Pfadt Headers/w Billy Boat PRT/Bullet
12-12-2013, 09:43 AM
#1
Former Vendor
Thread Starter
Member Since: Feb 2010
Location: Longwood Florida
Posts: 28,247
Likes: 0
Received 32 Likes
on
28 Posts
St. Jude Donor '13
Pfadt Headers/w Billy Boat PRT/Bullet
C7 Corvette Headers (Tri-Y 1 7/8") X-Pipe, Gasket, O2 Sensor Extender Package with Cats
Pfadt Power Products now brings you a race-proven Tri-Y header design making more HP and Torque at an affordable price!
1.875/2.125" tube diameter
CNC flanges with OEM locating features
Fully hand-TIG welded on-site
T-304 16 Gauge Stainless Steel
Fully Brushed Stainless Steel Finish
V-Band Clamp connections
Equal length long tubes
1-piece X-Pipe available with high flow metal matrix Catalytic Converters
Full 3" collector and X-pipe
Comes with bullet-nosed flange bolts for installation
Comes with O2 Sensor extenders below
Comes with Cometic Multi-Layer Steel gasket upgrades below
Exhaust system with Cats is 24lbs lighter than factory
Exhaust system without Cats is 27lbs lighter than factory.
Made in Salt Lake City, Utah The Pfadt design takes proper exhaust flow to a new level by pairing non-adjacent cylinders together to create a super-scavenging effect with the 4-into-2-into-1 (Tri-Y) construction. In this system, the exhaust flow from individual cylinder pulses are optimized to suck air into the combustion chamber from the intake. This creates a much more efficient power curve that results in a greater amount of usable torque (called torque under the curve) in the mid-range, while not sacrificing any top-end power for peak numbers.
Corvette C7 Billy Boat PRT Exhaust
The Billy Boat Performance Exhaust PRT C7 exhaust system is the latest in resonance control technology, completey redesigned and reengineered for the C7. You can now have a mellow, no-drone sound at cruising speeds and a crisp, clean, noticeable sport note when you're tearing up the streets
Dyno-proven horsepower and torque gains
Deep, aggressive exhaust note
Precision hand fabricated from CNC mandrel bent T304 stainless steel and TIG welded
Maintains the factory butterfly valve and 4-cylinder mode function
Made in the USA
Choice of Tips
4.5" Quad Oval
4" Quad Round
Speedway Tip
Corvette C7 Bullet
Since 1997 the Billy Boat Bullet Corvette exhaust has been the standard for deep, aggressive muscle car sound for you Corvette, and we have done it again for the C7. If that aggressive note is music to your ears, the Bullet is the only exhaust you need.
Deep, aggressive muscle car note
Precision hand fabricated from CNC mandrel bent T304 stainless steel and TIG welded
3" pipe diameter
Uses a B&B 3" buttlerfly valve for inproved flow and performance
Maintains the factory technology for 4 cylinder mode
Made in the USA
C7 3" Bullet 4.5" Quad Oval
C7 3" Bullet 4" Quad Round
C7 3" Bullet Speedway Tip
http://www.xplosiveperformance.com/1...t-_p_3624.html
FREE SHIPPING
LOWER US
Installed Now Till January 31, 2014
EARN 349 Reward Toward Future Purchases
Come Visit us at NCRS Winter Meet
January 22-26, 2014
OLD TOWN Kissimmee, FL
Pfadt Power Products now brings you a race-proven Tri-Y header design making more HP and Torque at an affordable price!
1.875/2.125" tube diameter
CNC flanges with OEM locating features
Fully hand-TIG welded on-site
T-304 16 Gauge Stainless Steel
Fully Brushed Stainless Steel Finish
V-Band Clamp connections
Equal length long tubes
1-piece X-Pipe available with high flow metal matrix Catalytic Converters
Full 3" collector and X-pipe
Comes with bullet-nosed flange bolts for installation
Comes with O2 Sensor extenders below
Comes with Cometic Multi-Layer Steel gasket upgrades below
Exhaust system with Cats is 24lbs lighter than factory
Exhaust system without Cats is 27lbs lighter than factory.
Made in Salt Lake City, Utah The Pfadt design takes proper exhaust flow to a new level by pairing non-adjacent cylinders together to create a super-scavenging effect with the 4-into-2-into-1 (Tri-Y) construction. In this system, the exhaust flow from individual cylinder pulses are optimized to suck air into the combustion chamber from the intake. This creates a much more efficient power curve that results in a greater amount of usable torque (called torque under the curve) in the mid-range, while not sacrificing any top-end power for peak numbers.
Corvette C7 Billy Boat PRT Exhaust
The Billy Boat Performance Exhaust PRT C7 exhaust system is the latest in resonance control technology, completey redesigned and reengineered for the C7. You can now have a mellow, no-drone sound at cruising speeds and a crisp, clean, noticeable sport note when you're tearing up the streets
Dyno-proven horsepower and torque gains
Deep, aggressive exhaust note
Precision hand fabricated from CNC mandrel bent T304 stainless steel and TIG welded
Maintains the factory butterfly valve and 4-cylinder mode function
Made in the USA
Choice of Tips
4.5" Quad Oval
4" Quad Round
Speedway Tip
Corvette C7 Bullet
Since 1997 the Billy Boat Bullet Corvette exhaust has been the standard for deep, aggressive muscle car sound for you Corvette, and we have done it again for the C7. If that aggressive note is music to your ears, the Bullet is the only exhaust you need.
Deep, aggressive muscle car note
Precision hand fabricated from CNC mandrel bent T304 stainless steel and TIG welded
3" pipe diameter
Uses a B&B 3" buttlerfly valve for inproved flow and performance
Maintains the factory technology for 4 cylinder mode
Made in the USA
C7 3" Bullet 4.5" Quad Oval
C7 3" Bullet 4" Quad Round
C7 3" Bullet Speedway Tip
http://www.xplosiveperformance.com/1...t-_p_3624.html
FREE SHIPPING
LOWER US
Installed Now Till January 31, 2014
EARN 349 Reward Toward Future Purchases
Come Visit us at NCRS Winter Meet
January 22-26, 2014
OLD TOWN Kissimmee, FL
12-14-2013, 06:21 AM
#2
Former Vendor
Thread Starter
Member Since: Feb 2010
Location: Longwood Florida
Posts: 28,247
Likes: 0
Received 32 Likes
on
28 Posts
St. Jude Donor '13
EARN YOUR REWARD POINTS FOR FUTURE PURCHASES EARN $1.00 for every $10.00 SpentORDER ON LINE AND SCHEDULE YOUR INSTALL
Join us on Facebook
12-18-2013, 10:05 AM
#3
Former Vendor
Thread Starter
Member Since: Feb 2010
Location: Longwood Florida
Posts: 28,247
Likes: 0
Received 32 Likes
on
28 Posts
St. Jude Donor '13
C7 Corvette Headers (Tri-Y 1 7/8") X-Pipe, Gasket, O2 Sensor Extender Package with Cats
Pfadt Power Products now brings you a race-proven Tri-Y header design making more HP and Torque at an affordable price!
1.875/2.125" tube diameter
CNC flanges with OEM locating features
Fully hand-TIG welded on-site
T-304 16 Gauge Stainless Steel
Fully Brushed Stainless Steel Finish
V-Band Clamp connections
Equal length long tubes
1-piece X-Pipe available with high flow metal matrix Catalytic Converters
Full 3" collector and X-pipe
Comes with bullet-nosed flange bolts for installation
Comes with O2 Sensor extenders below
Comes with Cometic Multi-Layer Steel gasket upgrades below
Exhaust system with Cats is 24lbs lighter than factory
Exhaust system without Cats is 27lbs lighter than factory.
Made in Salt Lake City, Utah The Pfadt design takes proper exhaust flow to a new level by pairing non-adjacent cylinders together to create a super-scavenging effect with the 4-into-2-into-1 (Tri-Y) construction. In this system, the exhaust flow from individual cylinder pulses are optimized to suck air into the combustion chamber from the intake. This creates a much more efficient power curve that results in a greater amount of usable torque (called torque under the curve) in the mid-range, while not sacrificing any top-end power for peak numbers.
Corvette C7 Billy Boat PRT Exhaust
The Billy Boat Performance Exhaust PRT C7 exhaust system is the latest in resonance control technology, completey redesigned and reengineered for the C7. You can now have a mellow, no-drone sound at cruising speeds and a crisp, clean, noticeable sport note when you're tearing up the streets
Dyno-proven horsepower and torque gains
Deep, aggressive exhaust note
Precision hand fabricated from CNC mandrel bent T304 stainless steel and TIG welded
Maintains the factory butterfly valve and 4-cylinder mode function
Made in the USA
Choice of Tips
4.5" Quad Oval
4" Quad Round
Speedway Tip
Corvette C7 Bullet
Since 1997 the Billy Boat Bullet Corvette exhaust has been the standard for deep, aggressive muscle car sound for you Corvette, and we have done it again for the C7. If that aggressive note is music to your ears, the Bullet is the only exhaust you need.
Deep, aggressive muscle car note
Precision hand fabricated from CNC mandrel bent T304 stainless steel and TIG welded
3" pipe diameter
Uses a B&B 3" buttlerfly valve for inproved flow and performance
Maintains the factory technology for 4 cylinder mode
Made in the USA
C7 3" Bullet 4.5" Quad Oval
C7 3" Bullet 4" Quad Round
C7 3" Bullet Speedway Tip
http://www.xplosiveperformance.com/1...t-_p_3624.html
FREE SHIPPING
LOWER US
Installed Now Till January 31, 2014
EARN 349 Reward Toward Future Purchases
Come Visit us at NCRS Winter Meet
January 22-26, 2014
OLD TOWN Kissimmee, FL
Pfadt Power Products now brings you a race-proven Tri-Y header design making more HP and Torque at an affordable price!
1.875/2.125" tube diameter
CNC flanges with OEM locating features
Fully hand-TIG welded on-site
T-304 16 Gauge Stainless Steel
Fully Brushed Stainless Steel Finish
V-Band Clamp connections
Equal length long tubes
1-piece X-Pipe available with high flow metal matrix Catalytic Converters
Full 3" collector and X-pipe
Comes with bullet-nosed flange bolts for installation
Comes with O2 Sensor extenders below
Comes with Cometic Multi-Layer Steel gasket upgrades below
Exhaust system with Cats is 24lbs lighter than factory
Exhaust system without Cats is 27lbs lighter than factory.
Made in Salt Lake City, Utah The Pfadt design takes proper exhaust flow to a new level by pairing non-adjacent cylinders together to create a super-scavenging effect with the 4-into-2-into-1 (Tri-Y) construction. In this system, the exhaust flow from individual cylinder pulses are optimized to suck air into the combustion chamber from the intake. This creates a much more efficient power curve that results in a greater amount of usable torque (called torque under the curve) in the mid-range, while not sacrificing any top-end power for peak numbers.
Corvette C7 Billy Boat PRT Exhaust
The Billy Boat Performance Exhaust PRT C7 exhaust system is the latest in resonance control technology, completey redesigned and reengineered for the C7. You can now have a mellow, no-drone sound at cruising speeds and a crisp, clean, noticeable sport note when you're tearing up the streets
Dyno-proven horsepower and torque gains
Deep, aggressive exhaust note
Precision hand fabricated from CNC mandrel bent T304 stainless steel and TIG welded
Maintains the factory butterfly valve and 4-cylinder mode function
Made in the USA
Choice of Tips
4.5" Quad Oval
4" Quad Round
Speedway Tip
Corvette C7 Bullet
Since 1997 the Billy Boat Bullet Corvette exhaust has been the standard for deep, aggressive muscle car sound for you Corvette, and we have done it again for the C7. If that aggressive note is music to your ears, the Bullet is the only exhaust you need.
Deep, aggressive muscle car note
Precision hand fabricated from CNC mandrel bent T304 stainless steel and TIG welded
3" pipe diameter
Uses a B&B 3" buttlerfly valve for inproved flow and performance
Maintains the factory technology for 4 cylinder mode
Made in the USA
C7 3" Bullet 4.5" Quad Oval
C7 3" Bullet 4" Quad Round
C7 3" Bullet Speedway Tip
http://www.xplosiveperformance.com/1...t-_p_3624.html
FREE SHIPPING
LOWER US
Installed Now Till January 31, 2014
EARN 349 Reward Toward Future Purchases
Come Visit us at NCRS Winter Meet
January 22-26, 2014
OLD TOWN Kissimmee, FL
12-21-2013, 12:23 PM
#4
Former Vendor
Thread Starter
Member Since: Feb 2010
Location: Longwood Florida
Posts: 28,247
Likes: 0
Received 32 Likes
on
28 Posts
St. Jude Donor '13
C7 Corvette Headers (Tri-Y 1 7/8") X-Pipe, Gasket, O2 Sensor Extender Package with Cats
Pfadt Power Products now brings you a race-proven Tri-Y header design making more HP and Torque at an affordable price!
1.875/2.125" tube diameter
CNC flanges with OEM locating features
Fully hand-TIG welded on-site
T-304 16 Gauge Stainless Steel
Fully Brushed Stainless Steel Finish
V-Band Clamp connections
Equal length long tubes
1-piece X-Pipe available with high flow metal matrix Catalytic Converters
Full 3" collector and X-pipe
Comes with bullet-nosed flange bolts for installation
Comes with O2 Sensor extenders below
Comes with Cometic Multi-Layer Steel gasket upgrades below
Exhaust system with Cats is 24lbs lighter than factory
Exhaust system without Cats is 27lbs lighter than factory.
Made in Salt Lake City, Utah The Pfadt design takes proper exhaust flow to a new level by pairing non-adjacent cylinders together to create a super-scavenging effect with the 4-into-2-into-1 (Tri-Y) construction. In this system, the exhaust flow from individual cylinder pulses are optimized to suck air into the combustion chamber from the intake. This creates a much more efficient power curve that results in a greater amount of usable torque (called torque under the curve) in the mid-range, while not sacrificing any top-end power for peak numbers.
Corvette C7 Billy Boat PRT Exhaust
The Billy Boat Performance Exhaust PRT C7 exhaust system is the latest in resonance control technology, completey redesigned and reengineered for the C7. You can now have a mellow, no-drone sound at cruising speeds and a crisp, clean, noticeable sport note when you're tearing up the streets
Dyno-proven horsepower and torque gains
Deep, aggressive exhaust note
Precision hand fabricated from CNC mandrel bent T304 stainless steel and TIG welded
Maintains the factory butterfly valve and 4-cylinder mode function
Made in the USA
Choice of Tips
4.5" Quad Oval
4" Quad Round
Speedway Tip
Corvette C7 Bullet
Since 1997 the Billy Boat Bullet Corvette exhaust has been the standard for deep, aggressive muscle car sound for you Corvette, and we have done it again for the C7. If that aggressive note is music to your ears, the Bullet is the only exhaust you need.
Deep, aggressive muscle car note
Precision hand fabricated from CNC mandrel bent T304 stainless steel and TIG welded
3" pipe diameter
Uses a B&B 3" buttlerfly valve for inproved flow and performance
Maintains the factory technology for 4 cylinder mode
Made in the USA
C7 3" Bullet 4.5" Quad Oval
C7 3" Bullet 4" Quad Round
C7 3" Bullet Speedway Tip
http://www.xplosiveperformance.com/1...t-_p_3624.html
FREE SHIPPING
LOWER US
Installed Now Till January 31, 2014
EARN 349 Reward Toward Future Purchases
Come Visit us at NCRS Winter Meet
January 22-26, 2014
OLD TOWN Kissimmee, FL
Pfadt Power Products now brings you a race-proven Tri-Y header design making more HP and Torque at an affordable price!
1.875/2.125" tube diameter
CNC flanges with OEM locating features
Fully hand-TIG welded on-site
T-304 16 Gauge Stainless Steel
Fully Brushed Stainless Steel Finish
V-Band Clamp connections
Equal length long tubes
1-piece X-Pipe available with high flow metal matrix Catalytic Converters
Full 3" collector and X-pipe
Comes with bullet-nosed flange bolts for installation
Comes with O2 Sensor extenders below
Comes with Cometic Multi-Layer Steel gasket upgrades below
Exhaust system with Cats is 24lbs lighter than factory
Exhaust system without Cats is 27lbs lighter than factory.
Made in Salt Lake City, Utah The Pfadt design takes proper exhaust flow to a new level by pairing non-adjacent cylinders together to create a super-scavenging effect with the 4-into-2-into-1 (Tri-Y) construction. In this system, the exhaust flow from individual cylinder pulses are optimized to suck air into the combustion chamber from the intake. This creates a much more efficient power curve that results in a greater amount of usable torque (called torque under the curve) in the mid-range, while not sacrificing any top-end power for peak numbers.
Corvette C7 Billy Boat PRT Exhaust
The Billy Boat Performance Exhaust PRT C7 exhaust system is the latest in resonance control technology, completey redesigned and reengineered for the C7. You can now have a mellow, no-drone sound at cruising speeds and a crisp, clean, noticeable sport note when you're tearing up the streets
Dyno-proven horsepower and torque gains
Deep, aggressive exhaust note
Precision hand fabricated from CNC mandrel bent T304 stainless steel and TIG welded
Maintains the factory butterfly valve and 4-cylinder mode function
Made in the USA
Choice of Tips
4.5" Quad Oval
4" Quad Round
Speedway Tip
Corvette C7 Bullet
Since 1997 the Billy Boat Bullet Corvette exhaust has been the standard for deep, aggressive muscle car sound for you Corvette, and we have done it again for the C7. If that aggressive note is music to your ears, the Bullet is the only exhaust you need.
Deep, aggressive muscle car note
Precision hand fabricated from CNC mandrel bent T304 stainless steel and TIG welded
3" pipe diameter
Uses a B&B 3" buttlerfly valve for inproved flow and performance
Maintains the factory technology for 4 cylinder mode
Made in the USA
C7 3" Bullet 4.5" Quad Oval
C7 3" Bullet 4" Quad Round
C7 3" Bullet Speedway Tip
http://www.xplosiveperformance.com/1...t-_p_3624.html
FREE SHIPPING
LOWER US
Installed Now Till January 31, 2014
EARN 349 Reward Toward Future Purchases
Come Visit us at NCRS Winter Meet
January 22-26, 2014
OLD TOWN Kissimmee, FL
12-29-2013, 12:50 PM
#5
Former Vendor
Thread Starter
Member Since: Feb 2010
Location: Longwood Florida
Posts: 28,247
Likes: 0
Received 32 Likes
on
28 Posts
St. Jude Donor '13
C7 Corvette Headers (Tri-Y 1 7/8") X-Pipe, Gasket, O2 Sensor Extender Package with Cats
Pfadt Power Products now brings you a race-proven Tri-Y header design making more HP and Torque at an affordable price!
1.875/2.125" tube diameter
CNC flanges with OEM locating features
Fully hand-TIG welded on-site
T-304 16 Gauge Stainless Steel
Fully Brushed Stainless Steel Finish
V-Band Clamp connections
Equal length long tubes
1-piece X-Pipe available with high flow metal matrix Catalytic Converters
Full 3" collector and X-pipe
Comes with bullet-nosed flange bolts for installation
Comes with O2 Sensor extenders below
Comes with Cometic Multi-Layer Steel gasket upgrades below
Exhaust system with Cats is 24lbs lighter than factory
Exhaust system without Cats is 27lbs lighter than factory.
Made in Salt Lake City, Utah The Pfadt design takes proper exhaust flow to a new level by pairing non-adjacent cylinders together to create a super-scavenging effect with the 4-into-2-into-1 (Tri-Y) construction. In this system, the exhaust flow from individual cylinder pulses are optimized to suck air into the combustion chamber from the intake. This creates a much more efficient power curve that results in a greater amount of usable torque (called torque under the curve) in the mid-range, while not sacrificing any top-end power for peak numbers.
Corvette C7 Billy Boat PRT Exhaust
The Billy Boat Performance Exhaust PRT C7 exhaust system is the latest in resonance control technology, completey redesigned and reengineered for the C7. You can now have a mellow, no-drone sound at cruising speeds and a crisp, clean, noticeable sport note when you're tearing up the streets
Dyno-proven horsepower and torque gains
Deep, aggressive exhaust note
Precision hand fabricated from CNC mandrel bent T304 stainless steel and TIG welded
Maintains the factory butterfly valve and 4-cylinder mode function
Made in the USA
Choice of Tips
4.5" Quad Oval
4" Quad Round
Speedway Tip
Corvette C7 Bullet
Since 1997 the Billy Boat Bullet Corvette exhaust has been the standard for deep, aggressive muscle car sound for you Corvette, and we have done it again for the C7. If that aggressive note is music to your ears, the Bullet is the only exhaust you need.
Deep, aggressive muscle car note
Precision hand fabricated from CNC mandrel bent T304 stainless steel and TIG welded
3" pipe diameter
Uses a B&B 3" buttlerfly valve for inproved flow and performance
Maintains the factory technology for 4 cylinder mode
Made in the USA
C7 3" Bullet 4.5" Quad Oval
C7 3" Bullet 4" Quad Round
C7 3" Bullet Speedway Tip
http://www.xplosiveperformance.com/1...t-_p_3624.html
FREE SHIPPING
LOWER US
Installed Now Till January 31, 2014
EARN 349 Reward Toward Future Purchases
Come Visit us at NCRS Winter Meet
January 22-26, 2014
OLD TOWN Kissimmee, FL
Pfadt Power Products now brings you a race-proven Tri-Y header design making more HP and Torque at an affordable price!
1.875/2.125" tube diameter
CNC flanges with OEM locating features
Fully hand-TIG welded on-site
T-304 16 Gauge Stainless Steel
Fully Brushed Stainless Steel Finish
V-Band Clamp connections
Equal length long tubes
1-piece X-Pipe available with high flow metal matrix Catalytic Converters
Full 3" collector and X-pipe
Comes with bullet-nosed flange bolts for installation
Comes with O2 Sensor extenders below
Comes with Cometic Multi-Layer Steel gasket upgrades below
Exhaust system with Cats is 24lbs lighter than factory
Exhaust system without Cats is 27lbs lighter than factory.
Made in Salt Lake City, Utah The Pfadt design takes proper exhaust flow to a new level by pairing non-adjacent cylinders together to create a super-scavenging effect with the 4-into-2-into-1 (Tri-Y) construction. In this system, the exhaust flow from individual cylinder pulses are optimized to suck air into the combustion chamber from the intake. This creates a much more efficient power curve that results in a greater amount of usable torque (called torque under the curve) in the mid-range, while not sacrificing any top-end power for peak numbers.
Corvette C7 Billy Boat PRT Exhaust
The Billy Boat Performance Exhaust PRT C7 exhaust system is the latest in resonance control technology, completey redesigned and reengineered for the C7. You can now have a mellow, no-drone sound at cruising speeds and a crisp, clean, noticeable sport note when you're tearing up the streets
Dyno-proven horsepower and torque gains
Deep, aggressive exhaust note
Precision hand fabricated from CNC mandrel bent T304 stainless steel and TIG welded
Maintains the factory butterfly valve and 4-cylinder mode function
Made in the USA
Choice of Tips
4.5" Quad Oval
4" Quad Round
Speedway Tip
Corvette C7 Bullet
Since 1997 the Billy Boat Bullet Corvette exhaust has been the standard for deep, aggressive muscle car sound for you Corvette, and we have done it again for the C7. If that aggressive note is music to your ears, the Bullet is the only exhaust you need.
Deep, aggressive muscle car note
Precision hand fabricated from CNC mandrel bent T304 stainless steel and TIG welded
3" pipe diameter
Uses a B&B 3" buttlerfly valve for inproved flow and performance
Maintains the factory technology for 4 cylinder mode
Made in the USA
C7 3" Bullet 4.5" Quad Oval
C7 3" Bullet 4" Quad Round
C7 3" Bullet Speedway Tip
http://www.xplosiveperformance.com/1...t-_p_3624.html
FREE SHIPPING
LOWER US
Installed Now Till January 31, 2014
EARN 349 Reward Toward Future Purchases
Come Visit us at NCRS Winter Meet
January 22-26, 2014
OLD TOWN Kissimmee, FL
12-31-2013, 09:42 AM
#6
Former Vendor
Thread Starter
Member Since: Feb 2010
Location: Longwood Florida
Posts: 28,247
Likes: 0
Received 32 Likes
on
28 Posts
St. Jude Donor '13
C7 Corvette Headers (Tri-Y 1 7/8") X-Pipe, Gasket, O2 Sensor Extender Package with Cats
Pfadt Power Products now brings you a race-proven Tri-Y header design making more HP and Torque at an affordable price!
1.875/2.125" tube diameter
CNC flanges with OEM locating features
Fully hand-TIG welded on-site
T-304 16 Gauge Stainless Steel
Fully Brushed Stainless Steel Finish
V-Band Clamp connections
Equal length long tubes
1-piece X-Pipe available with high flow metal matrix Catalytic Converters
Full 3" collector and X-pipe
Comes with bullet-nosed flange bolts for installation
Comes with O2 Sensor extenders below
Comes with Cometic Multi-Layer Steel gasket upgrades below
Exhaust system with Cats is 24lbs lighter than factory
Exhaust system without Cats is 27lbs lighter than factory.
Made in Salt Lake City, Utah The Pfadt design takes proper exhaust flow to a new level by pairing non-adjacent cylinders together to create a super-scavenging effect with the 4-into-2-into-1 (Tri-Y) construction. In this system, the exhaust flow from individual cylinder pulses are optimized to suck air into the combustion chamber from the intake. This creates a much more efficient power curve that results in a greater amount of usable torque (called torque under the curve) in the mid-range, while not sacrificing any top-end power for peak numbers.
Corvette C7 Billy Boat PRT Exhaust
The Billy Boat Performance Exhaust PRT C7 exhaust system is the latest in resonance control technology, completey redesigned and reengineered for the C7. You can now have a mellow, no-drone sound at cruising speeds and a crisp, clean, noticeable sport note when you're tearing up the streets
Dyno-proven horsepower and torque gains
Deep, aggressive exhaust note
Precision hand fabricated from CNC mandrel bent T304 stainless steel and TIG welded
Maintains the factory butterfly valve and 4-cylinder mode function
Made in the USA
Choice of Tips
4.5" Quad Oval
4" Quad Round
Speedway Tip
Corvette C7 Bullet
Since 1997 the Billy Boat Bullet Corvette exhaust has been the standard for deep, aggressive muscle car sound for you Corvette, and we have done it again for the C7. If that aggressive note is music to your ears, the Bullet is the only exhaust you need.
Deep, aggressive muscle car note
Precision hand fabricated from CNC mandrel bent T304 stainless steel and TIG welded
3" pipe diameter
Uses a B&B 3" buttlerfly valve for inproved flow and performance
Maintains the factory technology for 4 cylinder mode
Made in the USA
C7 3" Bullet 4.5" Quad Oval
C7 3" Bullet 4" Quad Round
C7 3" Bullet Speedway Tip
http://www.xplosiveperformance.com/1...t-_p_3624.html
FREE SHIPPING
LOWER US
Installed Now Till January 31, 2014
EARN 349 Reward Toward Future Purchases
Come Visit us at NCRS Winter Meet
January 22-26, 2014
OLD TOWN Kissimmee, FL
Pfadt Power Products now brings you a race-proven Tri-Y header design making more HP and Torque at an affordable price!
1.875/2.125" tube diameter
CNC flanges with OEM locating features
Fully hand-TIG welded on-site
T-304 16 Gauge Stainless Steel
Fully Brushed Stainless Steel Finish
V-Band Clamp connections
Equal length long tubes
1-piece X-Pipe available with high flow metal matrix Catalytic Converters
Full 3" collector and X-pipe
Comes with bullet-nosed flange bolts for installation
Comes with O2 Sensor extenders below
Comes with Cometic Multi-Layer Steel gasket upgrades below
Exhaust system with Cats is 24lbs lighter than factory
Exhaust system without Cats is 27lbs lighter than factory.
Made in Salt Lake City, Utah The Pfadt design takes proper exhaust flow to a new level by pairing non-adjacent cylinders together to create a super-scavenging effect with the 4-into-2-into-1 (Tri-Y) construction. In this system, the exhaust flow from individual cylinder pulses are optimized to suck air into the combustion chamber from the intake. This creates a much more efficient power curve that results in a greater amount of usable torque (called torque under the curve) in the mid-range, while not sacrificing any top-end power for peak numbers.
Corvette C7 Billy Boat PRT Exhaust
The Billy Boat Performance Exhaust PRT C7 exhaust system is the latest in resonance control technology, completey redesigned and reengineered for the C7. You can now have a mellow, no-drone sound at cruising speeds and a crisp, clean, noticeable sport note when you're tearing up the streets
Dyno-proven horsepower and torque gains
Deep, aggressive exhaust note
Precision hand fabricated from CNC mandrel bent T304 stainless steel and TIG welded
Maintains the factory butterfly valve and 4-cylinder mode function
Made in the USA
Choice of Tips
4.5" Quad Oval
4" Quad Round
Speedway Tip
Corvette C7 Bullet
Since 1997 the Billy Boat Bullet Corvette exhaust has been the standard for deep, aggressive muscle car sound for you Corvette, and we have done it again for the C7. If that aggressive note is music to your ears, the Bullet is the only exhaust you need.
Deep, aggressive muscle car note
Precision hand fabricated from CNC mandrel bent T304 stainless steel and TIG welded
3" pipe diameter
Uses a B&B 3" buttlerfly valve for inproved flow and performance
Maintains the factory technology for 4 cylinder mode
Made in the USA
C7 3" Bullet 4.5" Quad Oval
C7 3" Bullet 4" Quad Round
C7 3" Bullet Speedway Tip
http://www.xplosiveperformance.com/1...t-_p_3624.html
FREE SHIPPING
LOWER US
Installed Now Till January 31, 2014
EARN 349 Reward Toward Future Purchases
Come Visit us at NCRS Winter Meet
January 22-26, 2014
OLD TOWN Kissimmee, FL
01-02-2014, 08:46 AM
#7
Former Vendor
Thread Starter
Member Since: Feb 2010
Location: Longwood Florida
Posts: 28,247
Likes: 0
Received 32 Likes
on
28 Posts
St. Jude Donor '13
C7 Corvette Headers (Tri-Y 1 7/8") X-Pipe, Gasket, O2 Sensor Extender Package with Cats
Pfadt Power Products now brings you a race-proven Tri-Y header design making more HP and Torque at an affordable price!
1.875/2.125" tube diameter
CNC flanges with OEM locating features
Fully hand-TIG welded on-site
T-304 16 Gauge Stainless Steel
Fully Brushed Stainless Steel Finish
V-Band Clamp connections
Equal length long tubes
1-piece X-Pipe available with high flow metal matrix Catalytic Converters
Full 3" collector and X-pipe
Comes with bullet-nosed flange bolts for installation
Comes with O2 Sensor extenders below
Comes with Cometic Multi-Layer Steel gasket upgrades below
Exhaust system with Cats is 24lbs lighter than factory
Exhaust system without Cats is 27lbs lighter than factory.
Made in Salt Lake City, Utah The Pfadt design takes proper exhaust flow to a new level by pairing non-adjacent cylinders together to create a super-scavenging effect with the 4-into-2-into-1 (Tri-Y) construction. In this system, the exhaust flow from individual cylinder pulses are optimized to suck air into the combustion chamber from the intake. This creates a much more efficient power curve that results in a greater amount of usable torque (called torque under the curve) in the mid-range, while not sacrificing any top-end power for peak numbers.
Corvette C7 Billy Boat PRT Exhaust
The Billy Boat Performance Exhaust PRT C7 exhaust system is the latest in resonance control technology, completey redesigned and reengineered for the C7. You can now have a mellow, no-drone sound at cruising speeds and a crisp, clean, noticeable sport note when you're tearing up the streets
Dyno-proven horsepower and torque gains
Deep, aggressive exhaust note
Precision hand fabricated from CNC mandrel bent T304 stainless steel and TIG welded
Maintains the factory butterfly valve and 4-cylinder mode function
Made in the USA
Choice of Tips
4.5" Quad Oval
4" Quad Round
Speedway Tip
Corvette C7 Bullet
Since 1997 the Billy Boat Bullet Corvette exhaust has been the standard for deep, aggressive muscle car sound for you Corvette, and we have done it again for the C7. If that aggressive note is music to your ears, the Bullet is the only exhaust you need.
Deep, aggressive muscle car note
Precision hand fabricated from CNC mandrel bent T304 stainless steel and TIG welded
3" pipe diameter
Uses a B&B 3" buttlerfly valve for inproved flow and performance
Maintains the factory technology for 4 cylinder mode
Made in the USA
C7 3" Bullet 4.5" Quad Oval
C7 3" Bullet 4" Quad Round
C7 3" Bullet Speedway Tip
http://www.xplosiveperformance.com/1...t-_p_3624.html
FREE SHIPPING
LOWER US
Installed Now Till January 31, 2014
EARN 349 Reward Toward Future Purchases
Come Visit us at NCRS Winter Meet
January 22-26, 2014
OLD TOWN Kissimmee, FL
Pfadt Power Products now brings you a race-proven Tri-Y header design making more HP and Torque at an affordable price!
1.875/2.125" tube diameter
CNC flanges with OEM locating features
Fully hand-TIG welded on-site
T-304 16 Gauge Stainless Steel
Fully Brushed Stainless Steel Finish
V-Band Clamp connections
Equal length long tubes
1-piece X-Pipe available with high flow metal matrix Catalytic Converters
Full 3" collector and X-pipe
Comes with bullet-nosed flange bolts for installation
Comes with O2 Sensor extenders below
Comes with Cometic Multi-Layer Steel gasket upgrades below
Exhaust system with Cats is 24lbs lighter than factory
Exhaust system without Cats is 27lbs lighter than factory.
Made in Salt Lake City, Utah The Pfadt design takes proper exhaust flow to a new level by pairing non-adjacent cylinders together to create a super-scavenging effect with the 4-into-2-into-1 (Tri-Y) construction. In this system, the exhaust flow from individual cylinder pulses are optimized to suck air into the combustion chamber from the intake. This creates a much more efficient power curve that results in a greater amount of usable torque (called torque under the curve) in the mid-range, while not sacrificing any top-end power for peak numbers.
Corvette C7 Billy Boat PRT Exhaust
The Billy Boat Performance Exhaust PRT C7 exhaust system is the latest in resonance control technology, completey redesigned and reengineered for the C7. You can now have a mellow, no-drone sound at cruising speeds and a crisp, clean, noticeable sport note when you're tearing up the streets
Dyno-proven horsepower and torque gains
Deep, aggressive exhaust note
Precision hand fabricated from CNC mandrel bent T304 stainless steel and TIG welded
Maintains the factory butterfly valve and 4-cylinder mode function
Made in the USA
Choice of Tips
4.5" Quad Oval
4" Quad Round
Speedway Tip
Corvette C7 Bullet
Since 1997 the Billy Boat Bullet Corvette exhaust has been the standard for deep, aggressive muscle car sound for you Corvette, and we have done it again for the C7. If that aggressive note is music to your ears, the Bullet is the only exhaust you need.
Deep, aggressive muscle car note
Precision hand fabricated from CNC mandrel bent T304 stainless steel and TIG welded
3" pipe diameter
Uses a B&B 3" buttlerfly valve for inproved flow and performance
Maintains the factory technology for 4 cylinder mode
Made in the USA
C7 3" Bullet 4.5" Quad Oval
C7 3" Bullet 4" Quad Round
C7 3" Bullet Speedway Tip
http://www.xplosiveperformance.com/1...t-_p_3624.html
FREE SHIPPING
LOWER US
Installed Now Till January 31, 2014
EARN 349 Reward Toward Future Purchases
Come Visit us at NCRS Winter Meet
January 22-26, 2014
OLD TOWN Kissimmee, FL
01-04-2014, 03:31 PM
#8
Former Vendor
Thread Starter
Member Since: Feb 2010
Location: Longwood Florida
Posts: 28,247
Likes: 0
Received 32 Likes
on
28 Posts
St. Jude Donor '13
C7 Corvette Headers (Tri-Y 1 7/8") X-Pipe, Gasket, O2 Sensor Extender Package with Cats
Pfadt Power Products now brings you a race-proven Tri-Y header design making more HP and Torque at an affordable price!
1.875/2.125" tube diameter
CNC flanges with OEM locating features
Fully hand-TIG welded on-site
T-304 16 Gauge Stainless Steel
Fully Brushed Stainless Steel Finish
V-Band Clamp connections
Equal length long tubes
1-piece X-Pipe available with high flow metal matrix Catalytic Converters
Full 3" collector and X-pipe
Comes with bullet-nosed flange bolts for installation
Comes with O2 Sensor extenders below
Comes with Cometic Multi-Layer Steel gasket upgrades below
Exhaust system with Cats is 24lbs lighter than factory
Exhaust system without Cats is 27lbs lighter than factory.
Made in Salt Lake City, Utah The Pfadt design takes proper exhaust flow to a new level by pairing non-adjacent cylinders together to create a super-scavenging effect with the 4-into-2-into-1 (Tri-Y) construction. In this system, the exhaust flow from individual cylinder pulses are optimized to suck air into the combustion chamber from the intake. This creates a much more efficient power curve that results in a greater amount of usable torque (called torque under the curve) in the mid-range, while not sacrificing any top-end power for peak numbers.
Corvette C7 Billy Boat PRT Exhaust
The Billy Boat Performance Exhaust PRT C7 exhaust system is the latest in resonance control technology, completey redesigned and reengineered for the C7. You can now have a mellow, no-drone sound at cruising speeds and a crisp, clean, noticeable sport note when you're tearing up the streets
Dyno-proven horsepower and torque gains
Deep, aggressive exhaust note
Precision hand fabricated from CNC mandrel bent T304 stainless steel and TIG welded
Maintains the factory butterfly valve and 4-cylinder mode function
Made in the USA
Choice of Tips
4.5" Quad Oval
4" Quad Round
Speedway Tip
Corvette C7 Bullet
Since 1997 the Billy Boat Bullet Corvette exhaust has been the standard for deep, aggressive muscle car sound for you Corvette, and we have done it again for the C7. If that aggressive note is music to your ears, the Bullet is the only exhaust you need.
Deep, aggressive muscle car note
Precision hand fabricated from CNC mandrel bent T304 stainless steel and TIG welded
3" pipe diameter
Uses a B&B 3" buttlerfly valve for inproved flow and performance
Maintains the factory technology for 4 cylinder mode
Made in the USA
C7 3" Bullet 4.5" Quad Oval
C7 3" Bullet 4" Quad Round
C7 3" Bullet Speedway Tip
http://www.xplosiveperformance.com/1...t-_p_3624.html
FREE SHIPPING
LOWER US
Installed Now Till January 31, 2014
EARN 349 Reward Toward Future Purchases
Come Visit us at NCRS Winter Meet
January 22-26, 2014
OLD TOWN Kissimmee, FL
Pfadt Power Products now brings you a race-proven Tri-Y header design making more HP and Torque at an affordable price!
1.875/2.125" tube diameter
CNC flanges with OEM locating features
Fully hand-TIG welded on-site
T-304 16 Gauge Stainless Steel
Fully Brushed Stainless Steel Finish
V-Band Clamp connections
Equal length long tubes
1-piece X-Pipe available with high flow metal matrix Catalytic Converters
Full 3" collector and X-pipe
Comes with bullet-nosed flange bolts for installation
Comes with O2 Sensor extenders below
Comes with Cometic Multi-Layer Steel gasket upgrades below
Exhaust system with Cats is 24lbs lighter than factory
Exhaust system without Cats is 27lbs lighter than factory.
Made in Salt Lake City, Utah The Pfadt design takes proper exhaust flow to a new level by pairing non-adjacent cylinders together to create a super-scavenging effect with the 4-into-2-into-1 (Tri-Y) construction. In this system, the exhaust flow from individual cylinder pulses are optimized to suck air into the combustion chamber from the intake. This creates a much more efficient power curve that results in a greater amount of usable torque (called torque under the curve) in the mid-range, while not sacrificing any top-end power for peak numbers.
Corvette C7 Billy Boat PRT Exhaust
The Billy Boat Performance Exhaust PRT C7 exhaust system is the latest in resonance control technology, completey redesigned and reengineered for the C7. You can now have a mellow, no-drone sound at cruising speeds and a crisp, clean, noticeable sport note when you're tearing up the streets
Dyno-proven horsepower and torque gains
Deep, aggressive exhaust note
Precision hand fabricated from CNC mandrel bent T304 stainless steel and TIG welded
Maintains the factory butterfly valve and 4-cylinder mode function
Made in the USA
Choice of Tips
4.5" Quad Oval
4" Quad Round
Speedway Tip
Corvette C7 Bullet
Since 1997 the Billy Boat Bullet Corvette exhaust has been the standard for deep, aggressive muscle car sound for you Corvette, and we have done it again for the C7. If that aggressive note is music to your ears, the Bullet is the only exhaust you need.
Deep, aggressive muscle car note
Precision hand fabricated from CNC mandrel bent T304 stainless steel and TIG welded
3" pipe diameter
Uses a B&B 3" buttlerfly valve for inproved flow and performance
Maintains the factory technology for 4 cylinder mode
Made in the USA
C7 3" Bullet 4.5" Quad Oval
C7 3" Bullet 4" Quad Round
C7 3" Bullet Speedway Tip
http://www.xplosiveperformance.com/1...t-_p_3624.html
FREE SHIPPING
LOWER US
Installed Now Till January 31, 2014
EARN 349 Reward Toward Future Purchases
Come Visit us at NCRS Winter Meet
January 22-26, 2014
OLD TOWN Kissimmee, FL
01-06-2014, 10:10 AM
#9
Former Vendor
Thread Starter
Member Since: Feb 2010
Location: Longwood Florida
Posts: 28,247
Likes: 0
Received 32 Likes
on
28 Posts
St. Jude Donor '13
C7 Corvette Headers (Tri-Y 1 7/8") X-Pipe, Gasket, O2 Sensor Extender Package with Cats
Pfadt Power Products now brings you a race-proven Tri-Y header design making more HP and Torque at an affordable price!
1.875/2.125" tube diameter
CNC flanges with OEM locating features
Fully hand-TIG welded on-site
T-304 16 Gauge Stainless Steel
Fully Brushed Stainless Steel Finish
V-Band Clamp connections
Equal length long tubes
1-piece X-Pipe available with high flow metal matrix Catalytic Converters
Full 3" collector and X-pipe
Comes with bullet-nosed flange bolts for installation
Comes with O2 Sensor extenders below
Comes with Cometic Multi-Layer Steel gasket upgrades below
Exhaust system with Cats is 24lbs lighter than factory
Exhaust system without Cats is 27lbs lighter than factory.
Made in Salt Lake City, Utah The Pfadt design takes proper exhaust flow to a new level by pairing non-adjacent cylinders together to create a super-scavenging effect with the 4-into-2-into-1 (Tri-Y) construction. In this system, the exhaust flow from individual cylinder pulses are optimized to suck air into the combustion chamber from the intake. This creates a much more efficient power curve that results in a greater amount of usable torque (called torque under the curve) in the mid-range, while not sacrificing any top-end power for peak numbers.
Corvette C7 Billy Boat PRT Exhaust
The Billy Boat Performance Exhaust PRT C7 exhaust system is the latest in resonance control technology, completey redesigned and reengineered for the C7. You can now have a mellow, no-drone sound at cruising speeds and a crisp, clean, noticeable sport note when you're tearing up the streets
Dyno-proven horsepower and torque gains
Deep, aggressive exhaust note
Precision hand fabricated from CNC mandrel bent T304 stainless steel and TIG welded
Maintains the factory butterfly valve and 4-cylinder mode function
Made in the USA
Choice of Tips
4.5" Quad Oval
4" Quad Round
Speedway Tip
Corvette C7 Bullet
Since 1997 the Billy Boat Bullet Corvette exhaust has been the standard for deep, aggressive muscle car sound for you Corvette, and we have done it again for the C7. If that aggressive note is music to your ears, the Bullet is the only exhaust you need.
Deep, aggressive muscle car note
Precision hand fabricated from CNC mandrel bent T304 stainless steel and TIG welded
3" pipe diameter
Uses a B&B 3" buttlerfly valve for inproved flow and performance
Maintains the factory technology for 4 cylinder mode
Made in the USA
C7 3" Bullet 4.5" Quad Oval
C7 3" Bullet 4" Quad Round
C7 3" Bullet Speedway Tip
http://www.xplosiveperformance.com/1...t-_p_3624.html
FREE SHIPPING
LOWER US
Installed Now Till January 31, 2014
EARN 349 Reward Toward Future Purchases
Come Visit us at NCRS Winter Meet
January 22-26, 2014
OLD TOWN Kissimmee, FL
Pfadt Power Products now brings you a race-proven Tri-Y header design making more HP and Torque at an affordable price!
1.875/2.125" tube diameter
CNC flanges with OEM locating features
Fully hand-TIG welded on-site
T-304 16 Gauge Stainless Steel
Fully Brushed Stainless Steel Finish
V-Band Clamp connections
Equal length long tubes
1-piece X-Pipe available with high flow metal matrix Catalytic Converters
Full 3" collector and X-pipe
Comes with bullet-nosed flange bolts for installation
Comes with O2 Sensor extenders below
Comes with Cometic Multi-Layer Steel gasket upgrades below
Exhaust system with Cats is 24lbs lighter than factory
Exhaust system without Cats is 27lbs lighter than factory.
Made in Salt Lake City, Utah The Pfadt design takes proper exhaust flow to a new level by pairing non-adjacent cylinders together to create a super-scavenging effect with the 4-into-2-into-1 (Tri-Y) construction. In this system, the exhaust flow from individual cylinder pulses are optimized to suck air into the combustion chamber from the intake. This creates a much more efficient power curve that results in a greater amount of usable torque (called torque under the curve) in the mid-range, while not sacrificing any top-end power for peak numbers.
Corvette C7 Billy Boat PRT Exhaust
The Billy Boat Performance Exhaust PRT C7 exhaust system is the latest in resonance control technology, completey redesigned and reengineered for the C7. You can now have a mellow, no-drone sound at cruising speeds and a crisp, clean, noticeable sport note when you're tearing up the streets
Dyno-proven horsepower and torque gains
Deep, aggressive exhaust note
Precision hand fabricated from CNC mandrel bent T304 stainless steel and TIG welded
Maintains the factory butterfly valve and 4-cylinder mode function
Made in the USA
Choice of Tips
4.5" Quad Oval
4" Quad Round
Speedway Tip
Corvette C7 Bullet
Since 1997 the Billy Boat Bullet Corvette exhaust has been the standard for deep, aggressive muscle car sound for you Corvette, and we have done it again for the C7. If that aggressive note is music to your ears, the Bullet is the only exhaust you need.
Deep, aggressive muscle car note
Precision hand fabricated from CNC mandrel bent T304 stainless steel and TIG welded
3" pipe diameter
Uses a B&B 3" buttlerfly valve for inproved flow and performance
Maintains the factory technology for 4 cylinder mode
Made in the USA
C7 3" Bullet 4.5" Quad Oval
C7 3" Bullet 4" Quad Round
C7 3" Bullet Speedway Tip
http://www.xplosiveperformance.com/1...t-_p_3624.html
FREE SHIPPING
LOWER US
Installed Now Till January 31, 2014
EARN 349 Reward Toward Future Purchases
Come Visit us at NCRS Winter Meet
January 22-26, 2014
OLD TOWN Kissimmee, FL
01-08-2014, 09:25 AM
#10
Former Vendor
Thread Starter
Member Since: Feb 2010
Location: Longwood Florida
Posts: 28,247
Likes: 0
Received 32 Likes
on
28 Posts
St. Jude Donor '13
C7 Corvette Headers (Tri-Y 1 7/8") X-Pipe, Gasket, O2 Sensor Extender Package with Cats
Pfadt Power Products now brings you a race-proven Tri-Y header design making more HP and Torque at an affordable price!
1.875/2.125" tube diameter
CNC flanges with OEM locating features
Fully hand-TIG welded on-site
T-304 16 Gauge Stainless Steel
Fully Brushed Stainless Steel Finish
V-Band Clamp connections
Equal length long tubes
1-piece X-Pipe available with high flow metal matrix Catalytic Converters
Full 3" collector and X-pipe
Comes with bullet-nosed flange bolts for installation
Comes with O2 Sensor extenders below
Comes with Cometic Multi-Layer Steel gasket upgrades below
Exhaust system with Cats is 24lbs lighter than factory
Exhaust system without Cats is 27lbs lighter than factory.
Made in Salt Lake City, Utah The Pfadt design takes proper exhaust flow to a new level by pairing non-adjacent cylinders together to create a super-scavenging effect with the 4-into-2-into-1 (Tri-Y) construction. In this system, the exhaust flow from individual cylinder pulses are optimized to suck air into the combustion chamber from the intake. This creates a much more efficient power curve that results in a greater amount of usable torque (called torque under the curve) in the mid-range, while not sacrificing any top-end power for peak numbers.
Corvette C7 Billy Boat PRT Exhaust
The Billy Boat Performance Exhaust PRT C7 exhaust system is the latest in resonance control technology, completey redesigned and reengineered for the C7. You can now have a mellow, no-drone sound at cruising speeds and a crisp, clean, noticeable sport note when you're tearing up the streets
Dyno-proven horsepower and torque gains
Deep, aggressive exhaust note
Precision hand fabricated from CNC mandrel bent T304 stainless steel and TIG welded
Maintains the factory butterfly valve and 4-cylinder mode function
Made in the USA
Choice of Tips
4.5" Quad Oval
4" Quad Round
Speedway Tip
Corvette C7 Bullet
Since 1997 the Billy Boat Bullet Corvette exhaust has been the standard for deep, aggressive muscle car sound for you Corvette, and we have done it again for the C7. If that aggressive note is music to your ears, the Bullet is the only exhaust you need.
Deep, aggressive muscle car note
Precision hand fabricated from CNC mandrel bent T304 stainless steel and TIG welded
3" pipe diameter
Uses a B&B 3" buttlerfly valve for inproved flow and performance
Maintains the factory technology for 4 cylinder mode
Made in the USA
C7 3" Bullet 4.5" Quad Oval
C7 3" Bullet 4" Quad Round
C7 3" Bullet Speedway Tip
http://www.xplosiveperformance.com/1...t-_p_3624.html
FREE SHIPPING
LOWER US
Installed Now Till January 31, 2014
EARN 349 Reward Toward Future Purchases
Come Visit us at NCRS Winter Meet
January 22-26, 2014
OLD TOWN Kissimmee, FL
Pfadt Power Products now brings you a race-proven Tri-Y header design making more HP and Torque at an affordable price!
1.875/2.125" tube diameter
CNC flanges with OEM locating features
Fully hand-TIG welded on-site
T-304 16 Gauge Stainless Steel
Fully Brushed Stainless Steel Finish
V-Band Clamp connections
Equal length long tubes
1-piece X-Pipe available with high flow metal matrix Catalytic Converters
Full 3" collector and X-pipe
Comes with bullet-nosed flange bolts for installation
Comes with O2 Sensor extenders below
Comes with Cometic Multi-Layer Steel gasket upgrades below
Exhaust system with Cats is 24lbs lighter than factory
Exhaust system without Cats is 27lbs lighter than factory.
Made in Salt Lake City, Utah The Pfadt design takes proper exhaust flow to a new level by pairing non-adjacent cylinders together to create a super-scavenging effect with the 4-into-2-into-1 (Tri-Y) construction. In this system, the exhaust flow from individual cylinder pulses are optimized to suck air into the combustion chamber from the intake. This creates a much more efficient power curve that results in a greater amount of usable torque (called torque under the curve) in the mid-range, while not sacrificing any top-end power for peak numbers.
Corvette C7 Billy Boat PRT Exhaust
The Billy Boat Performance Exhaust PRT C7 exhaust system is the latest in resonance control technology, completey redesigned and reengineered for the C7. You can now have a mellow, no-drone sound at cruising speeds and a crisp, clean, noticeable sport note when you're tearing up the streets
Dyno-proven horsepower and torque gains
Deep, aggressive exhaust note
Precision hand fabricated from CNC mandrel bent T304 stainless steel and TIG welded
Maintains the factory butterfly valve and 4-cylinder mode function
Made in the USA
Choice of Tips
4.5" Quad Oval
4" Quad Round
Speedway Tip
Corvette C7 Bullet
Since 1997 the Billy Boat Bullet Corvette exhaust has been the standard for deep, aggressive muscle car sound for you Corvette, and we have done it again for the C7. If that aggressive note is music to your ears, the Bullet is the only exhaust you need.
Deep, aggressive muscle car note
Precision hand fabricated from CNC mandrel bent T304 stainless steel and TIG welded
3" pipe diameter
Uses a B&B 3" buttlerfly valve for inproved flow and performance
Maintains the factory technology for 4 cylinder mode
Made in the USA
C7 3" Bullet 4.5" Quad Oval
C7 3" Bullet 4" Quad Round
C7 3" Bullet Speedway Tip
http://www.xplosiveperformance.com/1...t-_p_3624.html
FREE SHIPPING
LOWER US
Installed Now Till January 31, 2014
EARN 349 Reward Toward Future Purchases
Come Visit us at NCRS Winter Meet
January 22-26, 2014
OLD TOWN Kissimmee, FL
01-10-2014, 08:42 AM
#11
Former Vendor
Thread Starter
Member Since: Feb 2010
Location: Longwood Florida
Posts: 28,247
Likes: 0
Received 32 Likes
on
28 Posts
St. Jude Donor '13
C7 Corvette Headers (Tri-Y 1 7/8") X-Pipe, Gasket, O2 Sensor Extender Package with Cats
Pfadt Power Products now brings you a race-proven Tri-Y header design making more HP and Torque at an affordable price!
1.875/2.125" tube diameter
CNC flanges with OEM locating features
Fully hand-TIG welded on-site
T-304 16 Gauge Stainless Steel
Fully Brushed Stainless Steel Finish
V-Band Clamp connections
Equal length long tubes
1-piece X-Pipe available with high flow metal matrix Catalytic Converters
Full 3" collector and X-pipe
Comes with bullet-nosed flange bolts for installation
Comes with O2 Sensor extenders below
Comes with Cometic Multi-Layer Steel gasket upgrades below
Exhaust system with Cats is 24lbs lighter than factory
Exhaust system without Cats is 27lbs lighter than factory.
Made in Salt Lake City, Utah The Pfadt design takes proper exhaust flow to a new level by pairing non-adjacent cylinders together to create a super-scavenging effect with the 4-into-2-into-1 (Tri-Y) construction. In this system, the exhaust flow from individual cylinder pulses are optimized to suck air into the combustion chamber from the intake. This creates a much more efficient power curve that results in a greater amount of usable torque (called torque under the curve) in the mid-range, while not sacrificing any top-end power for peak numbers.
Corvette C7 Billy Boat PRT Exhaust
The Billy Boat Performance Exhaust PRT C7 exhaust system is the latest in resonance control technology, completey redesigned and reengineered for the C7. You can now have a mellow, no-drone sound at cruising speeds and a crisp, clean, noticeable sport note when you're tearing up the streets
Dyno-proven horsepower and torque gains
Deep, aggressive exhaust note
Precision hand fabricated from CNC mandrel bent T304 stainless steel and TIG welded
Maintains the factory butterfly valve and 4-cylinder mode function
Made in the USA
Choice of Tips
4.5" Quad Oval
4" Quad Round
Speedway Tip
Corvette C7 Bullet
Since 1997 the Billy Boat Bullet Corvette exhaust has been the standard for deep, aggressive muscle car sound for you Corvette, and we have done it again for the C7. If that aggressive note is music to your ears, the Bullet is the only exhaust you need.
Deep, aggressive muscle car note
Precision hand fabricated from CNC mandrel bent T304 stainless steel and TIG welded
3" pipe diameter
Uses a B&B 3" buttlerfly valve for inproved flow and performance
Maintains the factory technology for 4 cylinder mode
Made in the USA
C7 3" Bullet 4.5" Quad Oval
C7 3" Bullet 4" Quad Round
C7 3" Bullet Speedway Tip
http://www.xplosiveperformance.com/1...t-_p_3624.html
FREE SHIPPING
LOWER US
Installed Now Till January 31, 2014
EARN 349 Reward Toward Future Purchases
Come Visit us at NCRS Winter Meet
January 22-26, 2014
OLD TOWN Kissimmee, FL
Pfadt Power Products now brings you a race-proven Tri-Y header design making more HP and Torque at an affordable price!
1.875/2.125" tube diameter
CNC flanges with OEM locating features
Fully hand-TIG welded on-site
T-304 16 Gauge Stainless Steel
Fully Brushed Stainless Steel Finish
V-Band Clamp connections
Equal length long tubes
1-piece X-Pipe available with high flow metal matrix Catalytic Converters
Full 3" collector and X-pipe
Comes with bullet-nosed flange bolts for installation
Comes with O2 Sensor extenders below
Comes with Cometic Multi-Layer Steel gasket upgrades below
Exhaust system with Cats is 24lbs lighter than factory
Exhaust system without Cats is 27lbs lighter than factory.
Made in Salt Lake City, Utah The Pfadt design takes proper exhaust flow to a new level by pairing non-adjacent cylinders together to create a super-scavenging effect with the 4-into-2-into-1 (Tri-Y) construction. In this system, the exhaust flow from individual cylinder pulses are optimized to suck air into the combustion chamber from the intake. This creates a much more efficient power curve that results in a greater amount of usable torque (called torque under the curve) in the mid-range, while not sacrificing any top-end power for peak numbers.
Corvette C7 Billy Boat PRT Exhaust
The Billy Boat Performance Exhaust PRT C7 exhaust system is the latest in resonance control technology, completey redesigned and reengineered for the C7. You can now have a mellow, no-drone sound at cruising speeds and a crisp, clean, noticeable sport note when you're tearing up the streets
Dyno-proven horsepower and torque gains
Deep, aggressive exhaust note
Precision hand fabricated from CNC mandrel bent T304 stainless steel and TIG welded
Maintains the factory butterfly valve and 4-cylinder mode function
Made in the USA
Choice of Tips
4.5" Quad Oval
4" Quad Round
Speedway Tip
Corvette C7 Bullet
Since 1997 the Billy Boat Bullet Corvette exhaust has been the standard for deep, aggressive muscle car sound for you Corvette, and we have done it again for the C7. If that aggressive note is music to your ears, the Bullet is the only exhaust you need.
Deep, aggressive muscle car note
Precision hand fabricated from CNC mandrel bent T304 stainless steel and TIG welded
3" pipe diameter
Uses a B&B 3" buttlerfly valve for inproved flow and performance
Maintains the factory technology for 4 cylinder mode
Made in the USA
C7 3" Bullet 4.5" Quad Oval
C7 3" Bullet 4" Quad Round
C7 3" Bullet Speedway Tip
http://www.xplosiveperformance.com/1...t-_p_3624.html
FREE SHIPPING
LOWER US
Installed Now Till January 31, 2014
EARN 349 Reward Toward Future Purchases
Come Visit us at NCRS Winter Meet
January 22-26, 2014
OLD TOWN Kissimmee, FL
01-12-2014, 03:27 PM
#12
Former Vendor
Thread Starter
Member Since: Feb 2010
Location: Longwood Florida
Posts: 28,247
Likes: 0
Received 32 Likes
on
28 Posts
St. Jude Donor '13
C7 Corvette Headers (Tri-Y 1 7/8") X-Pipe, Gasket, O2 Sensor Extender Package with Cats
Pfadt Power Products now brings you a race-proven Tri-Y header design making more HP and Torque at an affordable price!
1.875/2.125" tube diameter
CNC flanges with OEM locating features
Fully hand-TIG welded on-site
T-304 16 Gauge Stainless Steel
Fully Brushed Stainless Steel Finish
V-Band Clamp connections
Equal length long tubes
1-piece X-Pipe available with high flow metal matrix Catalytic Converters
Full 3" collector and X-pipe
Comes with bullet-nosed flange bolts for installation
Comes with O2 Sensor extenders below
Comes with Cometic Multi-Layer Steel gasket upgrades below
Exhaust system with Cats is 24lbs lighter than factory
Exhaust system without Cats is 27lbs lighter than factory.
Made in Salt Lake City, Utah The Pfadt design takes proper exhaust flow to a new level by pairing non-adjacent cylinders together to create a super-scavenging effect with the 4-into-2-into-1 (Tri-Y) construction. In this system, the exhaust flow from individual cylinder pulses are optimized to suck air into the combustion chamber from the intake. This creates a much more efficient power curve that results in a greater amount of usable torque (called torque under the curve) in the mid-range, while not sacrificing any top-end power for peak numbers.
Corvette C7 Billy Boat PRT Exhaust
The Billy Boat Performance Exhaust PRT C7 exhaust system is the latest in resonance control technology, completey redesigned and reengineered for the C7. You can now have a mellow, no-drone sound at cruising speeds and a crisp, clean, noticeable sport note when you're tearing up the streets
Dyno-proven horsepower and torque gains
Deep, aggressive exhaust note
Precision hand fabricated from CNC mandrel bent T304 stainless steel and TIG welded
Maintains the factory butterfly valve and 4-cylinder mode function
Made in the USA
Choice of Tips
4.5" Quad Oval
4" Quad Round
Speedway Tip
Corvette C7 Bullet
Since 1997 the Billy Boat Bullet Corvette exhaust has been the standard for deep, aggressive muscle car sound for you Corvette, and we have done it again for the C7. If that aggressive note is music to your ears, the Bullet is the only exhaust you need.
Deep, aggressive muscle car note
Precision hand fabricated from CNC mandrel bent T304 stainless steel and TIG welded
3" pipe diameter
Uses a B&B 3" buttlerfly valve for inproved flow and performance
Maintains the factory technology for 4 cylinder mode
Made in the USA
C7 3" Bullet 4.5" Quad Oval
C7 3" Bullet 4" Quad Round
C7 3" Bullet Speedway Tip
http://www.xplosiveperformance.com/1...t-_p_3624.html
FREE SHIPPING
LOWER US
Installed Now Till January 31, 2014
EARN 349 Reward Toward Future Purchases
Come Visit us at NCRS Winter Meet
January 22-26, 2014
OLD TOWN Kissimmee, FL
Pfadt Power Products now brings you a race-proven Tri-Y header design making more HP and Torque at an affordable price!
1.875/2.125" tube diameter
CNC flanges with OEM locating features
Fully hand-TIG welded on-site
T-304 16 Gauge Stainless Steel
Fully Brushed Stainless Steel Finish
V-Band Clamp connections
Equal length long tubes
1-piece X-Pipe available with high flow metal matrix Catalytic Converters
Full 3" collector and X-pipe
Comes with bullet-nosed flange bolts for installation
Comes with O2 Sensor extenders below
Comes with Cometic Multi-Layer Steel gasket upgrades below
Exhaust system with Cats is 24lbs lighter than factory
Exhaust system without Cats is 27lbs lighter than factory.
Made in Salt Lake City, Utah The Pfadt design takes proper exhaust flow to a new level by pairing non-adjacent cylinders together to create a super-scavenging effect with the 4-into-2-into-1 (Tri-Y) construction. In this system, the exhaust flow from individual cylinder pulses are optimized to suck air into the combustion chamber from the intake. This creates a much more efficient power curve that results in a greater amount of usable torque (called torque under the curve) in the mid-range, while not sacrificing any top-end power for peak numbers.
Corvette C7 Billy Boat PRT Exhaust
The Billy Boat Performance Exhaust PRT C7 exhaust system is the latest in resonance control technology, completey redesigned and reengineered for the C7. You can now have a mellow, no-drone sound at cruising speeds and a crisp, clean, noticeable sport note when you're tearing up the streets
Dyno-proven horsepower and torque gains
Deep, aggressive exhaust note
Precision hand fabricated from CNC mandrel bent T304 stainless steel and TIG welded
Maintains the factory butterfly valve and 4-cylinder mode function
Made in the USA
Choice of Tips
4.5" Quad Oval
4" Quad Round
Speedway Tip
Corvette C7 Bullet
Since 1997 the Billy Boat Bullet Corvette exhaust has been the standard for deep, aggressive muscle car sound for you Corvette, and we have done it again for the C7. If that aggressive note is music to your ears, the Bullet is the only exhaust you need.
Deep, aggressive muscle car note
Precision hand fabricated from CNC mandrel bent T304 stainless steel and TIG welded
3" pipe diameter
Uses a B&B 3" buttlerfly valve for inproved flow and performance
Maintains the factory technology for 4 cylinder mode
Made in the USA
C7 3" Bullet 4.5" Quad Oval
C7 3" Bullet 4" Quad Round
C7 3" Bullet Speedway Tip
http://www.xplosiveperformance.com/1...t-_p_3624.html
FREE SHIPPING
LOWER US
Installed Now Till January 31, 2014
EARN 349 Reward Toward Future Purchases
Come Visit us at NCRS Winter Meet
January 22-26, 2014
OLD TOWN Kissimmee, FL
01-14-2014, 08:39 AM
#13
Former Vendor
Thread Starter
Member Since: Feb 2010
Location: Longwood Florida
Posts: 28,247
Likes: 0
Received 32 Likes
on
28 Posts
St. Jude Donor '13
C7 Corvette Headers (Tri-Y 1 7/8") X-Pipe, Gasket, O2 Sensor Extender Package with Cats
Pfadt Power Products now brings you a race-proven Tri-Y header design making more HP and Torque at an affordable price!
1.875/2.125" tube diameter
CNC flanges with OEM locating features
Fully hand-TIG welded on-site
T-304 16 Gauge Stainless Steel
Fully Brushed Stainless Steel Finish
V-Band Clamp connections
Equal length long tubes
1-piece X-Pipe available with high flow metal matrix Catalytic Converters
Full 3" collector and X-pipe
Comes with bullet-nosed flange bolts for installation
Comes with O2 Sensor extenders below
Comes with Cometic Multi-Layer Steel gasket upgrades below
Exhaust system with Cats is 24lbs lighter than factory
Exhaust system without Cats is 27lbs lighter than factory.
Made in Salt Lake City, Utah The Pfadt design takes proper exhaust flow to a new level by pairing non-adjacent cylinders together to create a super-scavenging effect with the 4-into-2-into-1 (Tri-Y) construction. In this system, the exhaust flow from individual cylinder pulses are optimized to suck air into the combustion chamber from the intake. This creates a much more efficient power curve that results in a greater amount of usable torque (called torque under the curve) in the mid-range, while not sacrificing any top-end power for peak numbers.
Corvette C7 Billy Boat PRT Exhaust
The Billy Boat Performance Exhaust PRT C7 exhaust system is the latest in resonance control technology, completey redesigned and reengineered for the C7. You can now have a mellow, no-drone sound at cruising speeds and a crisp, clean, noticeable sport note when you're tearing up the streets
Dyno-proven horsepower and torque gains
Deep, aggressive exhaust note
Precision hand fabricated from CNC mandrel bent T304 stainless steel and TIG welded
Maintains the factory butterfly valve and 4-cylinder mode function
Made in the USA
Choice of Tips
4.5" Quad Oval
4" Quad Round
Speedway Tip
Corvette C7 Bullet
Since 1997 the Billy Boat Bullet Corvette exhaust has been the standard for deep, aggressive muscle car sound for you Corvette, and we have done it again for the C7. If that aggressive note is music to your ears, the Bullet is the only exhaust you need.
Deep, aggressive muscle car note
Precision hand fabricated from CNC mandrel bent T304 stainless steel and TIG welded
3" pipe diameter
Uses a B&B 3" buttlerfly valve for inproved flow and performance
Maintains the factory technology for 4 cylinder mode
Made in the USA
C7 3" Bullet 4.5" Quad Oval
C7 3" Bullet 4" Quad Round
C7 3" Bullet Speedway Tip
http://www.xplosiveperformance.com/1...t-_p_3624.html
FREE SHIPPING
LOWER US
Installed Now Till January 31, 2014
EARN 349 Reward Toward Future Purchases
Come Visit us at NCRS Winter Meet
January 22-26, 2014
OLD TOWN Kissimmee, FL
Pfadt Power Products now brings you a race-proven Tri-Y header design making more HP and Torque at an affordable price!
1.875/2.125" tube diameter
CNC flanges with OEM locating features
Fully hand-TIG welded on-site
T-304 16 Gauge Stainless Steel
Fully Brushed Stainless Steel Finish
V-Band Clamp connections
Equal length long tubes
1-piece X-Pipe available with high flow metal matrix Catalytic Converters
Full 3" collector and X-pipe
Comes with bullet-nosed flange bolts for installation
Comes with O2 Sensor extenders below
Comes with Cometic Multi-Layer Steel gasket upgrades below
Exhaust system with Cats is 24lbs lighter than factory
Exhaust system without Cats is 27lbs lighter than factory.
Made in Salt Lake City, Utah The Pfadt design takes proper exhaust flow to a new level by pairing non-adjacent cylinders together to create a super-scavenging effect with the 4-into-2-into-1 (Tri-Y) construction. In this system, the exhaust flow from individual cylinder pulses are optimized to suck air into the combustion chamber from the intake. This creates a much more efficient power curve that results in a greater amount of usable torque (called torque under the curve) in the mid-range, while not sacrificing any top-end power for peak numbers.
Corvette C7 Billy Boat PRT Exhaust
The Billy Boat Performance Exhaust PRT C7 exhaust system is the latest in resonance control technology, completey redesigned and reengineered for the C7. You can now have a mellow, no-drone sound at cruising speeds and a crisp, clean, noticeable sport note when you're tearing up the streets
Dyno-proven horsepower and torque gains
Deep, aggressive exhaust note
Precision hand fabricated from CNC mandrel bent T304 stainless steel and TIG welded
Maintains the factory butterfly valve and 4-cylinder mode function
Made in the USA
Choice of Tips
4.5" Quad Oval
4" Quad Round
Speedway Tip
Corvette C7 Bullet
Since 1997 the Billy Boat Bullet Corvette exhaust has been the standard for deep, aggressive muscle car sound for you Corvette, and we have done it again for the C7. If that aggressive note is music to your ears, the Bullet is the only exhaust you need.
Deep, aggressive muscle car note
Precision hand fabricated from CNC mandrel bent T304 stainless steel and TIG welded
3" pipe diameter
Uses a B&B 3" buttlerfly valve for inproved flow and performance
Maintains the factory technology for 4 cylinder mode
Made in the USA
C7 3" Bullet 4.5" Quad Oval
C7 3" Bullet 4" Quad Round
C7 3" Bullet Speedway Tip
http://www.xplosiveperformance.com/1...t-_p_3624.html
FREE SHIPPING
LOWER US
Installed Now Till January 31, 2014
EARN 349 Reward Toward Future Purchases
Come Visit us at NCRS Winter Meet
January 22-26, 2014
OLD TOWN Kissimmee, FL
01-17-2014, 09:10 AM
#14
Former Vendor
Thread Starter
Member Since: Feb 2010
Location: Longwood Florida
Posts: 28,247
Likes: 0
Received 32 Likes
on
28 Posts
St. Jude Donor '13
C7 Corvette Headers (Tri-Y 1 7/8") X-Pipe, Gasket, O2 Sensor Extender Package with Cats
Pfadt Power Products now brings you a race-proven Tri-Y header design making more HP and Torque at an affordable price!
1.875/2.125" tube diameter
CNC flanges with OEM locating features
Fully hand-TIG welded on-site
T-304 16 Gauge Stainless Steel
Fully Brushed Stainless Steel Finish
V-Band Clamp connections
Equal length long tubes
1-piece X-Pipe available with high flow metal matrix Catalytic Converters
Full 3" collector and X-pipe
Comes with bullet-nosed flange bolts for installation
Comes with O2 Sensor extenders below
Comes with Cometic Multi-Layer Steel gasket upgrades below
Exhaust system with Cats is 24lbs lighter than factory
Exhaust system without Cats is 27lbs lighter than factory.
Made in Salt Lake City, Utah The Pfadt design takes proper exhaust flow to a new level by pairing non-adjacent cylinders together to create a super-scavenging effect with the 4-into-2-into-1 (Tri-Y) construction. In this system, the exhaust flow from individual cylinder pulses are optimized to suck air into the combustion chamber from the intake. This creates a much more efficient power curve that results in a greater amount of usable torque (called torque under the curve) in the mid-range, while not sacrificing any top-end power for peak numbers.
Corvette C7 Billy Boat PRT Exhaust
The Billy Boat Performance Exhaust PRT C7 exhaust system is the latest in resonance control technology, completey redesigned and reengineered for the C7. You can now have a mellow, no-drone sound at cruising speeds and a crisp, clean, noticeable sport note when you're tearing up the streets
Dyno-proven horsepower and torque gains
Deep, aggressive exhaust note
Precision hand fabricated from CNC mandrel bent T304 stainless steel and TIG welded
Maintains the factory butterfly valve and 4-cylinder mode function
Made in the USA
Choice of Tips
4.5" Quad Oval
4" Quad Round
Speedway Tip
Corvette C7 Bullet
Since 1997 the Billy Boat Bullet Corvette exhaust has been the standard for deep, aggressive muscle car sound for you Corvette, and we have done it again for the C7. If that aggressive note is music to your ears, the Bullet is the only exhaust you need.
Deep, aggressive muscle car note
Precision hand fabricated from CNC mandrel bent T304 stainless steel and TIG welded
3" pipe diameter
Uses a B&B 3" buttlerfly valve for inproved flow and performance
Maintains the factory technology for 4 cylinder mode
Made in the USA
C7 3" Bullet 4.5" Quad Oval
C7 3" Bullet 4" Quad Round
C7 3" Bullet Speedway Tip
http://www.xplosiveperformance.com/1...t-_p_3624.html
FREE SHIPPING
LOWER US
Installed Now Till January 31, 2014
EARN 349 Reward Toward Future Purchases
Come Visit us at NCRS Winter Meet
January 22-26, 2014
OLD TOWN Kissimmee, FL
Pfadt Power Products now brings you a race-proven Tri-Y header design making more HP and Torque at an affordable price!
1.875/2.125" tube diameter
CNC flanges with OEM locating features
Fully hand-TIG welded on-site
T-304 16 Gauge Stainless Steel
Fully Brushed Stainless Steel Finish
V-Band Clamp connections
Equal length long tubes
1-piece X-Pipe available with high flow metal matrix Catalytic Converters
Full 3" collector and X-pipe
Comes with bullet-nosed flange bolts for installation
Comes with O2 Sensor extenders below
Comes with Cometic Multi-Layer Steel gasket upgrades below
Exhaust system with Cats is 24lbs lighter than factory
Exhaust system without Cats is 27lbs lighter than factory.
Made in Salt Lake City, Utah The Pfadt design takes proper exhaust flow to a new level by pairing non-adjacent cylinders together to create a super-scavenging effect with the 4-into-2-into-1 (Tri-Y) construction. In this system, the exhaust flow from individual cylinder pulses are optimized to suck air into the combustion chamber from the intake. This creates a much more efficient power curve that results in a greater amount of usable torque (called torque under the curve) in the mid-range, while not sacrificing any top-end power for peak numbers.
Corvette C7 Billy Boat PRT Exhaust
The Billy Boat Performance Exhaust PRT C7 exhaust system is the latest in resonance control technology, completey redesigned and reengineered for the C7. You can now have a mellow, no-drone sound at cruising speeds and a crisp, clean, noticeable sport note when you're tearing up the streets
Dyno-proven horsepower and torque gains
Deep, aggressive exhaust note
Precision hand fabricated from CNC mandrel bent T304 stainless steel and TIG welded
Maintains the factory butterfly valve and 4-cylinder mode function
Made in the USA
Choice of Tips
4.5" Quad Oval
4" Quad Round
Speedway Tip
Corvette C7 Bullet
Since 1997 the Billy Boat Bullet Corvette exhaust has been the standard for deep, aggressive muscle car sound for you Corvette, and we have done it again for the C7. If that aggressive note is music to your ears, the Bullet is the only exhaust you need.
Deep, aggressive muscle car note
Precision hand fabricated from CNC mandrel bent T304 stainless steel and TIG welded
3" pipe diameter
Uses a B&B 3" buttlerfly valve for inproved flow and performance
Maintains the factory technology for 4 cylinder mode
Made in the USA
C7 3" Bullet 4.5" Quad Oval
C7 3" Bullet 4" Quad Round
C7 3" Bullet Speedway Tip
http://www.xplosiveperformance.com/1...t-_p_3624.html
FREE SHIPPING
LOWER US
Installed Now Till January 31, 2014
EARN 349 Reward Toward Future Purchases
Come Visit us at NCRS Winter Meet
January 22-26, 2014
OLD TOWN Kissimmee, FL
01-21-2014, 08:46 AM
#15
Former Vendor
Thread Starter
Member Since: Feb 2010
Location: Longwood Florida
Posts: 28,247
Likes: 0
Received 32 Likes
on
28 Posts
St. Jude Donor '13
C7 Corvette Headers (Tri-Y 1 7/8") X-Pipe, Gasket, O2 Sensor Extender Package with Cats
Pfadt Power Products now brings you a race-proven Tri-Y header design making more HP and Torque at an affordable price!
1.875/2.125" tube diameter
CNC flanges with OEM locating features
Fully hand-TIG welded on-site
T-304 16 Gauge Stainless Steel
Fully Brushed Stainless Steel Finish
V-Band Clamp connections
Equal length long tubes
1-piece X-Pipe available with high flow metal matrix Catalytic Converters
Full 3" collector and X-pipe
Comes with bullet-nosed flange bolts for installation
Comes with O2 Sensor extenders below
Comes with Cometic Multi-Layer Steel gasket upgrades below
Exhaust system with Cats is 24lbs lighter than factory
Exhaust system without Cats is 27lbs lighter than factory.
Made in Salt Lake City, Utah The Pfadt design takes proper exhaust flow to a new level by pairing non-adjacent cylinders together to create a super-scavenging effect with the 4-into-2-into-1 (Tri-Y) construction. In this system, the exhaust flow from individual cylinder pulses are optimized to suck air into the combustion chamber from the intake. This creates a much more efficient power curve that results in a greater amount of usable torque (called torque under the curve) in the mid-range, while not sacrificing any top-end power for peak numbers.
Corvette C7 Billy Boat PRT Exhaust
The Billy Boat Performance Exhaust PRT C7 exhaust system is the latest in resonance control technology, completey redesigned and reengineered for the C7. You can now have a mellow, no-drone sound at cruising speeds and a crisp, clean, noticeable sport note when you're tearing up the streets
Dyno-proven horsepower and torque gains
Deep, aggressive exhaust note
Precision hand fabricated from CNC mandrel bent T304 stainless steel and TIG welded
Maintains the factory butterfly valve and 4-cylinder mode function
Made in the USA
Choice of Tips
4.5" Quad Oval
4" Quad Round
Speedway Tip
Corvette C7 Bullet
Since 1997 the Billy Boat Bullet Corvette exhaust has been the standard for deep, aggressive muscle car sound for you Corvette, and we have done it again for the C7. If that aggressive note is music to your ears, the Bullet is the only exhaust you need.
Deep, aggressive muscle car note
Precision hand fabricated from CNC mandrel bent T304 stainless steel and TIG welded
3" pipe diameter
Uses a B&B 3" buttlerfly valve for inproved flow and performance
Maintains the factory technology for 4 cylinder mode
Made in the USA
C7 3" Bullet 4.5" Quad Oval
C7 3" Bullet 4" Quad Round
C7 3" Bullet Speedway Tip
http://www.xplosiveperformance.com/1...t-_p_3624.html
FREE SHIPPING
LOWER US
Installed Now Till January 31, 2014
EARN 349 Reward Toward Future Purchases
Come Visit us at NCRS Winter Meet
January 22-26, 2014
OLD TOWN Kissimmee, FL
Pfadt Power Products now brings you a race-proven Tri-Y header design making more HP and Torque at an affordable price!
1.875/2.125" tube diameter
CNC flanges with OEM locating features
Fully hand-TIG welded on-site
T-304 16 Gauge Stainless Steel
Fully Brushed Stainless Steel Finish
V-Band Clamp connections
Equal length long tubes
1-piece X-Pipe available with high flow metal matrix Catalytic Converters
Full 3" collector and X-pipe
Comes with bullet-nosed flange bolts for installation
Comes with O2 Sensor extenders below
Comes with Cometic Multi-Layer Steel gasket upgrades below
Exhaust system with Cats is 24lbs lighter than factory
Exhaust system without Cats is 27lbs lighter than factory.
Made in Salt Lake City, Utah The Pfadt design takes proper exhaust flow to a new level by pairing non-adjacent cylinders together to create a super-scavenging effect with the 4-into-2-into-1 (Tri-Y) construction. In this system, the exhaust flow from individual cylinder pulses are optimized to suck air into the combustion chamber from the intake. This creates a much more efficient power curve that results in a greater amount of usable torque (called torque under the curve) in the mid-range, while not sacrificing any top-end power for peak numbers.
Corvette C7 Billy Boat PRT Exhaust
The Billy Boat Performance Exhaust PRT C7 exhaust system is the latest in resonance control technology, completey redesigned and reengineered for the C7. You can now have a mellow, no-drone sound at cruising speeds and a crisp, clean, noticeable sport note when you're tearing up the streets
Dyno-proven horsepower and torque gains
Deep, aggressive exhaust note
Precision hand fabricated from CNC mandrel bent T304 stainless steel and TIG welded
Maintains the factory butterfly valve and 4-cylinder mode function
Made in the USA
Choice of Tips
4.5" Quad Oval
4" Quad Round
Speedway Tip
Corvette C7 Bullet
Since 1997 the Billy Boat Bullet Corvette exhaust has been the standard for deep, aggressive muscle car sound for you Corvette, and we have done it again for the C7. If that aggressive note is music to your ears, the Bullet is the only exhaust you need.
Deep, aggressive muscle car note
Precision hand fabricated from CNC mandrel bent T304 stainless steel and TIG welded
3" pipe diameter
Uses a B&B 3" buttlerfly valve for inproved flow and performance
Maintains the factory technology for 4 cylinder mode
Made in the USA
C7 3" Bullet 4.5" Quad Oval
C7 3" Bullet 4" Quad Round
C7 3" Bullet Speedway Tip
http://www.xplosiveperformance.com/1...t-_p_3624.html
FREE SHIPPING
LOWER US
Installed Now Till January 31, 2014
EARN 349 Reward Toward Future Purchases
Come Visit us at NCRS Winter Meet
January 22-26, 2014
OLD TOWN Kissimmee, FL
01-23-2014, 06:40 PM
#16
Former Vendor
Thread Starter
Member Since: Feb 2010
Location: Longwood Florida
Posts: 28,247
Likes: 0
Received 32 Likes
on
28 Posts
St. Jude Donor '13
C7 Corvette Headers (Tri-Y 1 7/8") X-Pipe, Gasket, O2 Sensor Extender Package with Cats
Pfadt Power Products now brings you a race-proven Tri-Y header design making more HP and Torque at an affordable price!
1.875/2.125" tube diameter
CNC flanges with OEM locating features
Fully hand-TIG welded on-site
T-304 16 Gauge Stainless Steel
Fully Brushed Stainless Steel Finish
V-Band Clamp connections
Equal length long tubes
1-piece X-Pipe available with high flow metal matrix Catalytic Converters
Full 3" collector and X-pipe
Comes with bullet-nosed flange bolts for installation
Comes with O2 Sensor extenders below
Comes with Cometic Multi-Layer Steel gasket upgrades below
Exhaust system with Cats is 24lbs lighter than factory
Exhaust system without Cats is 27lbs lighter than factory.
Made in Salt Lake City, Utah The Pfadt design takes proper exhaust flow to a new level by pairing non-adjacent cylinders together to create a super-scavenging effect with the 4-into-2-into-1 (Tri-Y) construction. In this system, the exhaust flow from individual cylinder pulses are optimized to suck air into the combustion chamber from the intake. This creates a much more efficient power curve that results in a greater amount of usable torque (called torque under the curve) in the mid-range, while not sacrificing any top-end power for peak numbers.
Corvette C7 Billy Boat PRT Exhaust
The Billy Boat Performance Exhaust PRT C7 exhaust system is the latest in resonance control technology, completey redesigned and reengineered for the C7. You can now have a mellow, no-drone sound at cruising speeds and a crisp, clean, noticeable sport note when you're tearing up the streets
Dyno-proven horsepower and torque gains
Deep, aggressive exhaust note
Precision hand fabricated from CNC mandrel bent T304 stainless steel and TIG welded
Maintains the factory butterfly valve and 4-cylinder mode function
Made in the USA
Choice of Tips
4.5" Quad Oval
4" Quad Round
Speedway Tip
Corvette C7 Bullet
Since 1997 the Billy Boat Bullet Corvette exhaust has been the standard for deep, aggressive muscle car sound for you Corvette, and we have done it again for the C7. If that aggressive note is music to your ears, the Bullet is the only exhaust you need.
Deep, aggressive muscle car note
Precision hand fabricated from CNC mandrel bent T304 stainless steel and TIG welded
3" pipe diameter
Uses a B&B 3" buttlerfly valve for inproved flow and performance
Maintains the factory technology for 4 cylinder mode
Made in the USA
C7 3" Bullet 4.5" Quad Oval
C7 3" Bullet 4" Quad Round
C7 3" Bullet Speedway Tip
http://www.xplosiveperformance.com/1...t-_p_3624.html
FREE SHIPPING
LOWER US
Installed Now Till January 31, 2014
EARN 349 Reward Toward Future Purchases
Come Visit us at NCRS Winter Meet
January 22-26, 2014
OLD TOWN Kissimmee, FL
Pfadt Power Products now brings you a race-proven Tri-Y header design making more HP and Torque at an affordable price!
1.875/2.125" tube diameter
CNC flanges with OEM locating features
Fully hand-TIG welded on-site
T-304 16 Gauge Stainless Steel
Fully Brushed Stainless Steel Finish
V-Band Clamp connections
Equal length long tubes
1-piece X-Pipe available with high flow metal matrix Catalytic Converters
Full 3" collector and X-pipe
Comes with bullet-nosed flange bolts for installation
Comes with O2 Sensor extenders below
Comes with Cometic Multi-Layer Steel gasket upgrades below
Exhaust system with Cats is 24lbs lighter than factory
Exhaust system without Cats is 27lbs lighter than factory.
Made in Salt Lake City, Utah The Pfadt design takes proper exhaust flow to a new level by pairing non-adjacent cylinders together to create a super-scavenging effect with the 4-into-2-into-1 (Tri-Y) construction. In this system, the exhaust flow from individual cylinder pulses are optimized to suck air into the combustion chamber from the intake. This creates a much more efficient power curve that results in a greater amount of usable torque (called torque under the curve) in the mid-range, while not sacrificing any top-end power for peak numbers.
Corvette C7 Billy Boat PRT Exhaust
The Billy Boat Performance Exhaust PRT C7 exhaust system is the latest in resonance control technology, completey redesigned and reengineered for the C7. You can now have a mellow, no-drone sound at cruising speeds and a crisp, clean, noticeable sport note when you're tearing up the streets
Dyno-proven horsepower and torque gains
Deep, aggressive exhaust note
Precision hand fabricated from CNC mandrel bent T304 stainless steel and TIG welded
Maintains the factory butterfly valve and 4-cylinder mode function
Made in the USA
Choice of Tips
4.5" Quad Oval
4" Quad Round
Speedway Tip
Corvette C7 Bullet
Since 1997 the Billy Boat Bullet Corvette exhaust has been the standard for deep, aggressive muscle car sound for you Corvette, and we have done it again for the C7. If that aggressive note is music to your ears, the Bullet is the only exhaust you need.
Deep, aggressive muscle car note
Precision hand fabricated from CNC mandrel bent T304 stainless steel and TIG welded
3" pipe diameter
Uses a B&B 3" buttlerfly valve for inproved flow and performance
Maintains the factory technology for 4 cylinder mode
Made in the USA
C7 3" Bullet 4.5" Quad Oval
C7 3" Bullet 4" Quad Round
C7 3" Bullet Speedway Tip
http://www.xplosiveperformance.com/1...t-_p_3624.html
FREE SHIPPING
LOWER US
Installed Now Till January 31, 2014
EARN 349 Reward Toward Future Purchases
Come Visit us at NCRS Winter Meet
January 22-26, 2014
OLD TOWN Kissimmee, FL
01-28-2014, 08:08 AM
#17
Former Vendor
Thread Starter
Member Since: Feb 2010
Location: Longwood Florida
Posts: 28,247
Likes: 0
Received 32 Likes
on
28 Posts
St. Jude Donor '13
C7 Corvette Headers (Tri-Y 1 7/8") X-Pipe, Gasket, O2 Sensor Extender Package with Cats
Pfadt Power Products now brings you a race-proven Tri-Y header design making more HP and Torque at an affordable price!
1.875/2.125" tube diameter
CNC flanges with OEM locating features
Fully hand-TIG welded on-site
T-304 16 Gauge Stainless Steel
Fully Brushed Stainless Steel Finish
V-Band Clamp connections
Equal length long tubes
1-piece X-Pipe available with high flow metal matrix Catalytic Converters
Full 3" collector and X-pipe
Comes with bullet-nosed flange bolts for installation
Comes with O2 Sensor extenders below
Comes with Cometic Multi-Layer Steel gasket upgrades below
Exhaust system with Cats is 24lbs lighter than factory
Exhaust system without Cats is 27lbs lighter than factory.
Made in Salt Lake City, Utah The Pfadt design takes proper exhaust flow to a new level by pairing non-adjacent cylinders together to create a super-scavenging effect with the 4-into-2-into-1 (Tri-Y) construction. In this system, the exhaust flow from individual cylinder pulses are optimized to suck air into the combustion chamber from the intake. This creates a much more efficient power curve that results in a greater amount of usable torque (called torque under the curve) in the mid-range, while not sacrificing any top-end power for peak numbers.
Corvette C7 Billy Boat PRT Exhaust
The Billy Boat Performance Exhaust PRT C7 exhaust system is the latest in resonance control technology, completey redesigned and reengineered for the C7. You can now have a mellow, no-drone sound at cruising speeds and a crisp, clean, noticeable sport note when you're tearing up the streets
Dyno-proven horsepower and torque gains
Deep, aggressive exhaust note
Precision hand fabricated from CNC mandrel bent T304 stainless steel and TIG welded
Maintains the factory butterfly valve and 4-cylinder mode function
Made in the USA
Choice of Tips
4.5" Quad Oval
4" Quad Round
Speedway Tip
Corvette C7 Bullet
Since 1997 the Billy Boat Bullet Corvette exhaust has been the standard for deep, aggressive muscle car sound for you Corvette, and we have done it again for the C7. If that aggressive note is music to your ears, the Bullet is the only exhaust you need.
Deep, aggressive muscle car note
Precision hand fabricated from CNC mandrel bent T304 stainless steel and TIG welded
3" pipe diameter
Uses a B&B 3" buttlerfly valve for inproved flow and performance
Maintains the factory technology for 4 cylinder mode
Made in the USA
C7 3" Bullet 4.5" Quad Oval
C7 3" Bullet 4" Quad Round
C7 3" Bullet Speedway Tip
http://www.xplosiveperformance.com/1...t-_p_3624.html
FREE SHIPPING
LOWER US
Installed Now Till January 31, 2014
EARN 349 Reward Toward Future Purchases
Come Visit us at NCRS Winter Meet
January 22-26, 2014
OLD TOWN Kissimmee, FL
Pfadt Power Products now brings you a race-proven Tri-Y header design making more HP and Torque at an affordable price!
1.875/2.125" tube diameter
CNC flanges with OEM locating features
Fully hand-TIG welded on-site
T-304 16 Gauge Stainless Steel
Fully Brushed Stainless Steel Finish
V-Band Clamp connections
Equal length long tubes
1-piece X-Pipe available with high flow metal matrix Catalytic Converters
Full 3" collector and X-pipe
Comes with bullet-nosed flange bolts for installation
Comes with O2 Sensor extenders below
Comes with Cometic Multi-Layer Steel gasket upgrades below
Exhaust system with Cats is 24lbs lighter than factory
Exhaust system without Cats is 27lbs lighter than factory.
Made in Salt Lake City, Utah The Pfadt design takes proper exhaust flow to a new level by pairing non-adjacent cylinders together to create a super-scavenging effect with the 4-into-2-into-1 (Tri-Y) construction. In this system, the exhaust flow from individual cylinder pulses are optimized to suck air into the combustion chamber from the intake. This creates a much more efficient power curve that results in a greater amount of usable torque (called torque under the curve) in the mid-range, while not sacrificing any top-end power for peak numbers.
Corvette C7 Billy Boat PRT Exhaust
The Billy Boat Performance Exhaust PRT C7 exhaust system is the latest in resonance control technology, completey redesigned and reengineered for the C7. You can now have a mellow, no-drone sound at cruising speeds and a crisp, clean, noticeable sport note when you're tearing up the streets
Dyno-proven horsepower and torque gains
Deep, aggressive exhaust note
Precision hand fabricated from CNC mandrel bent T304 stainless steel and TIG welded
Maintains the factory butterfly valve and 4-cylinder mode function
Made in the USA
Choice of Tips
4.5" Quad Oval
4" Quad Round
Speedway Tip
Corvette C7 Bullet
Since 1997 the Billy Boat Bullet Corvette exhaust has been the standard for deep, aggressive muscle car sound for you Corvette, and we have done it again for the C7. If that aggressive note is music to your ears, the Bullet is the only exhaust you need.
Deep, aggressive muscle car note
Precision hand fabricated from CNC mandrel bent T304 stainless steel and TIG welded
3" pipe diameter
Uses a B&B 3" buttlerfly valve for inproved flow and performance
Maintains the factory technology for 4 cylinder mode
Made in the USA
C7 3" Bullet 4.5" Quad Oval
C7 3" Bullet 4" Quad Round
C7 3" Bullet Speedway Tip
http://www.xplosiveperformance.com/1...t-_p_3624.html
FREE SHIPPING
LOWER US
Installed Now Till January 31, 2014
EARN 349 Reward Toward Future Purchases
Come Visit us at NCRS Winter Meet
January 22-26, 2014
OLD TOWN Kissimmee, FL