Ben@WeaponX

We've been working on our ZTX Spoiler Kit, inspired by the C7 ZR1 ZTK big wing and can offer a complete conversion kit with only MINOR modifications needed to the top of the rear bumper (Grand Sport and Z06's have the option to do the ZR1 rear bumper, but we have a very easy template and will save you money on the rear bumper and painting it). The first one is out of the mold to test fit and we will be receiving production orders in February! We are offering great discounts to pre-order customers as well so act now!

Order here:
https://weaponxmotorsports.com/produ...14290154881073

The wing is complete carbon fiber!

The stands are offered in 3 heights with low, standard ZR1 height, and 2" taller like the Viper ACR's roof height spoiler.

We also include our ZTX body style wing which has a fast back look because the OEM ZR1 rear body wing on mine leaves a little to be desired because it doesn't look very aggressive on the sides.

Ben@WeaponX

We've finished up the last piece and offer the COMPLETE conversion kit from start to finish for all C7 models. Checkout the link and pick your poison! Not only is this fully CAD designed and integrated with billet molds and prepreg carbon fiber for excellent fit and finish, but this kit is nearly half of what the OEM kit is and you don't need a VIN to get it Also, you need to be careful just buying the big wing and trying to piece it together yourself, because there are over 20 parts needed for the OEM conversion and the cost without the wing is STILL nearly $2000! So, our kit is not only top notch quality, but also extremely affordable by comparison to anything else on the market!

Body wing design is confirmed with fitment of the brake light and I'll have the first one here in a couple of weeks to do the complete ZTX big wing swap! We will be offering this wing without the bracket openings as well for any of you guys looking for a fast back style wing.







We've also beefed up with high wing brackets some as well since the taller height made them look a little too wimpy



And our front bumper trim pieces came out perfect and you don't even have to take the front bumper off of the ZR1!


https://weaponxmotorsports.com/produ...14331513471025

Ben@WeaponX

Carbon pieces have been rolling out to do the final test fit and rolling into production. I'm really excited about this stuff!!!

The ZTX Big Wing compared to the ZTK wing is done and rolling into production!
https://weaponxmotorsports.com/produ...tte-gs-z06-zr1









Front Bumper Side Rad Trim Bezels are test fit and looking killer!
https://weaponxmotorsports.com/produ...14331513471025



High wing brackets are finalized and we'll have them in before the end of the month:
https://weaponxmotorsports.com/produ...14304062636081


The ZTX Body Wing is finalized and rolling into production once I test fit the piece heading this way
https://weaponxmotorsports.com/produ...14327661068337


The ZTX Splitter is in and I'll have this test fit tomorrow!
https://weaponxmotorsports.com/produ...14290380030001


The ZTX Diffuser is almost finalized to test fit
https://weaponxmotorsports.com/produ...14331865432113

Ben@WeaponX

We just finished our first wing ZR1 style conversion mount up along with all of our other carbon fiber aero!

Ben@WeaponX

SharkgrayVetteZ06

Im interested, I did reach out to you guys via Instagram DM, IG is stormtroopervette if you could reply to the DM there. Thank you!

NofakeJake

Hi Ben,

If I order the standard ZTK high wing with standard hardware, will the high wing also attach to my factory low wing hardware, so I can interchange them?

In others words, will the hardware attached directly to the wing work on both your high wing struts and the factory OEM struts that bolt to the car.

Thanks you sir!