SOLD! SOLD! SOLD! Thanks for looking!

Pistons and rods including ARP 2000 rod bolts
10/28/18 - PRICE DROP!! $600.00 SHIPPED!!

I’m selling my full set of used Vengeance Racing forged LT1 drop in pistons and stock rods, complete. The reason they are being sold is I am rebuilding the motor due to some minor damage and decided to strengthen the rotating assembly and drop my compression ratio as I was already at 900 wheel HP. This setup is rated around 900 wheel.

The minor damage was due to these pistons hitting the piston oil squitter's and breaking off a couple of the nozzles. One of them bounced around and put some cosmetic marks on the bottoms of a few of the pistons but no damage to any of the contact surfaces so performance is unaffected. I have pictures below to show them including the one that got the brunt of the marks on it. Again, they are cosmetic and the pistons are still good to use. Please note: you WILL need to slightly massage your piston oil squinters so they do not contact the pistons once installed! Obviously you will need to get a set of rings as the rings that were on these cannot be reused. Mileage on these pistons is approximately 3500 miles.

Pistons: 11.7:1 compression ratio, matched bobweight so they are drop-in ready. Additional details available here:

https://vengeanceracing.net/2014-c7-corvette/engines/pistons-rings/vengeance-racing-forged-drop-in-lt1-pistons.html

Rods: stock rods from my wet sump LT1. All in great shape INCLUDES ARP 2000 ROD BOLTS!

I also have the crank available if you need it as well.

Again, Pistons and rods including ARP 2000 rod bolts

PRICE DROP 10/28/18 - $600 SHIPPED!!















Ant

Pretty good deal here. With the rods it’s truky a drop in situation! Just put rings on them and go.

Bump! $775 shipped!

Bump! $750 shipped! Not going any lower than this!!

Bump! Lots of inquiries, but still available! Get these before they are gone!

Lionel, called and left you a VM the other day.

Hey Ant sorry bud I was out of the country call me tomorrow let’s chat

Bump!!

PRICE DROPPED TO $700 shipped!!!!

Ant

Do you happen to know the bore size? In the middle of a build right now after catastrophic failure and my tuner said it needed to be a specific bore size.

these are for stock bore of 4.065”. The rings to get would be the 4067gfx set from Wiseco.

Bump! Due to unexpectedly losing my job yesterday, I really need these gone ASAP. Please contact me if you are interested. Thanks all.

Damn that sucks Ant. Someone buy these.

Bump! Will do $650 shipped! Need these gone asap!