C7Z 700+whp Package: HPA Cam package w/ Extras, On Sale!
#1
Former Vendor
Thread Starter
C7Z 700+whp Package: HPA Cam package w/ Extras, On Sale!
Awesome numbers being put down with our HPA Cam Package. The IW Pulley and ALKY meth. injection added on take this cam package even further. Over 720whp and even more torque! Cam used here is our LT2.5 Cam.
This setup cost: $7,490
Includes:
- AFE Intake
- Corsa X- Pipe
- IW Lower Pulley
- HPA Camshaft package
- HPA Stage 1-3 custom camshaft
-+32-38% fuel lobe
-HPA AFM delete
-Comp Phaser limiter kit
-Dual .660" Platinum valve spring kit w/lightweight titanium retainers
-7.850 Hardened 5/16 .080 pushrods
-LS7 lifter set
-LS7 lifter buckets
-LT4 headbolt set
-Remove & Reinstall cylinder heads
-GM LT4 headgaskets
-NGK LTR7IX-11 Spark Plugs
-GM front crank seal
-Water pump gaskets
-Synthetic oil change
-Misc fliuds and solvents
-Professional installation
-Custom Tuning w/printouts
Our HPA Z06 Cam Package (LT2.5), without the add-ons, put down on average 630-640whp. Great cost to gain ratio for the pulley and methanol.
Standard C7 Z06 HPA Cam Package (as listed above): $4,200
Looking for power, but less invasive?
Bolt-On Package $3,499
This setup cost: $7,490
Includes:
- AFE Intake
- Corsa X- Pipe
- IW Lower Pulley
- HPA Camshaft package
- HPA Stage 1-3 custom camshaft
-+32-38% fuel lobe
-HPA AFM delete
-Comp Phaser limiter kit
-Dual .660" Platinum valve spring kit w/lightweight titanium retainers
-7.850 Hardened 5/16 .080 pushrods
-LS7 lifter set
-LS7 lifter buckets
-LT4 headbolt set
-Remove & Reinstall cylinder heads
-GM LT4 headgaskets
-NGK LTR7IX-11 Spark Plugs
-GM front crank seal
-Water pump gaskets
-Synthetic oil change
-Misc fliuds and solvents
-Professional installation
-Custom Tuning w/printouts
Our HPA Z06 Cam Package (LT2.5), without the add-ons, put down on average 630-640whp. Great cost to gain ratio for the pulley and methanol.
Standard C7 Z06 HPA Cam Package (as listed above): $4,200
Looking for power, but less invasive?
Bolt-On Package $3,499