12K Mile 2017 GS (Excessive oil Buildup)
#1
12K Mile 2017 GS (Excessive oil Buildup)
Hoping someone could provide a little clarity on whether or not this is normal? Purchased the car 6 months ago with 9k miles. Driven it hard since but nothing too stupid.
I had my intake manifold off and noticed this buildup on the throttle body , intake manifold and cylinder head intakes. Haven't looked at the valves but I'd imagine they look pretty similar? I was just about to install a blower on this car with 6 months of warranty left.
Appreciate any feedback ...
I had my intake manifold off and noticed this buildup on the throttle body , intake manifold and cylinder head intakes. Haven't looked at the valves but I'd imagine they look pretty similar? I was just about to install a blower on this car with 6 months of warranty left.
Appreciate any feedback ...
Last edited by Stingray Dreams; 07-27-2021 at 12:25 PM.
#2
Instructor
Member Since: Jan 2020
Location: Beaumont, Southeast Texas
Posts: 143
Likes: 0
Received 11 Likes
on
9 Posts
I recently took my engine down for a cam change and to install forged internals. My engine has 12.5K miles on it. I saw similar oil fouling in the heads and on the valves. I cleaned it all up and put on new valve springs. I put it all together and put an LT4 blower on it. A Mighty Mouse catch can will reduce that significantly if you want to look in to it.
The following 2 users liked this post by Pjmc15Z51:
David@MMS (08-02-2021),
Stingray Dreams (08-03-2021)
The following users liked this post:
Avanti (08-03-2021)
#4
Tech Contributor
Member Since: Oct 1999
Location: Charlotte, NC (formerly Endicott, NY)
Posts: 40,089
Received 8,928 Likes
on
5,333 Posts
#5
Supporting Vendor
go ahead with the blower but add meth and a solid catch can solution
__________________
Solutions for the common gearhead #made in USA
mightymousesolutions.com
facebok.com/mightymousesolutions
#mmsolutions
Six time NMCA True Street Champions
Home of the first Twin Turbo C7Z 7.81 @ 176
3470# Stock bottom end and heads Corvette Stock Bottom End Record Holder
Solutions for the common gearhead #made in USA
mightymousesolutions.com
facebok.com/mightymousesolutions
#mmsolutions
Six time NMCA True Street Champions
Home of the first Twin Turbo C7Z 7.81 @ 176
3470# Stock bottom end and heads Corvette Stock Bottom End Record Holder
The following users liked this post:
Stingray Dreams (08-03-2021)