FS: Performance Lower Shifter Boxes
#124
Supporting Vendor
Thread Starter
I've got some extra Z06 boxes that can go out on Monday or Tuesday with 5% or 20% Shifters or by themselves.
EMAIL or PM, First Come First Served
TMODCUSTOMS@GMAIL.COM
EMAIL or PM, First Come First Served
TMODCUSTOMS@GMAIL.COM
__________________
TMODCUSTOMS Specialty CNC Products
C5, C6 & C7
Performance Shifter Boxes
Upgraded Shifter Options
Zero-Slop Shifter Linkages
Don't replace your clutch without upgrading your linkage!
www.TMODCUSTOMS.com
info@tmodcustoms.com
TMODCUSTOMS Specialty CNC Products
C5, C6 & C7
Performance Shifter Boxes
Upgraded Shifter Options
Zero-Slop Shifter Linkages
Don't replace your clutch without upgrading your linkage!
www.TMODCUSTOMS.com
info@tmodcustoms.com
#126
Supporting Vendor
Thread Starter
Got a bunch more Z boxes in, ready to ship.
Also just a reminder to remove your rubber foot from the bottom of your old box and silicone it to the new box.
Black rubber foot is installed on the Z06 box, not on the front box.
Also just a reminder to remove your rubber foot from the bottom of your old box and silicone it to the new box.
Black rubber foot is installed on the Z06 box, not on the front box.
The following users liked this post:
Bigblue77 (12-29-2019)
#133
Supporting Vendor
Thread Starter
Got a ton of cores back this week, thanks everyone!! Minimal wait time for orders right now and I think they may stay consistently short going forward!
Some cores come in looking brand new, some look like they came out of a swamp. I spend a lot of time getting them back to 110%. Every box is cleaned / degreased, media blasted, checked for cracks or any other faults machined and re-threaded before they get assembled If they don't pass inspection they go in the trash.
All lubed up and ready for installation .
Some cores come in looking brand new, some look like they came out of a swamp. I spend a lot of time getting them back to 110%. Every box is cleaned / degreased, media blasted, checked for cracks or any other faults machined and re-threaded before they get assembled If they don't pass inspection they go in the trash.
All lubed up and ready for installation .
#135
Supporting Vendor
Thread Starter
I've got boxes with Delrin and Polyurethane torque tube bushings in stock. Shifters are almost in stock as well, lead time is getting pretty short!
Lots of shifters out in the wild now, from easy daily drivers to fully equipped track cars.
Lots of shifters out in the wild now, from easy daily drivers to fully equipped track cars.
#137
Supporting Vendor
Thread Starter
I'm looking for some pics, if anyone running any of my parts would like their car to be featured on my website post your pics or email them to me and I'll add them to the new website.