FS: Savini Monoform Race Wheels----Special Pricing
#1
Former Vendor
Thread Starter
Member Since: Mar 2003
Location: Tampa FL
Posts: 18,673
Received 393 Likes
on
286 Posts
St. Jude Donor '07-'08-'09-'10-'11-'12'-'13-'14-'15
Savini Monoform Race Wheels----Special Pricing
Edgyvette special pricing on new Savini lightweight Monoform race wheels. Email for best prices Sales@Edgyvette.com
SV-F 1
Sizes:
19×8.5 | 19×9 | 19×9.5 | 19×11
20×8.5 | 20×9 | 20×10 | 20×11 | 20×12
22×9 | 22×9.5 | 22×10 | 22×11WHEEL FINISHES
GLOSS BLACK
DOUBLE DARK TINT W/ GLOSS BLACK
BRUSHED SILVER
SV-F 2
Sizes:
20×8.5 | 20×9 | 20×10 | 20×11 | 20×12
22×9 | 22×11 | 22×12WHEEL FINISHES
WHEEL FINISHES
GLOSS GRAPHITE
MATTE BRONZE
DOUBLE DARK TINT W/ GLOSS BLACK
SV-F3
PRECISION
ENGINEERED
Stronger, lighter wheels for optimal performance and looks!FEATURES
LIGHTWEIGHT & TRACK READY
Performance ProvenTWO-PIECE CENTER CAP DETAIL
Another level of customizationMONO FORM TECHNOLOGY
Precision Engineered
MONO FORM TECHNOLOGY
STEP 1
The process starts using a casting specially made for Flow Forming Technology that’s placed onto a steel rim that’s then prepped for molding.
STEP 2
Extensive heat and pressure is applied using three individual rollers to shape the aluminum to the wheel mold.
STEP 3
The individually shaped rollers fortify the barrel to the specified width and density, allowing for a stronger wheel using less material.
STEP 4
The molecular compound of the aluminum significantly hardens in a streamline direction, resulting in a tolerant and considerably lighter wheel.
SV-F 1
Sizes:
19×8.5 | 19×9 | 19×9.5 | 19×11
20×8.5 | 20×9 | 20×10 | 20×11 | 20×12
22×9 | 22×9.5 | 22×10 | 22×11WHEEL FINISHES
GLOSS BLACK
DOUBLE DARK TINT W/ GLOSS BLACK
BRUSHED SILVER
SV-F 2
Sizes:
20×8.5 | 20×9 | 20×10 | 20×11 | 20×12
22×9 | 22×11 | 22×12WHEEL FINISHES
WHEEL FINISHES
GLOSS GRAPHITE
MATTE BRONZE
DOUBLE DARK TINT W/ GLOSS BLACK
SV-F3
PRECISION
ENGINEERED
Stronger, lighter wheels for optimal performance and looks!FEATURES
LIGHTWEIGHT & TRACK READY
Performance ProvenTWO-PIECE CENTER CAP DETAIL
Another level of customizationMONO FORM TECHNOLOGY
Precision Engineered
MONO FORM TECHNOLOGY
STEP 1
The process starts using a casting specially made for Flow Forming Technology that’s placed onto a steel rim that’s then prepped for molding.
STEP 2
Extensive heat and pressure is applied using three individual rollers to shape the aluminum to the wheel mold.
STEP 3
The individually shaped rollers fortify the barrel to the specified width and density, allowing for a stronger wheel using less material.
STEP 4
The molecular compound of the aluminum significantly hardens in a streamline direction, resulting in a tolerant and considerably lighter wheel.
Last edited by Cajun @ Edgyvette; 07-11-2018 at 07:48 AM.