**Most Powerful C7 Z06**
#1
Supporting Vendor
Thread Starter
**Most Powerful C7 Z06**
For now... and not by much...lol
But like we have been telling everyone. We are still in the R&D process. We worked with Nick at American Racing and installed a set of 2" headers with a 3X3 X-pipe and also one of our prototype race cold air induction systems and of course spent hours on dyno tuning. We are trying to go in steps and test different combinations so we know what parts to put together to offer the best packages in the near future. We are still at factory boost levels, 8lbs down low and peaks at 10lbs at the end of the pull. Here is a dyno graph from today.
Video of first startup. Reving engine to get all the grease and oils out of system. These cars usually smoke for a good 5 minutes after installing a system like this. It sounds awesome at WOT and will post dyno vids for everyone to hear tomorrow.
I think my guys started another post about a group buy so anyone interested in some 2" American Racing headers please do not hesitate to call the shop. We plan to be able to ship 10 sets out around Christmas/new year for a discounted price and FREE shipping. Please call and leave a deposit now so you will not have to pay full retail come 2015.
But like we have been telling everyone. We are still in the R&D process. We worked with Nick at American Racing and installed a set of 2" headers with a 3X3 X-pipe and also one of our prototype race cold air induction systems and of course spent hours on dyno tuning. We are trying to go in steps and test different combinations so we know what parts to put together to offer the best packages in the near future. We are still at factory boost levels, 8lbs down low and peaks at 10lbs at the end of the pull. Here is a dyno graph from today.
Video of first startup. Reving engine to get all the grease and oils out of system. These cars usually smoke for a good 5 minutes after installing a system like this. It sounds awesome at WOT and will post dyno vids for everyone to hear tomorrow.
I think my guys started another post about a group buy so anyone interested in some 2" American Racing headers please do not hesitate to call the shop. We plan to be able to ship 10 sets out around Christmas/new year for a discounted price and FREE shipping. Please call and leave a deposit now so you will not have to pay full retail come 2015.
__________________
Worlds Quickest C8 Corvette 8.83@160MPH
FIRST C7 Corvette in the 7's & 9's
FIRST C7 Corvette in the 7's & 9's
2019 ZR1 LT5 8.874 @ 155
Current C7 World Record Holder 7.55 @ 184 MPH
Quickest and Fastest GEN5 LT Powered Vehicle
LMR1200HP Supercharged C7 8.84 @ 160
LMR1200HP Twin Turbo C7 9.35@155mph-2014
2 TIME OUTLAW DRAG RADIAL LSX CHAMPION 2008/2010
9.47 ZR1 Corvette-2009
LATE MODEL RACECRAFT
713-466-9900
LateModelRacecraft.com
Too many PMs, please call or email instead, thanks!
Current C7 World Record Holder 7.55 @ 184 MPH
Quickest and Fastest GEN5 LT Powered Vehicle
LMR1200HP Supercharged C7 8.84 @ 160
LMR1200HP Twin Turbo C7 9.35@155mph-2014
2 TIME OUTLAW DRAG RADIAL LSX CHAMPION 2008/2010
9.47 ZR1 Corvette-2009
LATE MODEL RACECRAFT
713-466-9900
LateModelRacecraft.com
Too many PMs, please call or email instead, thanks!
Last edited by Late Model Racecraft; 12-15-2014 at 09:11 PM.
#2
Safety Car
That is ridiculous power for only 10psi!
Nice work, guys.
Nice work, guys.
#4
Got Boost?!
So you guys still haven't changed the pulley yet?! I can't wait to see what this bad boy puts out w/ a pulley (700rwp?)
#6
Supporting Vendor
Thread Starter
Thank you for the kind words guys. We were very satisfied with these results and we are just as anxious as you to release our pulley upgrade kit to see how much power she will make with more boost. However engineering parts do take time so we will keep everyone updated on when we plan to start testing our prototype versions. We also have 2 cam shafts in stock just begging to be installed.
Jaime, hopefully we can install and tune yours before the new year! You are going to love the sound.
Jaime, hopefully we can install and tune yours before the new year! You are going to love the sound.
#12
That's awesome... intake/headers/tune 660 rwhp.
#13
Supporting Vendor
Thread Starter
This car had our race style cold air induction system as well as American Racing 2in headers. As soon as we get time we will show the gains from the headers alone. Nick makes a great system and not only do they perform but they sound awesome running through the factory mufflers.
#14
Supporting Vendor
Thread Starter
Sorry guys, very busy at shop tuning customer cars and did not have time to test headers only. I promise to at least get you guys a video of the car at WOT with headers on so you can hear the sound.
Do not forget to call the shop to get your name on the first 10 sets of headers for the new year. I think we have 8 on the list already so please call the shop today. If you have any questions regarding other upgrades please do not hesitate to ask when you call. We will have a package to accommodate everyone out there.
Do not forget to call the shop to get your name on the first 10 sets of headers for the new year. I think we have 8 on the list already so please call the shop today. If you have any questions regarding other upgrades please do not hesitate to ask when you call. We will have a package to accommodate everyone out there.
#16
Supporting Vendor
Thread Starter
Most power so far was 664rwhp with LMR race Cold Air and 2"in Headers. We are now in the process of R&D for cylinder heads, porting of supercharger, and cam shaft development. Also will take time to build a complete new heat exchanger setup a long with our upgraded lower pulley to add more boost.
And if thats not enough.....
Maybe Twin Turbo......
Last edited by Late Model Racecraft; 12-21-2014 at 12:05 PM.
#17
When will someone put a ported LT1 intake on one and go centri?