New RPI Designs C7 Corvette GM Splash Guards, Unpainted, Painted & Hydro Carbon Fiber
#1
Platinum Supporting Vendor
Thread Starter
New RPI Designs C7 Corvette GM Splash Guards, Unpainted, Painted & Hydro Carbon Fiber
2014 C7 Corvette Stingray Splash Guards Kit
If you are looking for a very quick and easy way to protect your new C7 Corvette Stingray then check out these molded splash guards. These splash guards are made of ABS plastic and just "snap" into place. To install these C7 Corvette splash guards you will need to remove your existing wheel well guards. These guards are held in with 1 screw that sits at the bottom of the car. Remove that screw and simply pry them away with your hands. Once you have removed your OEM fender guards, take these splash guards, snap them into place and tighten the screw.
Installation is very easy and can be done in your garage with a ratchet and your hands.
C7 Corvette Splash Guards Kit - Black 4pc Kit
Item # C7-GM505 Price $169.95 Use coupon code RPIDON5 and receive 5% off the listed price!
Website link : http://www.rpidesigns.com/shop/item.aspx?itemid=3274
C7 Corvette Painted Body Color & Hydro Carbon Fiber Splash Guards Kit
Item # C7-GM506 Price $209.95 Use coupon code RPIDON5 and recieve 5% off the listed price!
Website Link : http://www.rpidesigns.com/shop/item.aspx?itemid=3275
Picture of C7 Corvette Splash Guards Kit - Black 4pc Kit
Picture of C7 Corvette Painted Body Color Splash Guards Kit
Picture of Inside Fender well of Painted Splash Guards
Width of Front Splash Guard
Width of Rear splash guards
If you are looking for a very quick and easy way to protect your new C7 Corvette Stingray then check out these molded splash guards. These splash guards are made of ABS plastic and just "snap" into place. To install these C7 Corvette splash guards you will need to remove your existing wheel well guards. These guards are held in with 1 screw that sits at the bottom of the car. Remove that screw and simply pry them away with your hands. Once you have removed your OEM fender guards, take these splash guards, snap them into place and tighten the screw.
Installation is very easy and can be done in your garage with a ratchet and your hands.
C7 Corvette Splash Guards Kit - Black 4pc Kit
Item # C7-GM505 Price $169.95 Use coupon code RPIDON5 and receive 5% off the listed price!
Website link : http://www.rpidesigns.com/shop/item.aspx?itemid=3274
C7 Corvette Painted Body Color & Hydro Carbon Fiber Splash Guards Kit
Item # C7-GM506 Price $209.95 Use coupon code RPIDON5 and recieve 5% off the listed price!
Website Link : http://www.rpidesigns.com/shop/item.aspx?itemid=3275
Picture of C7 Corvette Splash Guards Kit - Black 4pc Kit
Picture of C7 Corvette Painted Body Color Splash Guards Kit
Picture of Inside Fender well of Painted Splash Guards
Width of Front Splash Guard
Width of Rear splash guards
Last edited by RPIDON; 12-30-2014 at 02:37 PM.
#3
Platinum Supporting Vendor
Thread Starter
#5
Platinum Supporting Vendor
Thread Starter
#7
Platinum Supporting Vendor
Thread Starter
#9
Platinum Supporting Vendor
Thread Starter
#10
Have some parts ordered from you and was wondering do these splash guards offer more protection than the GM guards thus the 40.00 difference in price? Love the quality items you provide for C7 and will buy more when extra money is laying around lol.
#11
Team Owner
Member Since: Oct 2013
Location: Kansas City, Missouri
Posts: 25,362
Received 7,752 Likes
on
4,181 Posts
CORVETTE TODAY Host
St. Jude Donor'15
Any pictures of these in Hydro Carbon Fiber?
#12
Platinum Supporting Vendor
#13
CF "Young" Senior Member
Happen to have any photos of the guards painted in Carbon Flash? My build's going to be NRB w/ the carbon flash trim option, figure I'd carry that onto parts like this.
#14
Platinum Supporting Vendor
I am sorry but we do not have any of these installed in Carbon Flash. Your color combo though...
__________________
RPI DESIGNS, LLC. - C5/C6/C7 Corvette Parts
4000+ C5/C6/C7 Parts & accessories - Forum members get 10% off with SS2007 coupon at checkout
Like us on www.facebook.com/rpidesigns and you might win $100.
Our brand new C7 Corvette Z06 Style Side Skirts come painted in Carbon Flash Metallic, see them here!
email: rpi.designs.customerservice@gmail.com Web: www.rpidesigns.com
RPI DESIGNS, LLC. - C5/C6/C7 Corvette Parts
4000+ C5/C6/C7 Parts & accessories - Forum members get 10% off with SS2007 coupon at checkout
Like us on www.facebook.com/rpidesigns and you might win $100.
Our brand new C7 Corvette Z06 Style Side Skirts come painted in Carbon Flash Metallic, see them here!
email: rpi.designs.customerservice@gmail.com Web: www.rpidesigns.com
#15
Melting Slicks<br><img src="/forums/images/ranks/3k-4k.gif" border="0">
Is carbon flash a paint option? Didn't see it on order page.
Never mind...scroll bar is your friend!
Never mind...scroll bar is your friend!
#16
Platinum Supporting Vendor
#17
These look good. I'm thinking about ordering them in carbon flash. A few questions though ...
1) Is the carbon flash pretty much the exact same color as the exterior vents of the car?
2) Are the dimensions of these splash guards the same as GM's official aftermarket ones? And I see you have the width (which is helpful), but how far down below the rocker panels do they go?
1) Is the carbon flash pretty much the exact same color as the exterior vents of the car?
2) Are the dimensions of these splash guards the same as GM's official aftermarket ones? And I see you have the width (which is helpful), but how far down below the rocker panels do they go?
2014 C7 Corvette Stingray Splash Guards Kit
If you are looking for a very quick and easy way to protect your new C7 Corvette Stingray then check out these molded splash guards. These splash guards are made of ABS plastic and just "snap" into place. To install these C7 Corvette splash guards you will need to remove your existing wheel well guards. These guards are held in with 1 screw that sits at the bottom of the car. Remove that screw and simply pry them away with your hands. Once you have removed your OEM fender guards, take these splash guards, snap them into place and tighten the screw.
Installation is very easy and can be done in your garage with a ratchet and your hands.
C7 Corvette Splash Guards Kit - Black 4pc Kit
Item # C7-GM505 Price $169.95 Use coupon code RPIDON and receive 10% off the listed price!
Website link : http://www.rpidesigns.com/shop/item.aspx?itemid=3274
C7 Corvette Painted Body Color & Hydro Carbon Fiber Splash Guards Kit
Item # C7-GM506 Price $209.95 Use coupon code RPI Don and recive 10% off the listed price!
Website Link : http://www.rpidesigns.com/shop/item.aspx?itemid=3275
Picture of C7 Corvette Splash Guards Kit - Black 4pc Kit
Picture of C7 Corvette Painted Body Color Splash Guards Kit
Picture of Inside Fender well of Painted Splash Guards
Width of Front Splash Guard
Width of Rear splash guards
If you are looking for a very quick and easy way to protect your new C7 Corvette Stingray then check out these molded splash guards. These splash guards are made of ABS plastic and just "snap" into place. To install these C7 Corvette splash guards you will need to remove your existing wheel well guards. These guards are held in with 1 screw that sits at the bottom of the car. Remove that screw and simply pry them away with your hands. Once you have removed your OEM fender guards, take these splash guards, snap them into place and tighten the screw.
Installation is very easy and can be done in your garage with a ratchet and your hands.
C7 Corvette Splash Guards Kit - Black 4pc Kit
Item # C7-GM505 Price $169.95 Use coupon code RPIDON and receive 10% off the listed price!
Website link : http://www.rpidesigns.com/shop/item.aspx?itemid=3274
C7 Corvette Painted Body Color & Hydro Carbon Fiber Splash Guards Kit
Item # C7-GM506 Price $209.95 Use coupon code RPI Don and recive 10% off the listed price!
Website Link : http://www.rpidesigns.com/shop/item.aspx?itemid=3275
Picture of C7 Corvette Splash Guards Kit - Black 4pc Kit
Picture of C7 Corvette Painted Body Color Splash Guards Kit
Picture of Inside Fender well of Painted Splash Guards
Width of Front Splash Guard
Width of Rear splash guards
#18
Platinum Supporting Vendor
Thread Starter
These look good. I'm thinking about ordering them in carbon flash. A few questions though ...
1) Is the carbon flash pretty much the exact same color as the exterior vents of the car?
2) Are the dimensions of these splash guards the same as GM's official aftermarket ones? And I see you have the width (which is helpful), but how far down below the rocker panels do they go?
1) Is the carbon flash pretty much the exact same color as the exterior vents of the car?
2) Are the dimensions of these splash guards the same as GM's official aftermarket ones? And I see you have the width (which is helpful), but how far down below the rocker panels do they go?
#19
Don, on the painted splash guards where is the color break back to ABS black? Picture?
Also, is there a .pdf with instructions for the Stage II Side Skirts? I'd like to see where the holes would be drilled.
Bill
Also, is there a .pdf with instructions for the Stage II Side Skirts? I'd like to see where the holes would be drilled.
Bill
Last edited by MoabC7; 03-06-2014 at 12:32 AM. Reason: Added question.
#20