Can't seem to log boost with torque app?
05-16-2018, 02:03 PM
#1
Melting Slicks
Thread Starter
Can't seem to log boost with torque app?
Which one do i want to log to see boost? All i seem to get is negative numbers even at what should be full boost.
05-21-2018, 06:01 PM
#2
Pro
Did you download the Manufactures PID's? That's what I did and was able to select available PID's and monitor them. Also used Torque Pro vs. Torque lite if that makes a difference. Hope this helps.
05-21-2018, 06:22 PM
#3
Melting Slicks
Thread Starter
05-21-2018, 06:35 PM
#4
Pro
05-22-2018, 03:12 PM
#5
Advanced
This might be a silly question, but do you have a ZO6? Or did you upgrade your LT1 to a 3 bar map sensor? I think you will need a 3 bar map for the PID to display boost.
05-22-2018, 04:11 PM
#6
Melting Slicks
Thread Starter
Its a z06, i just need to do a solid higheay pull or get it on track to see the boost. Hard to go full throttle around these parts besides 2am.
05-22-2018, 05:10 PM
#7
Pro
05-22-2018, 05:54 PM
#8
Melting Slicks
Thread Starter
In for a "how to".