Another ProCharger Z06 hitting the streets.... 944 rwhp!
#1
Former Vendor
Thread Starter
Another ProCharger Z06 hitting the streets.... 944 rwhp!
This car features a F-1R headunit... and is a package offered by Advanced Modern Performance.
Pump Gas + Meth
Stock Short Block
Stock Injectors
Stock Fuel System
Can't wait to see more videos of these cars popping up!
Pump Gas + Meth
Stock Short Block
Stock Injectors
Stock Fuel System
Can't wait to see more videos of these cars popping up!
Last edited by Zymurgy; 12-26-2015 at 05:48 PM. Reason: Link to non-suppporting vendor removed
#4
Former Vendor
Thread Starter
There is about 20 builds going on right now with A8 cars alone.
Hopefully one of them will hit the 1/4 mile. (Since the Autos have a much better chance of making a good number)
The stick cars, one would assume will stick to the street.
Hopefully one of them will hit the 1/4 mile. (Since the Autos have a much better chance of making a good number)
The stick cars, one would assume will stick to the street.
#5
Premium Supporting Vendor
That engine would look awesome with Katech valve covers.
Last edited by Zymurgy; 12-26-2015 at 05:49 PM. Reason: Removed link to non-supporting vendor in quoted post
#7
That's about right out of an f1r.... How much more room out of the blower, assuming it's pretty close to max impeller speed!??
Got a buddy doing an f1x on his Z, it's a M7 but he can drive, don't need an A8 to go fast down the 1/4
Got a buddy doing an f1x on his Z, it's a M7 but he can drive, don't need an A8 to go fast down the 1/4
#9
Former Vendor
Thread Starter
#10
Le Mans Master
So where is the 'street' video?
The following 2 users liked this post by v jet:
BigNastyZO7 (12-14-2015),
DRLC5 (12-16-2015)
#12
#15
Former Vendor
Thread Starter
I can't post videos involving illegal street activities for obvious reasons.
So don't look for those on the ProCharger FB page.
Might want to reach out to AMP directly, or their page for that.
However, most companies will never show that sort of thing.
So don't look for those on the ProCharger FB page.
Might want to reach out to AMP directly, or their page for that.
However, most companies will never show that sort of thing.
#16
Burning Brakes
Member Since: Aug 2009
Location: DFW Texas
Posts: 845
Likes: 0
Received 0 Likes
on
0 Posts
We have yet to break any drivetrain parts on the ones we have built. The yellow car we built months ago still has a stock clutch in it. IF your going drag racing i would suggest a clutch for sure and maybe axles. Just because there is a aftermarket part made doesn't mean its necessary or even a upgrade. We kept the yellow car as stock as possible to test what the car is capable of. So far it has been rock solid.
Last edited by Zymurgy; 12-26-2015 at 05:54 PM. Reason: removed email contact of non-supporting vendor
#17
Le Mans Master
We will be taking ours to the 1/4
The following users liked this post:
383vett (12-20-2015)
#20
Former Vendor
Thread Starter
I was really glad to see someone push the LT-4 with the stock cam, to see just how well it would work with the ProCharger.