How much outside tread left on these Cup 2’s?
#1
Instructor
Thread Starter
How much outside tread left on these Cup 2’s?
3 track weekends (6 days * four 20-min sessions/day), and surprisingly no delamination...perhaps I was lucky with this batch of cup2’s.
My question: looking at the pics, how much outside tread is remaining on the fronts? The unique cup2 tread indicator (the small rectangular divots inside about every 7 grooves on the outside of the tire) is still visible if you look closely, but I’m not sure if that’s the best way to look at tracked cup2’s.
Thanks in advance
My question: looking at the pics, how much outside tread is remaining on the fronts? The unique cup2 tread indicator (the small rectangular divots inside about every 7 grooves on the outside of the tire) is still visible if you look closely, but I’m not sure if that’s the best way to look at tracked cup2’s.
Thanks in advance
Last edited by archfarseer; 11-26-2018 at 04:02 PM.
#2
3 track weekends (6 days * four 20-min sessions/day), and surprisingly no delamination...perhaps I was lucky with this batch of cup2’s.
My question: looking at the pics, how much outside tread is remaining on the fronts? The unique cup2 tread indicator (the small rectangular divots inside about every 7 grooves on the outside of the tire) is still visible if you look closely, but I’m not sure if that’s the best way to look at tracked cup2’s.
Thanks in advance
My question: looking at the pics, how much outside tread is remaining on the fronts? The unique cup2 tread indicator (the small rectangular divots inside about every 7 grooves on the outside of the tire) is still visible if you look closely, but I’m not sure if that’s the best way to look at tracked cup2’s.
Thanks in advance
Also how much camber are you running
#3
Instructor
Thread Starter
I'm running -2.2 front and -1.7 rear (driving to/from the track). Much thanks for the help!
#4
Premium Supporting Vendor
Stock control arm bushings?