C7 Corvette Stingray Z06 Style Side Skirts Now Available at RPI Designs!
#1
Platinum Supporting Vendor
Thread Starter
C7 Corvette Stingray Z06 Style Side Skirts Now Available at RPI Designs!
C7 Corvette
Stingray, Z06, Grand Sport
C7 Corvette Side Skirts Package - Z06 Style
Part #
C7-Z06SS1
These are manufactured from start to finish in our shop in Salem, Ohio
Website Link:
https://www.rpidesigns.com/shop/item.aspx?itemid=4943
Are you looking to give your C7 Corvette Stingray just a little more of an aggressive look?
Look no further than our Z06 Style side skirts and front splitters.
We offer our Z06 Style pieces in Carbon Flash Metallic to match the exterior trim pieces on your Stingray, we also offer them painted and 2014-2019 C7 Corvette body color, flat black, and Hydro-Carbon Fiber.
Our kit includes both side skirts and all hardware to install the package.
We've been making, painting and selling Corvette parts for over 15 years, we are so confident that you'll love your Z06 Style side skirts that we offer a
100% money-back guarantee
“This item is custom painted to order and requires additional time to paint and ship. Please refer to current painting time on main website page”
Use Coupon Code
RPICHRIS5
Online or by phone
and receive an Immediate Discount!
Here is the website link again...
Website Link:
https://www.rpidesigns.com/shop/item.aspx?itemid=4943
If you have any questions don't hesitate to ask.
Our customer service team is available through email:
rpi.designs.customerservice@gmail.comor,
Call
Toll-Free
888.257.8515
You can also,
Send our sales team an email at:
paulrpidesigns@gmail.com
Thank You!
__________________
Last edited by RPIDON; 01-14-2020 at 09:31 AM.
#2
Safety Car
#3
Platinum Supporting Vendor
Your Laguna Blue Stingray looks great...thanks for the pictures.
#4
Pro
Installed mine this past weekend and the install went perfect! I love the look! Thanks!
-M
-M
#5
Platinum Supporting Vendor
Thread Starter
#7
Platinum Supporting Vendor
Thread Starter
#8
Advanced
#9
Platinum Supporting Vendor
#11
Platinum Supporting Vendor
Thread Starter
#13
Melting Slicks
Quote
Item # C7-Z06SS1 Price $659.95, use coupon Code RPIDON on line or by phone and receive 10% off making the price $593.96 shipped!!!!!
Website Link : http://www.rpidesigns.com/shop/item.aspx?itemid=4943
Website Link : http://www.rpidesigns.com/shop/item.aspx?itemid=4943
Zo6 style side skirts and zo6 style front splitter
Carbon flash
#14
Platinum Supporting Vendor
#15
Melting Slicks
How hard are these to install? Can I do it at home?
#16
Platinum Supporting Vendor
#17
Melting Slicks
#18
Instructor
Installed the side rails today, next week is splitter and diffuser then body colored splash guards which are on order.
I did it by myself, used boxes and a spring clamp to hold the rockers in place until the screws were drilled in. Drilling is easy. Best if you can elevate the car, I used race ramps, 56 inch ones. Also need a 90 degree drill for the rear if only the front is elevated. The first one took about 50 minutes, the second about 30 minutes, I added some 3M double sided auto tape near the front and some silicone sealant where I saw any spaces under the car.
I did it by myself, used boxes and a spring clamp to hold the rockers in place until the screws were drilled in. Drilling is easy. Best if you can elevate the car, I used race ramps, 56 inch ones. Also need a 90 degree drill for the rear if only the front is elevated. The first one took about 50 minutes, the second about 30 minutes, I added some 3M double sided auto tape near the front and some silicone sealant where I saw any spaces under the car.
Last edited by Jakeman11; 04-19-2015 at 05:00 PM.
#19
Platinum Supporting Vendor
Installed the side rails today, next week is splitter and diffuser then body colored splash guards which are on order.
I did it by myself, used boxes and a spring clamp to hold the rockers in place until the screws were drilled in. Drilling is easy. Best if you can elevate the car, I used race ramps, 56 inch ones. Also need a 90 degree drill for the rear if only the front is elevated. The first one took about 50 minutes, the second about 30 minutes, I added some 3M double sided auto tape near the front and some silicone sealant where I saw any spaces under the car.
I did it by myself, used boxes and a spring clamp to hold the rockers in place until the screws were drilled in. Drilling is easy. Best if you can elevate the car, I used race ramps, 56 inch ones. Also need a 90 degree drill for the rear if only the front is elevated. The first one took about 50 minutes, the second about 30 minutes, I added some 3M double sided auto tape near the front and some silicone sealant where I saw any spaces under the car.