Looking For Corvette's 06-18 To Partially Sponsor The All New Project 6GR Ten Spoke!!
#1
Supporting Vendor
Thread Starter
Looking For Corvette's 06-18 To Partially Sponsor The All New Project 6GR Ten Spoke!!
4 Enthusiasts....By Enthusiasts
The Project 6GR 10-spoke design has been in development as a collaboration between our wheel designers and also fellow enthusiasts like yourself.
We have been paying close attention, listening, and taking notes very carefully to be able to deliver exactly what you have asked for.
The end result of this teamwork is this simple & clean 10 spoke design to make any Corvette stand out from the crowd. We would like to thank everyone that provided their suggestions, comments, and feedback.
The spokes extending to the edge of the barrel provide a "larger" overall diameter appearance and also aids in providing strength.
The larger openings in-between the ten spokes will allow for the maximum viability of the nice braking components equipped on the Z06 platform, especially those nice Brembo brakes.
The best part is the fitment specifications will remain the same as the initial Seven and Five spoke design.
Meaning the same deep concave design and new bad *** look will be present on both the front and rear wheels.
Wheel Brand: Project 6GR Wheels
Wheel Model: TEN
Wheel Construction: Fully Forged
Wheels Sizes Available :
Front: 19x10.0 /20x10 & Rear 19x12.0 / 20x12.0
19/19 Set up Front 20.70 lbs & Rear 22.85 Lbs | 19/20 Set up Front 20.70 lbs. & Rear 23.47 lbs.
Concave Profiles: Front Deep Concave | Rear Deep Concave
Bolt Pattern: 5x120.65
Center Bore: 70.3(Hub Centric)
Standard Finish : Gloss Black
**Custom Finishes Upon Request **
Fitment Guide:
(Fits from 2006- 2018 Chevy Corvette Z06, Grand Sport and ZR1's )
Are You An Active Enthusiast?
Do You Attend Local Care Meets?
Are You active On Forums?
We Are Very Interested In The Corvette Community And Your Feedback!
If your vehicle is listed above and are interested in a partial sponsor!
please send us an email
with images of your vehicle and any social media site that you are apart of!
and we will go ahead and get back with all the details
Thank You!
Osvic
Osvic@n4sm.com
__________________
Email: osvic@n4sm.com | Phone: 818-547-5474 Cell: 323-440-3532
438 W Cypress St. Glendale, CA 91204 Website: www.n4sm.com www.Project6GR.com
Email: osvic@n4sm.com | Phone: 818-547-5474 Cell: 323-440-3532
438 W Cypress St. Glendale, CA 91204 Website: www.n4sm.com www.Project6GR.com
Last edited by need4speedmotors; 11-07-2018 at 01:04 PM.
#5
Racer
6GR Ten Spoke Sponsor
I have 2017 Grand Sport Collector Edition. I am a member of the Corvette forum and over 32 other Corvette Clubs. I do custom taillights for C4, C5, C6 Corvettes. I would love to get a set of Gunn Metallic gray with Tension blue highlights. I am a Real Estate agent and this car is my daily driver. I am in car shows most Saturday's and have no problem talking about my car. I am retired Air Force and 19 years of that being in Recruiting and 3 professional sales course. Meaning I can sell anything I want to.
The following users liked this post:
need4speedmotors (11-05-2018)
#6
Supporting Vendor
Thread Starter
I have 2017 Grand Sport Collector Edition. I am a member of the Corvette forum and over 32 other Corvette Clubs. I do custom taillights for C4, C5, C6 Corvettes. I would love to get a set of Gunn Metallic gray with Tension blue highlights. I am a Real Estate agent and this car is my daily driver. I am in car shows most Saturday's and have no problem talking about my car. I am retired Air Force and 19 years of that being in Recruiting and 3 professional sales course. Meaning I can sell anything I want to.
First and for most the team at Need 4 Speed Motorsports and myself would like to thank you for your service and your interest in our wheel line!
Please feel free to send us an email at osvic@n4sm.com or send us a PM regrading your interest in our Sponsorship program!
#10
#14
Supporting Vendor
Thread Starter
Happy Tuesday Corvette Enthusiast!
Project6gr 7 Spoke 19/20 Set Ups In Stock!
10 Spoke Available For Pre Order!
Custom Finishes Available!
Feel Free To Messages Us With Any Questions
Project6gr 7 Spoke 19/20 Set Ups In Stock!
10 Spoke Available For Pre Order!
Custom Finishes Available!
Feel Free To Messages Us With Any Questions
#15
Supporting Vendor
Thread Starter
Happy Monday Corvette Enthusiast! Project6gr Wheels Designed And Manufactured For The C7 Z06 In
The 19x10 front 19x12/20x12 Setup! No Spacers, No Adapters, No Hub Rings Needed!
Click Here To Chat With Our Wheel Specialist
The 19x10 front 19x12/20x12 Setup! No Spacers, No Adapters, No Hub Rings Needed!
Click Here To Chat With Our Wheel Specialist
#16
Supporting Vendor
Thread Starter
Happy Friday Corvette Enthusiast! Back Fresh From The Finisher!
Custom Finishing Available On The Project6gr Ten!
Click Here To Chat With Our Wheel Specialist
If You Ever Have Any Questions Please Feel Free To Email Us At osvic@n4sm.com
Custom Finishing Available On The Project6gr Ten!
Click Here To Chat With Our Wheel Specialist
If You Ever Have Any Questions Please Feel Free To Email Us At osvic@n4sm.com
#17
Supporting Vendor
Thread Starter
Happy Monday! Mercedes Enthusiast
Project6gr Ten Spoke Custom Gloss Black/ Teal Barrel
Can Custom Finish To Almost Any Color!
Click Here To Chat With Our Wheel Specialist
If You Ever Have Any Questions Please Feel Free To Email Us At osvic@n4sm.com
Project6gr Ten Spoke Custom Gloss Black/ Teal Barrel
Can Custom Finish To Almost Any Color!
Click Here To Chat With Our Wheel Specialist
If You Ever Have Any Questions Please Feel Free To Email Us At osvic@n4sm.com
#18
Supporting Vendor
Thread Starter
Happy Valentines Day Corvette Enthusiast!
PROJECT 6GR TEN FORGED – BRUSHED CANDY APPLE RED
Click Here To Chat With Our Wheel Specialist
If You Ever Have Any Questions Please Feel Free To Email Us At osvic@n4sm.com
PROJECT 6GR TEN FORGED – BRUSHED CANDY APPLE RED
Click Here To Chat With Our Wheel Specialist
If You Ever Have Any Questions Please Feel Free To Email Us At osvic@n4sm.com
#19
Supporting Vendor
Thread Starter
Happy Monday.
Here is a recap of this air breathing beast gets a clean look with the ZR-spec Project 6GR 7-SEVEN
wheels in the Carbon Fiber Hydro dip finish 🔥 Clears the massive carbon ceramic
Click Here To Chat With Our Wheel Specialist
If You Ever Have Any Questions Please Feel Free To Email Us At osvic@n4sm.com
Here is a recap of this air breathing beast gets a clean look with the ZR-spec Project 6GR 7-SEVEN
wheels in the Carbon Fiber Hydro dip finish 🔥 Clears the massive carbon ceramic
Click Here To Chat With Our Wheel Specialist
If You Ever Have Any Questions Please Feel Free To Email Us At osvic@n4sm.com