Has this controller been tried?
#1
Racer
Thread Starter
Has this controller been tried?
No A-Pillars for gauge mounting,Autometer recommended this.....This is cool....can be programmed to show both Boost and Fuel Pressure in DIC....along with a lot of other stuff.....Anybody tried it?...Check out the short video...it shows fuel pressure on vid front page.....A long list of good stuff
http://www.autometer.com/dashcontrol...ette-2014.html
http://www.autometer.com/dashcontrol...ette-2014.html
#2
Le Mans Master
I tried it, very disappointed and sold it shortly after trying it. It is actually from DashLogic, and Palmer Performance.
FYI: It only works on '14 & '15 vettes I believe. Never updated for the later years.
FYI: It only works on '14 & '15 vettes I believe. Never updated for the later years.
#3
Racer
Thread Starter
Thanks...I've got a 2015 and the only things I want to work is to show the Boost and Fuel Pressure.....Did those work for you?...or did you even try that?
#4
I've got it on my ECS supercharged vette. I've got a 15 and it works great. I monitor boost and Iat2. You can also install a wideband. There are multiple pages and fuel pressure is able to be monitored. Easy set up too.
#5
Racer
Thread Starter
Thanks.....I also read that a lot of things can be set so that they display on the HUD,it would be perfect if I could have the boost shown on that....have you tried to set anything for the HUD?....and thanks again,it sounds like a positive...I've got the A&A SC on mine but everything should work
Last edited by Dave502; 08-22-2017 at 07:16 AM.
#7
Racer
Thread Starter
Thanks again,I'm ordering a suction cup mount and A Vacuum/Boost gauge and mount it up high next to A pillar until something else comes along...