C7 Tech/Performance Corvette Technical Info, Internal Engine, External Engine, Tech Topics, Basic Tech, Maintenance, How to Remove & Replace
Sponsored by:
Sponsored by:

How to set info display in DIC ?

Thread Tools
 
Search this Thread
 
Old 06-05-2018, 11:41 AM
  #1  
NTMD8R
Melting Slicks
Thread Starter
 
NTMD8R's Avatar
 
Member Since: Sep 1999
Location: Richmond, BC, Canada
Posts: 2,305
Received 83 Likes on 68 Posts

Default How to set info display in DIC ?

When I was at Spring Mountain in March, C7Z06 A8,
they had an array of vehicle information showing on the DIC...
Oil temp, Oil Press, Water Temp, etc.

It was all showing in a list on the right side all at once.

I (stupid) forgot to ask how they got this to display.

So, how do I get mine to display all this info at once as they did ?
I can't find anything in the manual (again stupid me ??)
Old 06-05-2018, 02:55 PM
  #2  
DomLS3
Pro
 
DomLS3's Avatar
 
Member Since: Aug 2012
Location: Memphis Tennessee
Posts: 637
Likes: 0
Received 186 Likes on 116 Posts

Default

Originally Posted by NTMD8R
When I was at Spring Mountain in March, C7Z06 A8,
they had an array of vehicle information showing on the DIC...
Oil temp, Oil Press, Water Temp, etc.

It was all showing in a list on the right side all at once.

I (stupid) forgot to ask how they got this to display.

So, how do I get mine to display all this info at once as they did ?
I can't find anything in the manual (again stupid me ??)
Mine shows up in performance mode on the DIC but you can also set which mode shows which information.
Old 06-05-2018, 04:00 PM
  #3  
RonC7
Melting Slicks
 
RonC7's Avatar
 
Member Since: Dec 2012
Location: St. Louis Metro East IL
Posts: 2,996
Received 1,298 Likes on 859 Posts

Default

You are looking for TOURING display, INFO.

Two very handy threads up in the stickys:

https://www.corvetteforum.com/forums...chy-chart.html

https://www.corvetteforum.com/forums...-selector.html

and a bonus!

https://www.corvetteforum.com/forums...harts-pdf.html

Have fun exploring!

Ron

Last edited by RonC7; 06-05-2018 at 04:01 PM. Reason: .
Old 06-05-2018, 04:03 PM
  #4  
arturox2
Burning Brakes
Support Corvetteforum!
 
arturox2's Avatar
 
Member Since: Mar 2014
Location: Loudoun County VA
Posts: 838
Received 70 Likes on 61 Posts
Default

I believe that display is in the Tour Mode, information display or performance display.
Old 06-05-2018, 07:43 PM
  #5  
NTMD8R
Melting Slicks
Thread Starter
 
NTMD8R's Avatar
 
Member Since: Sep 1999
Location: Richmond, BC, Canada
Posts: 2,305
Received 83 Likes on 68 Posts

Default

I guess I am not explaining myself adequately.
I can easily move between all the different modes and displays using the
4 arrow keys, etc. And I think you for the links to the information on how to do this.

But at Spring Mountain, they had at least 4 items displayed all at the same time.
This was so their techs/mechanics didn't have to page through things to see if the car
needed attention in any way.

The 4 items were displayed about half of the screen in height, and a bit more to the right of center.

We were running in Track, Sport1 mode.

I am wondering how they did this.
I guess I could send an email, but my experience has been they don't reply
to my emails.
Old 06-05-2018, 08:52 PM
  #6  
RonC7
Melting Slicks
 
RonC7's Avatar
 
Member Since: Dec 2012
Location: St. Louis Metro East IL
Posts: 2,996
Received 1,298 Likes on 859 Posts

Default

As I said above TOUR display mode, INFO submode. You need to unlink the display from driving mode and set to TOUR using the arrow keys, left menu, select SETTINGS, scroll down to DISPLAY, arrow right, select TOUR. Then arrow to left menu, select INFO, scroll down to display that you want.

Personally, I like the Track / Perf display so I can have 4 gauges (oil press, oil temp, volts, trans temp). I also like Track mode in the HUD. I don't drive in Track mode on the street - typically in TOUR due to rough roads. Also steering set to Track, Perf exhaust OFF / fuse pulled.

Try it - you'll like it!

Ron

Last edited by RonC7; 06-05-2018 at 08:56 PM. Reason: .
The following users liked this post:
NTMD8R (06-05-2018)
Old 06-06-2018, 06:53 AM
  #7  
rrsperry
Safety Car
 
rrsperry's Avatar
 
Member Since: Sep 2015
Posts: 4,786
Received 1,412 Likes on 737 Posts
Default

Not to be too pedantic, but did you read the manual?

Yep, it's tour mode on the d.i. screen, in the info submenu.

left click settings, select down to display (center click to ok)
select display, ok
select Tour, ok
click left,left, than select info, click ok.

(of course that is from memory, and I could be wrong, that's about how the process works.)
Old 06-06-2018, 11:33 AM
  #8  
NTMD8R
Melting Slicks
Thread Starter
 
NTMD8R's Avatar
 
Member Since: Sep 1999
Location: Richmond, BC, Canada
Posts: 2,305
Received 83 Likes on 68 Posts

Default

rrsperry,
yes I did read the manual (and I have done so many times).
But nowhere could I find how to make all these items display.
Pages 115 and on tell how to change them, and describes what each
display tells, but nothing to actually tell how to show a whole bunch at once.

Thanks to RonC7, it is now quite clear to me.

1st... there are various display MODES.
2nd... to show what I want it must be in TOUR display mode
3rd... now if I select INFO, it will give me other choices.
4th... I choose Track/Perf and it shows the 5 items I want.

Nowhere in the manual does it go to anything like this detail.

Get notified of new replies

To How to set info display in DIC ?




Quick Reply: How to set info display in DIC ?



All times are GMT -4. The time now is 07:35 PM.