803rwhp / 760rwtq......Here kitty kitty.
#1
Instructor
Thread Starter
A8 ZO6 803rwhp/760rwtq......Here kitty kitty
Thought I would share the new dyno numbers for my brothers 2015 ZO6 A8..... 803rwhp / 760rwtq. Great job by Rob @ Lamar Walden Automotive
Mods are......Heads & Blower ported and polished, Long tube headers with x pipe, lower pulley swap, cold air kit, Cam swap, Thermal Reduction Plates, Expansion tank, and meth kit.
Mods are......Heads & Blower ported and polished, Long tube headers with x pipe, lower pulley swap, cold air kit, Cam swap, Thermal Reduction Plates, Expansion tank, and meth kit.
Last edited by 198plus; 09-26-2015 at 01:45 PM. Reason: Change title
The following users liked this post:
198plus (09-23-2015)
The following users liked this post:
198plus (09-23-2015)
#5
Team Owner
Better be careful as the Kitty has very sharp claws. After all, there are people who know how to make more horsepower with the Kitty.
#6
Team Owner
Thought I would share the new dyno numbers for my brothers 2015 ZO6 A8..... 803rwhp / 760rwtq. Great job by Rob @ Lamar Walden Automotive
Mods are......Heads & Blower ported and polished, Long tube headers with x pipe, lower pulley swap, cold air kit, Cam swap, Thermal Reduction Plates, Expansion tank, and meth kit.
Here's a video......
https://www.facebook.com/ronnie.d.sm...6583519339601/
Mods are......Heads & Blower ported and polished, Long tube headers with x pipe, lower pulley swap, cold air kit, Cam swap, Thermal Reduction Plates, Expansion tank, and meth kit.
Here's a video......
https://www.facebook.com/ronnie.d.sm...6583519339601/
The following users liked this post:
198plus (09-23-2015)
The following users liked this post:
198plus (09-23-2015)
#8
Burning Brakes
Rob and company built my Procharged 427 C5 in 2007, and it's loafing at 903 at the wheels with the original, restrictive dual intercoolers and a marginal fuel system. Walden is not nearly as showy as their neighbors Vengeance, but they do good work.
#9
Instructor
Thread Starter
#10
Race Director
If any ran into an 800rwhp A8 I hope kitty's been going to the gym, or else it could get bad. And if it does by chance make 1000+ HP to keep up, just add some turns to the equation and kitty'll be way behind (or worse)
The following users liked this post:
198plus (09-23-2015)
#11
Race Director
It definitely is I would like to see how the transmission does at these power levels
Last edited by tail_lights; 09-25-2015 at 06:22 PM. Reason: forgot a letter LOL
The following users liked this post:
198plus (09-23-2015)
#12
The Consigliere
Member Since: May 2006
Location: 2023 Z06 & 2010 ZR1
Posts: 22,252
Received 5,447 Likes
on
2,272 Posts
OP - big numbers on that Z. Car will need some drag radials to be able to put that power down.
#13
Going to be a whole lotta fun trying to put it down on the street. Sounds like a job for a street hooligan
The following users liked this post:
198plus (09-23-2015)
#14
Instructor
Thread Starter
Thanks........It has 335/30/18 Hoosier drag radials on it now and he has a set of the new M/T 33/25/20 ET Street S/S on order now should be in around the first week of October.
#17
The Consigliere
Member Since: May 2006
Location: 2023 Z06 & 2010 ZR1
Posts: 22,252
Received 5,447 Likes
on
2,272 Posts
The following users liked this post:
198plus (09-23-2015)
#19
#20
modded Z meet modded hellcat. Now what?