ECS Blower/Meth & Texas speed headers 10.1@140 Mph !
10-24-2015, 12:41 AM
#1
Drifting
Thread Starter
ECS Blower/Meth & Texas speed headers 10.1@140 Mph !
Picked up my car from Ecs last week with the 3 mod set up and it made
701 rwhp and 620 rwtq through an 8 speed auto
Went to the track tonight for a few passes. I was running mt drag radials
And it ran real well. This thing pulls hard !! But still need to play with shift points so I'm sure it's got more in it
Here is the slip
701 rwhp and 620 rwtq through an 8 speed auto
Went to the track tonight for a few passes. I was running mt drag radials
And it ran real well. This thing pulls hard !! But still need to play with shift points so I'm sure it's got more in it
Here is the slip
10-24-2015, 08:44 AM
#6
Drifting
Thread Starter
I paddle shifted this run If I didn't it would tap the rev limiter
10-24-2015, 08:55 AM
#8
Premium Supporting Vendor
Member Since: Oct 2004
Location: Providing the most proven supercharger kits for your C5/6/7 609-752-0321
Posts: 23,315
Received 1,085 Likes
on
656 Posts
Nice job Brent, I would expect nothing less from a seasoned pro at the track. 
Between early shifts and lack of full control of the trans tuning yet, I think this car has a 9.7 in it once that gets fully sorted out.
Congrats!
Between early shifts and lack of full control of the trans tuning yet, I think this car has a 9.7 in it once that gets fully sorted out.
Congrats!
10-24-2015, 09:38 AM
#10
Safety Car
10-24-2015, 11:37 AM
#12
Team Owner
Member Since: Jan 2007
Location: cookeville tennessee
Posts: 28,846
Received 1,762 Likes
on
1,529 Posts
Had to be pulling like a F/train on the top end for that 60ft time with the MPH & a stock rear end gear. Dam get that 60 ft down some & the car will be in close to the mid 9,s with no problems..It would be nice to get a new set of gears for these cars. What tire set up was on the car front & rear.. By the way some nice number on the rollers also... Robert
10-24-2015, 04:00 PM
#14
Drifting
Thread Starter
Had to be pulling like a F/train on the top end for that 60ft time with the MPH & a stock rear end gear. Dam get that 60 ft down some & the car will be in close to the mid 9,s with no problems..It would be nice to get a new set of gears for these cars. What tire set up was on the car front & rear.. By the way some nice number on the rollers also... Robert
Black c6 zo6 replicas but with c5 zo6 offsets
10-24-2015, 05:41 PM
#16
Instructor
Very awesome resluts!
Which Mickey Thompson tires was it? I would think the P315/30R18 ET Street Radial would be kinda short at 25.5". I have the same wheels/tires on my C5 z06 and was considering moving them to the C7 but thought they would be too short.
Which Mickey Thompson tires was it? I would think the P315/30R18 ET Street Radial would be kinda short at 25.5". I have the same wheels/tires on my C5 z06 and was considering moving them to the C7 but thought they would be too short.
10-24-2015, 06:12 PM
#17
Drifting
Thread Starter
1.57 60ft tells me it must've liked it
Put them on your c7
Last edited by brent eb02; 10-24-2015 at 06:22 PM.
The following users liked this post:
DoubleDown (10-24-2015)
10-24-2015, 06:47 PM
#19
Team Owner
Member Since: Jan 2007
Location: cookeville tennessee
Posts: 28,846
Received 1,762 Likes
on
1,529 Posts
10-24-2015, 11:15 PM
#20
Drifting
Thread Starter