Paint problems around fender vents
#241
Le Mans Master
Member Since: Oct 2005
Location: Plymouth Massachusetts
Posts: 9,460
Received 3,078 Likes
on
1,729 Posts
Finalist 2020 C7 of the Year -- Unmodified
Dave, 2017's have the same issue, look closely at the very bottom corner of your Z06 fender vents where they touch the body color. Mine didn't do it at first. I think the torque with the Z06 plays a role in this issue. It starts small and gets worse. I and others have seen many 2017's with the problem before they even leave the lot.
-Garry
-Garry
#242
Burning Brakes
Member Since: Nov 2007
Location: Pacific Northwest
Posts: 1,081
Received 894 Likes
on
309 Posts
2022 C8 of the Year Finalist - Unmodified
2022 C2 of the Year Finalist -- Unmodified
Folks, the newly designed Z06 Fender Vents are now available for your Chevrolet dealers body shop to order from Bowling Green. My warranty replacement vents are at my dealer as of today and my car goes in next week for this issue to finally get resolved. Just wanted to update you all. I will post pics of the new vents when I get the car back.
Cheers,
-Garry
Cheers,
-Garry
The following 2 users liked this post by GarryL:
robertbruce (05-22-2018),
SSTG (05-22-2018)
#243
Le Mans Master
Folks, the newly designed Z06 Fender Vents are now available for your Chevrolet dealers body shop to order from Bowling Green. My warranty replacement vents are at my dealer as of today and my car goes in next week for this issue to finally get resolved. Just wanted to update you all. I will post pics of the new vents when I get the car back.
Cheers,
-Garry
Cheers,
-Garry
#245
Racer
This is a brand new car on the dealer floor.
Brand new zo6 fender chipping
Passenger side
My AW 17 chipped fender passenger side
Driver side
I refuse to let a body shop paint only the chipped panels and have the color never match. I WILL NOT allow my 100k+ Zo6 to be repainted for a factory defects. And they expect to have me pay to re clearbra it. GM is a joke. Trash car. My second AW 17 ZO6 and it’s even worse then the first. GL GM you should replace our factory defects with factory painted panels or buy these cars back. I will NOT repaint a entire front end to the doors for my bumper chipping, fenders chipping etc. Trash ! I’ve never seen a Honda peel paint or any other car in the world. Built on Friday !
Brand new zo6 fender chipping
Passenger side
My AW 17 chipped fender passenger side
Driver side
I refuse to let a body shop paint only the chipped panels and have the color never match. I WILL NOT allow my 100k+ Zo6 to be repainted for a factory defects. And they expect to have me pay to re clearbra it. GM is a joke. Trash car. My second AW 17 ZO6 and it’s even worse then the first. GL GM you should replace our factory defects with factory painted panels or buy these cars back. I will NOT repaint a entire front end to the doors for my bumper chipping, fenders chipping etc. Trash ! I’ve never seen a Honda peel paint or any other car in the world. Built on Friday !
#247
This is really a shame for guys like me. I have a 2015 Z and my B2B warranty ran out 2 months ago. I noticed this problem on my car just a week or so after the B2B warranty expired. Looks like I'm up $hit creek....
#248
Pro
Dealer informed me that I am the first person to complain about this issue with GM and there are no "new" vents available. I feel pretty special LOL. I have the issue on only one side and it's touched up for now but hopefully it doesn't get worse. I'll probably toss an email to the GM head of body design to see what he has to say.
Last edited by blackbirdws6; 06-08-2018 at 03:18 PM.
The following users liked this post:
Vegas1500 (08-08-2018)
#250
Melting Slicks
Same dealer says they have never heard of the problem and car sitting on their lot has chipped paint in these locations. LOL. Can't sell it for some reason. LOL.
The following 2 users liked this post by djnice:
ArnoldZO6 (06-08-2018),
blackbirdws6 (06-08-2018)
#251
Pro
Fender vents
Dealer informed me that I am the first person to complain about this issue with GM and there are no "new" vents available. I feel pretty special LOL. I have the issue on only one side and it's touched up for now but hopefully it doesn't get worse. I'll probably toss an email to the GM head of body design to see what he has to say.
#252
Race Director
Member Since: Jul 2008
Location: The Sunshine State
Posts: 16,992
Received 2,673 Likes
on
1,479 Posts
2022 C5 of the Year Finalist - Modified
2021 C5 of the Year Finalist - Modified
C7 of the Year - Modified Finalist 2021
Finalist 2020 C7 of the Year -- Modified
2020 C5 of the Year Finalist - Modified
C5 of Year Finalist (appearance mods) 2019
2018 C5 of Year Finalist
This is a brand new car on the dealer floor.
Brand new zo6 fender chipping
Passenger side
My AW 17 chipped fender passenger side
Driver side
I refuse to let a body shop paint only the chipped panels and have the color never match. I WILL NOT allow my 100k+ Zo6 to be repainted for a factory defects. And they expect to have me pay to re clearbra it. GM is a joke. Trash car. My second AW 17 ZO6 and it’s even worse then the first. GL GM you should replace our factory defects with factory painted panels or buy these cars back. I will NOT repaint a entire front end to the doors for my bumper chipping, fenders chipping etc. Trash ! I’ve never seen a Honda peel paint or any other car in the world. Built on Friday !
Brand new zo6 fender chipping
Passenger side
My AW 17 chipped fender passenger side
Driver side
I refuse to let a body shop paint only the chipped panels and have the color never match. I WILL NOT allow my 100k+ Zo6 to be repainted for a factory defects. And they expect to have me pay to re clearbra it. GM is a joke. Trash car. My second AW 17 ZO6 and it’s even worse then the first. GL GM you should replace our factory defects with factory painted panels or buy these cars back. I will NOT repaint a entire front end to the doors for my bumper chipping, fenders chipping etc. Trash ! I’ve never seen a Honda peel paint or any other car in the world. Built on Friday !
#253
Burning Brakes
Member Since: Nov 2007
Location: Pacific Northwest
Posts: 1,081
Received 894 Likes
on
309 Posts
2022 C8 of the Year Finalist - Unmodified
2022 C2 of the Year Finalist -- Unmodified
I refuse to let a body shop paint only the chipped panels and have the color never match. I WILL NOT allow my 100k+ Zo6 to be repainted for a factory defects. And they expect to have me pay to re clearbra it. GM is a joke. Trash car. My second AW 17 ZO6 and it’s even worse then the first. GL GM you should replace our factory defects with factory painted panels or buy these cars back. I will NOT repaint a entire front end to the doors for my bumper chipping, fenders chipping etc. Trash ! I’ve never seen a Honda peel paint or any other car in the world. Built on Friday !
-GarryL
https://www.corvetteforum.com/forums...the-paint.html
The following users liked this post:
Lyn Go Fast (06-08-2018)
#254
Le Mans Master
#255
Race Director
Member Since: Jul 2008
Location: The Sunshine State
Posts: 16,992
Received 2,673 Likes
on
1,479 Posts
2022 C5 of the Year Finalist - Modified
2021 C5 of the Year Finalist - Modified
C7 of the Year - Modified Finalist 2021
Finalist 2020 C7 of the Year -- Modified
2020 C5 of the Year Finalist - Modified
C5 of Year Finalist (appearance mods) 2019
2018 C5 of Year Finalist
My 2019 Z06 was delivered yesterday to the dealer. I took these pictures today when I stopped in to complete the paperwork and I will be picking up the car tomorrow post PDI.
I went with Arctic White and the Shark Gray vents so hopefully these pictures will help determine any subtle changes made in the vent design for 2019. I inspected both vents carefully and didn't see any type of paint rubbing, however the car was only built 6 days ago. I will take better pics once the car is cleaned up, prepped and the Z07 areo components are installed.
Driver Side
Passenger Side
I went with Arctic White and the Shark Gray vents so hopefully these pictures will help determine any subtle changes made in the vent design for 2019. I inspected both vents carefully and didn't see any type of paint rubbing, however the car was only built 6 days ago. I will take better pics once the car is cleaned up, prepped and the Z07 areo components are installed.
Driver Side
Passenger Side
Last edited by MSG C5; 07-18-2018 at 11:04 AM.
#256
Racer
I have seen a few later 18” models and 19 to not have this issue anymore as the vent has been redesigned to fit better and be smaller overall... still don’t want to repaint my car even though the new panels have been released. Will ruin it even more tbh
#257
Le Mans Master
I have one of the last built 2018 Z painted in the new shop. I have been watching the vents like a hawk. So far so good.
#258
Burning Brakes
Member Since: Aug 2009
Location: Sturgeon County Alberta
Posts: 1,018
Received 256 Likes
on
168 Posts
Folks, the newly designed Z06 Fender Vents are now available for your Chevrolet dealers body shop to order from Bowling Green. My warranty replacement vents are at my dealer as of today and my car goes in next week for this issue to finally get resolved. Just wanted to update you all. I will post pics of the new vents when I get the car back.
Cheers,
-Garry
Cheers,
-Garry
#259
Shark gray.
this is what i would have loved to do BUT they don't make shark gray anymore lol...
is what it is. i love this car.....drove it today on some backroads and had some very light fun with a new (temp tag)M550 (whatever that is) and a fiesta ST.. everyone wants a piece of this car
i'm going to do the same with an exacto knife and have it prepped good building the touch up paint over time.. it's barely noticeable from a foot like another member mentioned.
is what it is. i love this car.....drove it today on some backroads and had some very light fun with a new (temp tag)M550 (whatever that is) and a fiesta ST.. everyone wants a piece of this car
i'm going to do the same with an exacto knife and have it prepped good building the touch up paint over time.. it's barely noticeable from a foot like another member mentioned.
The heartbreaker/fury maker.
Hood was pushed up and bumper cover squished when it happened also. Have since been reshaped, aligned and located. All it needs is paint on the bumper cover
Another paint code
Be sure to wear respirator!
Preparation and patience are key always.
Practice fender.
Midway through spray
Will be having a look at the side vent issue as well. Took mine off while doing this because well, paint but also am adding a west coast corvette complete vent/exhaust light kit (which quit working once exhaust end was added). If you take yours off reinstall with the fender off to insure proper torque/placement or it will shake free if you do any real driving. First time commenting or posting but surely not the first time reading. Thank you all for the collective knowledge and advice.