700hp NA Katech 427 LT1 Grand Sport track car
The following users liked this post:
timmyZ06 (01-14-2018)
#45
Race Director
Phenominal video capturing the build progression from start to finish!!
May I ask (since I don't know), what generally causes a gap between HP and Torque, such as for this build 71 lb ft of torque (627/556). What is necessary to close that gap and increase the torque?
What is more important at this level of performance, HP or TQ?
Thanks in advance!!
May I ask (since I don't know), what generally causes a gap between HP and Torque, such as for this build 71 lb ft of torque (627/556). What is necessary to close that gap and increase the torque?
What is more important at this level of performance, HP or TQ?
Thanks in advance!!
Last edited by WICKEDFRC; 01-14-2018 at 07:14 PM.
#47
Premium Supporting Vendor
Thread Starter
Phenominal video capturing the build progression from start to finish!!
May I ask (since I don't know), what generally causes a gap between HP and Torque, such as for this build 71 lb ft of torque (627/556). What is necessary to close that gap and increase the torque?
What is more important at this level of performance, HP or TQ?
Thanks in advance!!
May I ask (since I don't know), what generally causes a gap between HP and Torque, such as for this build 71 lb ft of torque (627/556). What is necessary to close that gap and increase the torque?
What is more important at this level of performance, HP or TQ?
Thanks in advance!!
#48
Burning Brakes
LOVE this package. Very interested in getting it. I had ‘16 Z06, how does this package compare to a stock Z06? Pretty similar in terms of power and delivery?
#49
Only question I have is what us the tech looking at with the hand held microscope in the crank case before the timing cover is installed.
Last edited by bc928; 07-13-2018 at 01:08 AM.
#50
Premium Supporting Vendor
Thread Starter
427 LT1 manual
3 C7 Z06 manual baselines
Last edited by Katech_Zach; 07-13-2018 at 08:25 AM.
#51
Premium Supporting Vendor
Thread Starter
#52
Burning Brakes
#54
Racer
Cost for the Katech 700 HP upgrade
My C7 Z put 710 HP and 748 TQ to the wheels, but I'm seriously thinking about getting a Admiral blue Grand Sport M7 for a track car, then upgrade the motor to this package! Any idea of the cost involved?
#55
Le Mans Master
Member Since: Aug 2001
Location: Savannah GA
Posts: 6,070
Received 280 Likes
on
213 Posts
Cruise-In IV Veteran
Slick build so congrats on that. Curios to me it looks like the knock sensor is in the wrong spot on the driver side first pic? I thought it sits up under a metal heat shield up near the top right? Maybe the LT1's are different. Also with all that money in the build going for a fast revving N/A why oh why didn't they remove all that rotating mass from the VVT assembly using your Billet VVT delete? That sucker is 10lbs or close to it vs a 1lb ish for the LS3 replacement sprocket. That would have made it topped off for sure less stress on the valvetrain (chain, etc.) and sure looked nice. Just my thoughts I guess the buck has to stop somewhere unfortunately I was incapable of doing so on my build. So kudos to saving money :-). It's nice to see vid's making it look so easy and quick to pull these motors out lol.