FS: New Product!! C7 Z06 Rear Quarter Panels Fits Z51/Z06
#1
Former Vendor
Thread Starter
New Product!! C7 Z06 Rear Quarter Panels Fits Z51/Z06
Just got done with these C7 Z06 wide body rear quarter panels.
These panels fit both the z51 models and the z06 models (coupe only) installation is pretty straight forward (bolt on) any experienced body shop should get them installed without any problems.
The panels are made with 2 layers of 3oz fiberglass mat with a siongle layer backing cloth and premium matrix and grey gel-coat surface. The panels do not come with any inserts.
These are listed @ $1299 shipped.
If you have any questions please feel free to contact us anytime. We currently have one in stock and ready to be shipped but normally take about 1-2 weeks to ship.
CF Kits & Performance
205 N Aspan Ave
Azusa CA 91702
626.629.6097
info@cfkits.com
These panels fit both the z51 models and the z06 models (coupe only) installation is pretty straight forward (bolt on) any experienced body shop should get them installed without any problems.
The panels are made with 2 layers of 3oz fiberglass mat with a siongle layer backing cloth and premium matrix and grey gel-coat surface. The panels do not come with any inserts.
These are listed @ $1299 shipped.
If you have any questions please feel free to contact us anytime. We currently have one in stock and ready to be shipped but normally take about 1-2 weeks to ship.
CF Kits & Performance
205 N Aspan Ave
Azusa CA 91702
626.629.6097
info@cfkits.com
#3
No need to change the rear upper and lower bumper panel. Any Pictures of actual installed on Z51 C7
#5
Le Mans Master
I was excited to read this... but we are missing critical info here.
A) "fits Z06 and Stingray without mods"? Z06 has the wider flared rockers and wider rear fascia mounting points than the Stingray, both of which interface with the fender. One fender fits them *both* without mods? I don't see how that's physically possible. Explanation or pics?
B) The Z06 already has wider fenders... why would you install these?
It is not explicitly stated, so I'll ask: Does the installation of these fenders on a Stingray allow installation of Z06-spec rear wheels and tires?
Eager for answers!
A) "fits Z06 and Stingray without mods"? Z06 has the wider flared rockers and wider rear fascia mounting points than the Stingray, both of which interface with the fender. One fender fits them *both* without mods? I don't see how that's physically possible. Explanation or pics?
B) The Z06 already has wider fenders... why would you install these?
It is not explicitly stated, so I'll ask: Does the installation of these fenders on a Stingray allow installation of Z06-spec rear wheels and tires?
Eager for answers!
Last edited by Kent1999; 10-20-2017 at 01:44 AM.
#8
Fits Z51 and Z06 bolt on? Doesn't make sense to me too.
This would be an interesting product to buy if no modification needed for Z51 stingray.
This would be an interesting product to buy if no modification needed for Z51 stingray.
Last edited by ZorenZ51; 10-20-2017 at 12:51 PM.
#9
Melting Slicks
Member Since: Sep 2016
Location: Northville Michigan
Posts: 3,074
Received 1,195 Likes
on
663 Posts
C7 of the Year - Unmodified Finalist 2021
So if I am looking at this correctly, the upper flare over the top of tire would only be flared and everything else including the lower area of the rear bumper that connects would not flare nor would the bottom rocker panel. So a mock up picture of the panel on a car would be appropriate as I don't see how the prototype shown would work or how it is suppose to look on actual car.
Examples of Wide Body Bolt on Kit Variations that other Vendors have Created for illustrative purposes to show that the OP that his product is lacking pieces to create a full curvature extending downward :
Examples of Wide Body Bolt on Kit Variations that other Vendors have Created for illustrative purposes to show that the OP that his product is lacking pieces to create a full curvature extending downward :
Last edited by KGrant; 10-24-2017 at 07:37 AM.
#10
do you hace a set of these for a z51 vert?
#14
Race Director
Look s pretty hot on a z51 coupe...
I don't understand why anyone would put on z06 or grand sport just yet...but the z51 coupe looks like a win win as long as wheel and tire packages needed would not compromise handling...
I'm sure the correct wheels and tire package can be found...
Looks great....
I don't understand why anyone would put on z06 or grand sport just yet...but the z51 coupe looks like a win win as long as wheel and tire packages needed would not compromise handling...
I'm sure the correct wheels and tire package can be found...
Looks great....
#16
Many inquiries or questions about the product but no specific clarification or response from OP.
#18
Melting Slicks
Member Since: Sep 2016
Location: Northville Michigan
Posts: 3,074
Received 1,195 Likes
on
663 Posts
C7 of the Year - Unmodified Finalist 2021
Those pictures were illustrated to show what other vendors have created and how they look on a car. It also was a point that the ONE PART that is being showed doesn't make sense without the lower pieces to create a continuous curve. Makes no sense to me what he/she posted by itself as a part.
#20
Those pictures were illustrated to show what other vendors have created and how they look on a car. It also was a point that the ONE PART that is being showed doesn't make sense without the lower pieces to create a continuous curve. Makes no sense to me what he/she posted by itself as a part.