New From RPI Designs!! C7 Corvette Stingray STO N SHO Front License Plate Bracket
#1
Platinum Supporting Vendor
Thread Starter
New From RPI Designs!! C7 Corvette Stingray STO N SHO Front License Plate Bracket
C7 Corvette Removable License Plate Bracket STO-N-SHO
Item #:
C7-STO
Website Link:
https://www.rpidesigns.com/shop/item...ket-sto-n-sho/
The C7 Corvette Removable - STO N SHO™ License Plate Holder
is a custom fit two pieces detachable front license plate bracket mounting system consisting of a front license plate holder and a base mounting plate that allows for easy removal of the front license plate
when desired and the quick replacement of the front license plate when needed.
When the front license plate holder is removed the remaining base plate is virtually undetectable.
The C7 Corvette Stingray Removable - STO N SHO™ License Plate Holder allows you to comply with state law while maintaining the beauty of your vehicle.
FREE GROUND SHIPPING TO ANY OF THE LOWER 48 STATES!
Fitment:
2014, 2015, 2016, 2017, 2018, 2019 C7 Corvette Stingray
If you have any questions don't hesitate to ask!
Our customer service team is available through email:
rpi.designs.customerservice@gmail.com
or
Call Toll-Free:
888.257.8515
You can contact our sales team at:
paulrpidesigns@gmail.com
If you would like to visit our Online Catalog and view all of the C7 Corvette Parts
and Merchandise that we have available for sale,
Click the link below…
Website Link:
RPI Designs’ C7 Corvette Online Catalog
Thank You!
Our customer service team is available through email:
rpi.designs.customerservice@gmail.com
or
Call Toll-Free:
888.257.8515
You can contact our sales team at:
paulrpidesigns@gmail.com
If you would like to visit our Online Catalog and view all of the C7 Corvette Parts
and Merchandise that we have available for sale,
Click the link below…
Website Link:
RPI Designs’ C7 Corvette Online Catalog
Thank You!
__________________
Last edited by RPIDON; 01-23-2020 at 09:53 AM.
#2
Melting Slicks
Will the bracket and/or plate hit the body of the Vette when driving highway speeds - and maybe a little above that.
Not sure how sturdy that area the bracket mounts to is.
I like the idea and the simplicity. Just don't want the wind pushing the plate or bracket back against the body of my new Vette and rubbing.
Not sure how sturdy that area the bracket mounts to is.
I like the idea and the simplicity. Just don't want the wind pushing the plate or bracket back against the body of my new Vette and rubbing.
#3
Platinum Supporting Vendor
Will the bracket and/or plate hit the body of the Vette when driving highway speeds - and maybe a little above that.
Not sure how sturdy that area the bracket mounts to is.
I like the idea and the simplicity. Just don't want the wind pushing the plate or bracket back against the body of my new Vette and rubbing.
Not sure how sturdy that area the bracket mounts to is.
I like the idea and the simplicity. Just don't want the wind pushing the plate or bracket back against the body of my new Vette and rubbing.
#5
Platinum Supporting Vendor
Thread Starter
#6
Platinum Supporting Vendor
Thread Starter
These are becoming a very popular option for the C7 Corvette owner
#7
Melting Slicks
There is another (unadvertised) benefit to this bracket. When approaching a curb or concrete bumper, this bracket is the first to scrape before damaging your car. If I had used this on my C6, it would have saved costly repair on the underside of the front bumper.
#8
Platinum Supporting Vendor
Thread Starter
Good tip, kinda a like a cheaper version of a curb alert. LOL
#9
Anyone else (3rd party of course) try this?
I have seen these and high speeds / wind seem to make these a bad choice.
Looking for any and all front plate options which look great, come off easy, and don't have problems at high speed and/or affect air flow intake.
I have seen these and high speeds / wind seem to make these a bad choice.
Looking for any and all front plate options which look great, come off easy, and don't have problems at high speed and/or affect air flow intake.
#10
Platinum Supporting Vendor
These are very solid, there is a similar product out there that is much lighter weight, that might flap in the breeze, but not this unit.
#12
Platinum Supporting Vendor
Thread Starter
Item # C7-809 use coupon code RPIDON5 on line or phone during check out and receive 5% off the listed website price !!
Website Link: http://www.rpidesigns.com/shop/item.aspx?itemid=3330
Website Link: http://www.rpidesigns.com/shop/item.aspx?itemid=3330
#16
Safety Car
www dot yatesperformance dot com/Instructions/XT4634 dot pdf
To answer your question no, it does not mount into existing holes. It requires drilling 4 holes. I dont know if these screw into sheet metal or plastic, but the instructions caution not to overtighten the screws:
Caution: When tightening the screws extreme care should be taken not to over tighten screws or the hole may become stripped and lose its ability to secure the base plate. Place the screw into the 10mm socket and begin to tighten. Once the screw is flush with the plate stop. Now tighten screw one half turn and stop.
I think I'd be inclined to add some VHB tape in addition to the 4 screws. Not terribly impressed with their instructions for fixing a misalignment of the plate, either: grab it a twist against those easily stripped screw holes. Would be nice if Don would respond.
Last edited by meyerweb; 04-19-2015 at 02:43 PM.
#17
Pro
I'm still waiting for my car to be delivered, so I can't go look at see whether it's being screwed into sheet metal, plastic, or what. If you can check that on your car, and let me know, I'd appreciate it. I'm trying to decide whether to order tonight, while it's 12% off.
#20
Platinum Supporting Vendor
C7 Corvette Stingray STO N SHO Front License Plate Bracket
The 2014 C7 Corvette Removable - STO N SHO™ License Plate Holder is a custom fit two piece detachable front license plate bracket mounting system consisting of a front license plate holder and a base mounting plate that allows for easy removal of the front license plate when desired and the quick replacement of the front license plate when needed. When the front license plate holder is removed the remaining base plate is virtually undetectable. The 2014 C7 Corvette Stingray Removable - STO N SHO™ License Plate Holder allows you to comply with state law while maintaining the beauty of your vehicle.
Item # C7-809 use coupon code RPIDON5 on line or phone during check out and receive 5% off the listed website price !!
Website Link: http://www.rpidesigns.com/shop/item.aspx?itemid=3330
The 2014 C7 Corvette Removable - STO N SHO™ License Plate Holder is a custom fit two piece detachable front license plate bracket mounting system consisting of a front license plate holder and a base mounting plate that allows for easy removal of the front license plate when desired and the quick replacement of the front license plate when needed. When the front license plate holder is removed the remaining base plate is virtually undetectable. The 2014 C7 Corvette Stingray Removable - STO N SHO™ License Plate Holder allows you to comply with state law while maintaining the beauty of your vehicle.
Item # C7-809 use coupon code RPIDON5 on line or phone during check out and receive 5% off the listed website price !!
Website Link: http://www.rpidesigns.com/shop/item.aspx?itemid=3330