grandsport up on my lift looking for the source of an annoying odor he was experiencing. I was impressed with how buttoned up the underside of his car was. We did find water from his air conditioner was draining on his Cat so we thought once it got hot it might vaporize the water producing a scorched order.
When we were done I put my wife’s on the lift and discovered the missing center piece. My buddy had left so I went to my local dealer (Sunday) current models he had were equipped with center piece. So I turned to the Forum, helpful as always!
Old 09-25-2018, 01:45 PM
  #19  
Njja
Advanced
Thread Starter
 
Njja's Avatar
 
Member Since: Mar 2014
Location: Kennesaw GA
Posts: 69
Received 29 Likes on 6 Posts
Default

[left][QUOTE=JerryU;1598047844]
Originally Posted by Njja


Sorry, did not see that as it was confounded with pic of your garage!
I'm always chilled but in a rush as finishing packing as going to the Ryder Cup!


No problem! Hope you have a great time at the Cup.
The following users liked this post:
JerryU (09-25-2018)
Old 09-25-2018, 01:59 PM
  #20  
KenHorse
Team Owner
 
KenHorse's Avatar
 
Member Since: Aug 2007
Location: I live my life by 2 rules. 1) Never share everything you know. 2)
Posts: 136,148
Received 2,401 Likes on 1,366 Posts
St. Jude Donor '11-'12-'13, '16-'17-'18

Default

Originally Posted by rrsperry
And you're wrong again..

That is a splitter. (a horizontal part the divides airflow)

https://geekymotorists.com/2017/05/2...ront-splitter/
Take it up with GM (and everybody else). THEY call it "air dam"

https://www.google.com/search?q=air+...nt=firefox-b-1



Quick Reply: 2016 no front spoiler?



All times are GMT -4. The time now is 04:52 PM.