Any vendors paint the fromt emblems
#1
Drifting
Thread Starter
Any vendors paint the fromt emblems
Does anyone paint front emblems?i want to paint the red white and the chevy symbol black to match my rpi designs fender emblem.
#2
Melting Slicks
Member Since: Sep 2006
Location: Louisville Ky NCM Lifetime Member 429 (Member Since 1993)
Posts: 3,257
Received 261 Likes
on
182 Posts
St. Jude Donor '12-'13, '16
Ditto here. I want to coordinate the color scheme of my custom painted Z06 emblems from RPI, and the front/rear flags.
The following users liked this post:
Arctic Blastoff (12-24-2015)
#3
Drifting
You can Spray them yourself. Not hard to do. I did mine in Carbon flash to match the rest of my trim. Remove them with fishing line and a hair dryer/heat gun, tape whatever you don't want to paint, apply an adhesion promoter/primer, apply 2 coats of carbon flash, apply some clear coat. Did mine on a Saturday afternoon, took about 2-3 hours total.
#4
Drifting
Thread Starter
You can Spray them yourself. Not hard to do. I did mine in Carbon flash to match the rest of my trim. Remove them with fishing line and a hair dryer/heat gun, tape whatever you don't want to paint, apply an adhesion promoter/primer, apply 2 coats of carbon flash, apply some clear coat. Did mine on a Saturday afternoon, took about 2-3 hours total.
#6
Drifting
Thread Starter
I think the chevy symbol and the other two tiny symbols will the be the most difficult. I just want the chevy symbol in black an the red side to white.I think yours would look good as well with some blue on the emblem.
Last edited by Arctic Blastoff; 12-25-2015 at 12:17 PM.
#7
Drifting
Thread Starter
Thats how i want mine done,theres has to be someone that does detailed painting.Not the best example lol
Last edited by Arctic Blastoff; 12-29-2015 at 04:37 PM.
The following users liked this post:
Arctic Blastoff (12-29-2015)