When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
C7 Long Tube Header Options! | Best Pricing & FREE Shipping! | JDP Motorsports
Hi Everyone,
JDP Motorsports is proud to offer a variety of long tube and mid-length header options to free up some more power on your new C7 and out-perform your competition!
Primary Size Choices
1-3/4" Primaries up to 450 RWHP - Great Torque for lightly Modded Daily driver or road course racer
1-7/8" Primaries from 450-850 RWHP - Great Power for moderate mods to force induced beast
2" Primaries from 850+ RWHP - Great for maximum all out power, only recommended for the most extreme builds
JDP Motorsports will also match or BEAT any authorized dealers pricing with shipping. Call us 801-545-4215 or email us at sales@jdpmotorsports.com for more info.
Feature ARH's more emissions friendly option with 304 Tig Welded Stainless Steel 1 3/4" primaries, 3" merge collectors, welded o2 bungs, o2 extenders along with all the necessary hardware and gaskets for a bolt-on installation. This kit allows you to reuse the secondary set of factory cats combined with ARH's Severe Duty 49 State legal cats to ultimately improve performance while lowering the potential of an engine light without a tune.
Product Features:
Tig Welded 304 Stainless
Merge Collector Spike for better scavenging
Welded o2 Bungs with o2 Extenders
3/8" Ball Flange Collector for great leak free performance
Gaskets and Hardware included for a complete installation
Free Shipping!
Made in the USA!!
Price Match Guaranteed!!
Call, PM or Email for Pricing!
American Racing Headers - 1 3/4" x 3" Long Tube Headers
Without Cats - Part # C7-14134300LSNC | With Cats - Part # C7-14134300LSWC
American Racing Headers - 1 7/8" x 3" Long Tube Headers
Without Cats - Part # C7-14178300LSNC | With Cats - Part # C7-14178300LSWC
American Racing Headers - 2" x 3" Long Tube Headers
Without Cats - Part # C7-14200300LSNC | With Cats - Part # C7-14200300LSWC
Feature 304 Tig Welded Stainless Steel 1 3/4", 1 7/8" or 2" primaries, 3" merge collectors, welded o2 bungs, o2 extenders along with all the necessary hardware and gaskets for a bolt-on installation. The C7 Corvette American Racing Headers ends at the rear axle and are a direct fit to your factory cat-back or any aftermarket cat-back. Some modification may be required. The American Racing headers require a crossover x-pipe assembly and they are offered with or without converters.
Product Features
Tig Welded 304 Stainless
1-Piece Mandrel-Bent Primary Tubes
Merge Collector Spike for better scavenging
Welded o2 Bungs with o2 Extenders
3/8" Ball Flange Collector for great leak free performance
200 cell metallic substrate cats
Gaskets and Hardware included for a complete installation
Free Shipping!
Made in the USA!!
Price Match Guaranteed!!
Call, PM or Email for Pricing!
KOOKS
KOOKS - 1 7/8" x 3" Long Tube Headers - Part # 21702400
KOOKS - 2" x 3" Long Tube Headers - Part # 21702600
Feature 304 Tig Welded Stainless Steel 1 7/8" or 2" Primaries, 3" merge collectors, welded o2 bungs, o2 extenders along with all the necessary hardware and gaskets for a bolt-on installation.
The C7 Corvette KOOKS system was designed to bolt-on to a KOOKS crossover x-pipe assembly. The KOOKS headers require a crossover x-pipe assembly and they are offered with or without converters.
Product Features
Tig Welded 304 Stainless
1-Piece Mandrel-Bent Primary Tubes
Merge Collector Spike for better scavenging
Welded o2 Bungs with o2 Extenders
Ball Flange Collector for great leak free performance
Gaskets and Hardware included for a complete installation
Free Shipping!
Price Match Guaranteed!!
Call, PM or Email for Pricing!
STAINLESS WORKS
Stainless Works - 1 7/8" x 3" Long Tube Headers
With Cats - Part # C7188CAT | Without Cats - Part # C7188OR
Stainless Works - 2" x 3" Long Tube Headers
With Cats - Part # C72CAT | Without Cats - Part # C72OR
Features 304 Stainless Steel CNC mandrel-bent Primaries, welded o2 bungs, o2 extenders, and includes an x-pipe to connect to your factory or aftermarket exhaust, along with all the necessary hardware and gaskets for a bolt-on installation.
Product Features
Tig Welded 304 Stainless
CNC Mandrel-Bent Primary Tubes
Welded o2 Bungs with o2 Extenders
Slip Fit Collector
Gaskets and Hardware included for a complete installation
Free Shipping!
Made in the USA!
Price Match Guaranteed!!
Call, PM or Email for Pricing!
Please feel free to call, PM or email me anytime with questions or for pricing. We appreciate your interest in our products and look forward to hearing from you. Have a great day everyone!
We've got awesome deals all month on our C7 header packages! Please feel free to call, email or PM us anytime with questions. We appreciate the support and have a great day!
Lets stop being boring, and make your ear hear the beauty of your car!
if you have any question please give us a call or even email me! antonio@jdpmotorsports.com
best regards,
Antonio velarde
We got coupon codes for days! Let us know the part and you'll see how low we can go! Feel free to call, PM or email us at any time. Have a great day guys .
05-23-2014, 04:41 PM
C7 Long Tube Header Options! | Best Pricing & FREE Shipping! | JDP Motorsports
!
.
.