M12x1.5F x 200mm long Reverse Logic lug guide tool
#1
Former Vendor
Thread Starter
Member Since: Oct 2010
Location: Philadelphia PA
Posts: 1,250
Likes: 0
Received 53 Likes
on
45 Posts
M12x1.5F x 200mm long Reverse Logic lug guide tool
The Reverse Logic M12x1.5F female threaded lug guide tool, first introduced a year ago, has received many enthusiastic customer reviews. Several customers have requested a longer tool for use with very wide rear wheels. The original tool is 117mm long whereas the newly released M12x1.5F-200 tool is 200mm long.
Because of the extra length of this tool, at least three tools should be used to minimize the weight of the wheel/tire combination on each tool. The tools are sold in sets of three (3) for $60/set or sets of five (5) for $90/set. Storage cases are included with the tools.
http://www.reverselogic.us/shop.html...ool/p/62332249
Because of the extra length of this tool, at least three tools should be used to minimize the weight of the wheel/tire combination on each tool. The tools are sold in sets of three (3) for $60/set or sets of five (5) for $90/set. Storage cases are included with the tools.
http://www.reverselogic.us/shop.html...ool/p/62332249
Last edited by Fred@ReverseLogic; 03-01-2016 at 02:31 PM.
#2
Former Vendor
Thread Starter
Member Since: Oct 2010
Location: Philadelphia PA
Posts: 1,250
Likes: 0
Received 53 Likes
on
45 Posts
Photos of M12x1.5F-200
Here are a couple of photos of the 200mm long lug guide tools on a C7 track car under construction. The M12x1.5 studs shown in the photo are longer than the standard factory studs.
Last edited by Fred@ReverseLogic; 03-07-2016 at 10:40 PM.