Notices
C7 Z06 Discussion General Z06 Corvette Discussion, LT4 Corvette Technical Info, Performance Upgrades, Suspension Setup for Street or Track
Sponsored by:
Sponsored by:

Got Carbon Fiber??? APR Performance CF

 
Old 01-09-2015, 02:36 PM
  #1  
DSOMonster
CF Senior Member
Thread Starter
 
DSOMonster's Avatar
 
Member Since: Apr 2006
Location: Chino Hills CA
Posts: 769
Thanked 26 Times in 23 Posts
Default Got Carbon Fiber??? APR Performance CF

For most of us with early NON-ZO7 packaged ZO6's, CFV was a pipe dream, at best! Most of us opted not to wait and took delivery with the CFZ package on our ZO6's.

APR Performance in Southern CA has this problem solved.

Notes:
- The rear diffuser is a thing of beauty. It will fit the Stingray. I am using the stock ZO6 side extensions.
- The heat shield on the rear diffuser is another touch of class.
- The side rockers are much larger and wider than the stock pieces.
- I added a pic of the stock rocker next to the APR rocker so you can see the difference.
- Check out the side mirrors.
- The front air damn/splitter is another work of art. It is much larger and wider than the stock ZO6 piece.
- The front winglets are in the works at APR. More to follow
- The front fender extensions are also in the works at APR. You can see in the pics, I am currently running with no winglets and the stock fender extensions. More to follow.
- Rear fender brake ducts...I know, I know the pics show the Stingray ducts sans the scoop or hood. These pieces are BEAUTIFUL. If you are partial to the more laid back look, this piece is for you! Not to worry...again...APR installed these pieces temporarily until the new production pieces are manufactured. More to follow.
- Rear fender lower duct pieces. These pieces are also in manufacturing. These should be ready soon. More to follow.
- The rear wing....AH, YES, the rear wing. I ordered my car with the Stage 3 aero. I know in the pic, my car has a Z51 wing with a clear wicker bill. The wing pictured really looks good for those who do not care for the NASCAR styling of the Stage 3 wing. It runs a little short due to the wide body of the ZO6 but not an issue. Not to worry, that wing is a "loaner" from APR. I will receive the 1st production ZO6 style wing from APR. More to follow.
- The hood insert is also in the works at APR. I should be receiving the intitial piece after production. More to follow.
- The front quarter panel inserts, where the ZO6 emblems are in laid, are also in the works. I should be receiving those pieces along with the others. More to follow.


Enough ranting, I will let the pics speak for themselves.































-Ron in SoCal

Last edited by DSOMonster; 01-09-2015 at 02:49 PM.
DSOMonster is offline  
Old 01-09-2015, 02:54 PM
  #2  
DSOMonster
CF Senior Member
Thread Starter
 
DSOMonster's Avatar
 
Member Since: Apr 2006
Location: Chino Hills CA
Posts: 769
Thanked 26 Times in 23 Posts
Default

Front Splitter...I almost forgot!





DSOMonster is offline  
Old 01-09-2015, 03:07 PM
  #3  
DSOMonster
CF Senior Member
Thread Starter
 
DSOMonster's Avatar
 
Member Since: Apr 2006
Location: Chino Hills CA
Posts: 769
Thanked 26 Times in 23 Posts
Default

For those of you who want more information. Here is the contact information for my rep over at APR Performance:

Tony Nguyen
TEAM APR
APR PERFORMANCE
225 Pacific St.
Pomona, CA 91768, USA
Tel (909) 594-3796
Fax(909) 594-3926
www.aprperformance.com
DSOMonster is offline  
Old 01-09-2015, 03:49 PM
  #4  
emericr
CF Senior Member
 
Member Since: Mar 2005
Location: Naples FL
Posts: 257
Thanked 10 Times in 8 Posts
Default

CF pieces looking great. Could you give us an idea of pricing?
When I order mine, I may forego OEM pieces if price is right.
emericr is offline  
Old 01-09-2015, 04:15 PM
  #5  
DSOMonster
CF Senior Member
Thread Starter
 
DSOMonster's Avatar
 
Member Since: Apr 2006
Location: Chino Hills CA
Posts: 769
Thanked 26 Times in 23 Posts
Default

For pricing and availability please contact the following person. Tony is really quick replying to emails. He is a cool dude to speak to also. I actually met Tony and the crew this past week, but that is because I am local.

Here goes Tony's email address:

Tony Nguyen
[email protected]
DSOMonster is offline  
Old 01-09-2015, 04:44 PM
  #6  
jmeisinger
Junior Member
 
Member Since: Jan 2007
Location: Connecticut
Posts: 24
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Originally Posted by DSOMonster View Post
For pricing and availability please contact the following person. Tony is really quick replying to emails. He is a cool dude to speak to also. I actually met Tony and the crew this past week, but that is because I am local.

Here goes Tony's email address:

Tony Nguyen
[email protected]
Thanks for the info. I just emailed Tony as I am interested in the Carbon Fiber Hood Air Vent as soon as it is available. I am also thinking about some of the other components.
jmeisinger is offline  
Old 01-09-2015, 04:51 PM
  #7  
Joezone914
CF Senior Member
 
Joezone914's Avatar
 
Member Since: Jun 2004
Location: Playa Vista CA
Posts: 1,210
Thanks: 0
Thanked 14 Times in 13 Posts
Default

Tony is a great guy and will take care of you. He has helped many forum brothers.
Joezone914 is offline  
Old 01-09-2015, 04:54 PM
  #8  
DSOMonster
CF Senior Member
Thread Starter
 
DSOMonster's Avatar
 
Member Since: Apr 2006
Location: Chino Hills CA
Posts: 769
Thanked 26 Times in 23 Posts
Default

Originally Posted by jmeisinger View Post
Thanks for the info. I just emailed Tony as I am interested in the Carbon Fiber Hood Air Vent as soon as it is available. I am also thinking about some of the other components.
jmeisinger,
Let me assure you, these APR parts are top-notch. No carbon-fiber overlays here! Each part is researched and developed using some CRAZY, SCIENTIFIC mumbo-jumbo !!!

All I know is they don't just slap stuff together and "HOPE" it works.

There is R&D involved in all of their stuff.

Our cars are not cheap! I was not about to put some cheap products on her!

I can't wait for the rest of the parts to be ready for installation!

-Ron
DSOMonster is offline  
Old 01-09-2015, 04:55 PM
  #9  
DSOMonster
CF Senior Member
Thread Starter
 
DSOMonster's Avatar
 
Member Since: Apr 2006
Location: Chino Hills CA
Posts: 769
Thanked 26 Times in 23 Posts
Default

Originally Posted by Joezone914 View Post
Tony is a great guy and will take care of you. He has helped many forum brothers.
DSOMonster is offline  
Old 01-09-2015, 05:17 PM
  #10  
jdurhan
CF Senior Member
Support Corvetteforum!
 
jdurhan's Avatar
 
Member Since: Jun 2006
Location: Fort Lauderdale FL
Posts: 3,490
Thanked 5 Times in 5 Posts
Default

It looks like it matches GM CF , is this the case / I have CF exposed roof and would like everything to pretty much match. Looks great, my checkbook is vibrating on my desk...lol
jdurhan is offline  
Old 01-09-2015, 05:34 PM
  #11  
DSOMonster
CF Senior Member
Thread Starter
 
DSOMonster's Avatar
 
Member Since: Apr 2006
Location: Chino Hills CA
Posts: 769
Thanked 26 Times in 23 Posts
Default

Perfect Match. Sorry for the crappy cell phone pics.

Here is the roof from GM:


Here is a shot of the rear quarter panel lower duct in CFZ, and the APR rocker panel.
DSOMonster is offline  
Old 01-09-2015, 05:35 PM
  #12  
DSOMonster
CF Senior Member
Thread Starter
 
DSOMonster's Avatar
 
Member Since: Apr 2006
Location: Chino Hills CA
Posts: 769
Thanked 26 Times in 23 Posts
Default

Originally Posted by jdurhan View Post
It looks like it matches GM CF , is this the case / I have CF exposed roof and would like everything to pretty much match. Looks great, my checkbook is vibrating on my desk...lol
Yours is vibrating, mine is smoking???

Oh well, ya only live once!
DSOMonster is offline  
Old 01-09-2015, 08:09 PM
  #13  
Bluedevil15
CF Senior Member
 
Bluedevil15's Avatar
 
Member Since: Oct 2014
Posts: 309
Thanks: 0
Thanked 0 Times in 0 Posts
Default

looks amazing!!!!!!!!!!!!!!! APR has amazing quality!

ill buy your old side skirts!
Bluedevil15 is offline  
Old 01-09-2015, 08:22 PM
  #14  
final gear
CF Senior Member
 
final gear's Avatar
 
Member Since: Jul 2007
Posts: 219
Thanks: 0
Thanked 14 Times in 13 Posts
Default

One beautiful Z06 !
final gear is offline  
Old 01-12-2015, 03:58 PM
  #15  
omarcoolguy
CF Senior Member
 
omarcoolguy's Avatar
 
Member Since: Oct 2006
Location: HANOVER PARK IL
Posts: 1,140
Thanks: 0
Thanked 0 Times in 0 Posts
Default Looks great

cant wait for them to finish, i would of sent my car there , but Chicago is not down the street !
omarcoolguy is offline  
Old 01-12-2015, 05:28 PM
  #16  
jmeisinger
Junior Member
 
Member Since: Jan 2007
Location: Connecticut
Posts: 24
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Originally Posted by DSOMonster View Post
jmeisinger,
Let me assure you, these APR parts are top-notch. No carbon-fiber overlays here! Each part is researched and developed using some CRAZY, SCIENTIFIC mumbo-jumbo !!!

All I know is they don't just slap stuff together and "HOPE" it works.

There is R&D involved in all of their stuff.

Our cars are not cheap! I was not about to put some cheap products on her!

I can't wait for the rest of the parts to be ready for installation!

-Ron
Thanks Ron. I am going to order the Carbon Fiber Hood Vent as soon as it becomes available and add on from there.
jmeisinger is offline  
Old 01-12-2015, 05:33 PM
  #17  
l888apex
CF Senior Member
 
l888apex's Avatar
 
Member Since: Aug 2014
Location: Loudoun VA
Posts: 286
Thanks: 0
Thanked 12 Times in 11 Posts
Default

How much are the mirror caps?
l888apex is offline  
Old 01-12-2015, 07:08 PM
  #18  
final gear
CF Senior Member
 
final gear's Avatar
 
Member Since: Jul 2007
Posts: 219
Thanks: 0
Thanked 14 Times in 13 Posts
Default

Originally Posted by l888apex View Post
How much are the mirror caps?
Here you go: http://shop.aprperformance.com/index...product_id=429
final gear is offline  
Old 01-12-2015, 07:35 PM
  #19  
hootowlc7
CF Senior Member
 
hootowlc7's Avatar
 
Member Since: Jan 2015
Location: Garnet Valley PA-Pennsylvania
Posts: 1,049
Thanked 84 Times in 56 Posts
Default

Originally Posted by final gear View Post
Would be nice to see a Z06 filter in the search. Nice looking products.
hootowlc7 is offline  
Old 01-13-2015, 11:09 AM
  #20  
DSOMonster
CF Senior Member
Thread Starter
 
DSOMonster's Avatar
 
Member Since: Apr 2006
Location: Chino Hills CA
Posts: 769
Thanked 26 Times in 23 Posts
Default

Originally Posted by omarcoolguy View Post
cant wait for them to finish, i would of sent my car there , but Chicago is not down the street !
Omar,
I got your PM.

LOL about Chi-Town not being down the street!!!

Don't worry about APR being in SoCal. Give Tony a call and he will get you the parts you want. Any Chevy dealer dealing with Corvette's can install these parts. The mounting holes and bolts are the same as factory.

Omar, the car looks FREAKING AMAZING, to answer your question.

APR is scheduling my ZO6 in for another round of measurements. Which means more parts!!!

Check out the pics, the CF is off the hook! Tony can send high-res pics of you need any close-ups. My photography skills are terrible.

-Ron
DSOMonster is offline  

Thread Tools
Search this Thread
Quick Reply: Got Carbon Fiber??? APR Performance CF


Sponsored Ads
Vendor Directory

Contact Us - About Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
 
  • Ask a Question
    Get answers from community experts
Question Title:
Description:
Your question will be posted in: