GM Accessories @ COST
#1
Former Vendor
Thread Starter
GM Accessories @ COST
Trunk Monkey Parts has updated pricing on ALL our Accessory parts!!!
These Accessories are discounted BELOW employee pricing @ Dealer COST!!
Chevrolet, GMC, Cadillac, Buick, & few others
From Car Covers to Mud Flaps, All-weather mats and cargo liners,
tonneau covers, armrests, Accessory wheels - you name it!!!
If it is a GM accessory that is still in production that you are in search for just give us a call,
We will source it for you and ship it out AS SOON AS POSSIBLE,
We have a nationwide locator so even if it is not in our stock but is available from another Certified GM Dealer we can get it for you!
Trunk Monkey Parts specializes in quality OEM and Aftermarket parts and Accessories for your vehicle.
Your Source for OEM and Aftermarket Accessories
These Accessories are discounted BELOW employee pricing @ Dealer COST!!
Chevrolet, GMC, Cadillac, Buick, & few others
From Car Covers to Mud Flaps, All-weather mats and cargo liners,
tonneau covers, armrests, Accessory wheels - you name it!!!
If it is a GM accessory that is still in production that you are in search for just give us a call,
We will source it for you and ship it out AS SOON AS POSSIBLE,
We have a nationwide locator so even if it is not in our stock but is available from another Certified GM Dealer we can get it for you!
Trunk Monkey Parts specializes in quality OEM and Aftermarket parts and Accessories for your vehicle.
Your Source for OEM and Aftermarket Accessories
#2
Le Mans Master
I think a lot of people would be interested in this. What would be the final price on this part please?
C7 CORVETTE EXPOSED CARBON FIBER GROUND EFFECTS - FRONT SPLITTER & ROCKER PANELS LEFT & RIGHT - 2015 Chevrolet Corvette (23495173)
C7 CORVETTE EXPOSED CARBON FIBER GROUND EFFECTS - FRONT SPLITTER & ROCKER PANELS LEFT & RIGHT - 2015 Chevrolet Corvette (23495173)
#3
Former Vendor
Thread Starter
#4
Le Mans Master
#5
Former Vendor
Thread Starter
For example, we have them listed, but they are $1,160.03 per side.
So really it makes most sense to buy the kit, money goes much farther, and you may be able to sell the front splitter to a member that wants just that?
#6
I'm looking for a C7 Z06 Hood Stinger in Carbon Fiber. What are my chooses?
#7
Former Vendor
Thread Starter
that is the hood itself.
The Hood Stinger you are referring to is a decal in carbon flash,
there are Jake skull logos for the hood as well.
I hope that answers your question
#8
Parts - Stage 2
I can not get through with the phone number provided. Is it possible to get an idea of cost for front and rear spoiler, and right and left side skirts in carbon flash? I think this is all that make it a stage 2 form stage 1 correct?
2015 Z06
Thank you for your time.
2015 Z06
Thank you for your time.
#9
Burning Brakes
Member Since: Sep 2007
Location: Cedar Rapids Iowa
Posts: 919
Likes: 0
Received 25 Likes
on
14 Posts
I see the GM Jake hood Stinger for the Z06 on your site (#23360470)
Is the graphic carbon flash in color? Judging by the photo of the white car, I would think it would be everything not white on the hood? Also the photo is shown on a white Stingray, but I assume the Z06 part is correct for the Z06 hood?
Thanks. (photo from your site)
Is the graphic carbon flash in color? Judging by the photo of the white car, I would think it would be everything not white on the hood? Also the photo is shown on a white Stingray, but I assume the Z06 part is correct for the Z06 hood?
Thanks. (photo from your site)
Last edited by Hot Rod Todd; 01-14-2016 at 04:36 PM.
#10
Former Vendor
Thread Starter
you can give us a call at 503-668-5555 and ask for parts
GROUND EFFECTS, CARBON FLASH - GM (23495172)
NEW GM "STAGE 2" REAR SPOILER EXTENSION KIT 2015 CORVETTE Z06 - GM (23256573)
This would complete the Stage 2 setup,
the larger (Z07) front winglets and the rear center wickerbill complete the Stage 3 kit which we also have available
#11
Former Vendor
Thread Starter
I see the GM Jake hood Stinger for the Z06 on your site (#23360470)
Is the graphic carbon flash in color? Judging by the photo of the white car, I would think it would be everything not white on the hood? Also the photo is shown on a white Stingray, but I assume the Z06 part is correct for the Z06 hood?
Thanks. (photo from your site)
Is the graphic carbon flash in color? Judging by the photo of the white car, I would think it would be everything not white on the hood? Also the photo is shown on a white Stingray, but I assume the Z06 part is correct for the Z06 hood?
Thanks. (photo from your site)
Yes that is correct,
the graphic is carbon flash,
also there is a picture of it on a black C7R with the exposed carbon fiber to show the different looks it can provide
C7 CORVETTE NEW GENUINE GM HOOD DECAL JAKE SKULL LOGO (AS SEEN ON C7R) - GM (23270637)
Last edited by subchev; 01-20-2016 at 04:53 PM.
#12
So please clear this up? Is the higher priced Stinger with exposed carbon fiber look in the overlay? or does it only work on the 2016 with exposed carbon fiber hood?
I have a 2015 Z06 that I'm looking for an visible carbon fiber look, and I may accept the Jake overlay if the black porsion is a nice match to the Visable Carbon Fiber on my Top, Splitter, Side skirts.
Thanks for the information.
I have a 2015 Z06 that I'm looking for an visible carbon fiber look, and I may accept the Jake overlay if the black porsion is a nice match to the Visable Carbon Fiber on my Top, Splitter, Side skirts.
Thanks for the information.
#13
Le Mans Master
Do you have Z06 wheels? How much for set?
Jim
Jim
#14
Racer
Yes that is correct, the graphic is carbon flash, also there is a picture of it on a black C7R
with the exposed carbon fiber to show the different looks it can provide
And this one is for the Z06
with the exposed carbon fiber to show the different looks it can provide
And this one is for the Z06
How well will this graphic here for the Z06 work on that existing Black-Flash stinger??
_
#15
Burning Brakes
Member Since: Sep 2007
Location: Cedar Rapids Iowa
Posts: 919
Likes: 0
Received 25 Likes
on
14 Posts
So please clear this up? Is the higher priced Stinger with exposed carbon fiber look in the overlay? or does it only work on the 2016 with exposed carbon fiber hood?
I have a 2015 Z06 that I'm looking for an visible carbon fiber look, and I may accept the Jake overlay if the black porsion is a nice match to the Visable Carbon Fiber on my Top, Splitter, Side skirts.
Thanks for the information.
I have a 2015 Z06 that I'm looking for an visible carbon fiber look, and I may accept the Jake overlay if the black porsion is a nice match to the Visable Carbon Fiber on my Top, Splitter, Side skirts.
Thanks for the information.
The following users liked this post:
VetterFlyer (01-15-2016)
#16
Former Vendor
Thread Starter
I have not heard of a "black-flash"
The decal is available in a cyber gray,
or there is carbon flash (black metallic flash) which is what most of the vents/scoops are painted and the grille usually.
there is exposed carbon fiber (obviously carbon fiber) which is not a decal whatsoever. Carbon Fiber and Carbon Flash are not the same.
This graphic will disappear if you place it over your current decal.
#17
Former Vendor
Thread Starter
So please clear this up? Is the higher priced Stinger with exposed carbon fiber look in the overlay? or does it only work on the 2016 with exposed carbon fiber hood?
I have a 2015 Z06 that I'm looking for an visible carbon fiber look, and I may accept the Jake overlay if the black porsion is a nice match to the Visable Carbon Fiber on my Top, Splitter, Side skirts.
Thanks for the information.
I have a 2015 Z06 that I'm looking for an visible carbon fiber look, and I may accept the Jake overlay if the black porsion is a nice match to the Visable Carbon Fiber on my Top, Splitter, Side skirts.
Thanks for the information.
As just mentioned,
the graphic is just carbon flash.
The decal actually covers the carbon fiber and the exposure that you are seeing is the portions where there is no decal.
If you want the exposed carbon fiber behind the decal,
you will need to replace your hood with a real carbon fiber hood.
I hope this helps.
#18
Racer
ok I'm a little confused.
I have not heard of a "black-flash"
The decal is available in a cyber gray,
or there is carbon flash (black metallic flash) which is what most of the vents/scoops are painted and the grille usually.
there is exposed carbon fiber (obviously carbon fiber) which is not a decal whatsoever. Carbon Fiber and Carbon Flash are not the same.
This graphic will disappear if you place it over your current decal.
I have not heard of a "black-flash"
The decal is available in a cyber gray,
or there is carbon flash (black metallic flash) which is what most of the vents/scoops are painted and the grille usually.
there is exposed carbon fiber (obviously carbon fiber) which is not a decal whatsoever. Carbon Fiber and Carbon Flash are not the same.
This graphic will disappear if you place it over your current decal.
OK! I got my terminology wrong when I said "Black-Flash" rather than calling it "Carbon-Flash" and also when I referred to the exposed "Carbon-Fiber" stinger as "Carbon-Flash". So, maybe we now have a mutual understanding of what I was trying to say.
Now, here is my problem with this decal; I have purchased one from "Trunk-Monkey" and I am not sure how to apply it or even if it is what I was told it was by the sells person. It has no instuctions with it and appears to be one large decal with the "silver-gray" skull on a "black back-ground", all one decal. My car already has the black "Carbon-Flash" stinger on it from the factory and all I wanted was to be able to apply just the "gray skull" part onto my existing black "Carbon-Flash" stinger and NOT cover the whole stinger with another decal. If I am correct about this decal it would work OK for someone who had no stinger color other than the cars body color(?)! I was told by the sells person (I placed an online order after calling and asking this very question for clarification) that the decal would apply the way I was wanting (skull only); however, it appears to be one large decal with the gray-skull and black-back ground all one application. I do not want to cover my whole existing black (Carbon-Flash) stinger with a decal. My understanding is that the original black "Carbon-Flash" stinger is actually already a decal itself.
I am apprehensive about starting to apply this decal until I fully understand what I have here (No Instruction or description of application procedure included)! I know that it is basically a peel and stick decal, but it would help if there were a few suggestions as to how to proceed with this install. However, again, my present concern is what constitutes the whole of the decal(??)!
Have I been clear here with my explanation of what I expected to get out of this application or am I making it even worse for your understanding of my concern.
BTW, what does your last comment, "This graphic will disappear if you place it over your current decal." actually mean??
I have the feeling that you may have answered my primary concern with that statement, but want further clarification. I
am afraid you are indeed telling me that this decal will cover entirely my current factory installed "Carbon-Flash" decal(?)!
_
Last edited by Sk8Man_; 01-15-2016 at 04:07 PM.
#19
Former Vendor
Thread Starter
OK! I got my terminology wrong when I said "Black-Flash" rather than calling it "Carbon-Flash" and also when I referred to the exposed "Carbon-Fiber" stinger as "Carbon-Flash". So, maybe we now have a mutual understanding of what I was trying to say.
Now, here is my problem with this decal; I have purchased one from "Trunk-Monkey" and I am not sure how to apply it or even if it is what I was told it was by the sells person. It has no instuctions with it and appears to be one large decal with the "silver-gray" skull on a "black back-ground", all one decal. My car already has the black "Carbon-Flash" stinger on it from the factory and all I wanted was to be able to apply just the "gray skull" part onto my existing black "Carbon-Flash" stinger and NOT cover the whole stinger with another decal. If I am correct about this decal it would work OK for someone who had no stinger color other than the cars body color(?)! I was told by the sells person (I placed an online order after calling and asking this very question for clarification) that the decal would apply the way I was wanting (skull only); however, it appears to be one large decal with the gray-skull and black-back ground all one application. I do not want to cover my whole existing black (Carbon-Flash) stinger with a decal. My understanding is that the original black "Carbon-Flash" stinger is actually already a decal itself.
I am apprehensive about starting to apply this decal until I fully understand what I have here (No Instruction or description of application procedure included)! I know that it is basically a peel and stick decal, but it would help if there were a few suggestions as to how to proceed with this install. However, again, my present concern is what constitutes the whole of the decal(??)!
Have I been clear here with my explanation of what I expected to get out of this application or am I making it even worse for your understanding of my concern.
BTW, what does your last comment, "This graphic will disappear if you place it over your current decal." actually mean??
I have the feeling that you may have answered my primary concern with that statement, but want further clarification. I
am afraid you are indeed telling me that this decal will cover entirely my current factory installed "Carbon-Flash" decal(?)!
_
Now, here is my problem with this decal; I have purchased one from "Trunk-Monkey" and I am not sure how to apply it or even if it is what I was told it was by the sells person. It has no instuctions with it and appears to be one large decal with the "silver-gray" skull on a "black back-ground", all one decal. My car already has the black "Carbon-Flash" stinger on it from the factory and all I wanted was to be able to apply just the "gray skull" part onto my existing black "Carbon-Flash" stinger and NOT cover the whole stinger with another decal. If I am correct about this decal it would work OK for someone who had no stinger color other than the cars body color(?)! I was told by the sells person (I placed an online order after calling and asking this very question for clarification) that the decal would apply the way I was wanting (skull only); however, it appears to be one large decal with the gray-skull and black-back ground all one application. I do not want to cover my whole existing black (Carbon-Flash) stinger with a decal. My understanding is that the original black "Carbon-Flash" stinger is actually already a decal itself.
I am apprehensive about starting to apply this decal until I fully understand what I have here (No Instruction or description of application procedure included)! I know that it is basically a peel and stick decal, but it would help if there were a few suggestions as to how to proceed with this install. However, again, my present concern is what constitutes the whole of the decal(??)!
Have I been clear here with my explanation of what I expected to get out of this application or am I making it even worse for your understanding of my concern.
BTW, what does your last comment, "This graphic will disappear if you place it over your current decal." actually mean??
I have the feeling that you may have answered my primary concern with that statement, but want further clarification. I
am afraid you are indeed telling me that this decal will cover entirely my current factory installed "Carbon-Flash" decal(?)!
_
My last comment deciphered:
If you already have the carbon flash hood stinger, and you want to lay the Carbon flash Jake skull logo on top of that, then the skull will not be very visible unlike the one you see on this white Stingray.
This decal will separate so you have the underneath exposed through. It is sold as one piece to ensure resiliency.
As far as installation, you could give us a call, or talk to any body shop, etc for advice
I apologize for it not being provided with install instructions.
Last edited by subchev; 01-15-2016 at 08:21 PM.
#20
Racer
My last comment deciphered:
If you already have the carbon flash hood stinger, and you want to lay the Carbon flash Jake skull logo on top of that, then the skull will not be very visible unlike the one you see on this white Stingray.
Exactly what I want! A very sutle and not that noticeable a look until one is right upon the car. I do not like the strong contrast between the "Black/White" decal. The "gray-on-black" (sometimes appearing as "silver-on-black" depending on the light's angle) is fine.
This decal will separate so you have the underneath exposed through. It is sold as one piece to ensure resiliency.
The "underneath" being my original "carbon-flash" hood stinger? The black part of the decal has no adhesive backing??
As far as installation, you could give us a call, or talk to any body shop, etc for advice, I apologize for it not being provided with install instructions.
No apology necessary, if Chevrolet didn't supply some suggestions of how to best install the decal, then...?? I will take it to a good place I know of that does window-tint and the Xpel body-covering. They should be able to better understand the installation and any tricks needed.
If you already have the carbon flash hood stinger, and you want to lay the Carbon flash Jake skull logo on top of that, then the skull will not be very visible unlike the one you see on this white Stingray.
Exactly what I want! A very sutle and not that noticeable a look until one is right upon the car. I do not like the strong contrast between the "Black/White" decal. The "gray-on-black" (sometimes appearing as "silver-on-black" depending on the light's angle) is fine.
This decal will separate so you have the underneath exposed through. It is sold as one piece to ensure resiliency.
The "underneath" being my original "carbon-flash" hood stinger? The black part of the decal has no adhesive backing??
As far as installation, you could give us a call, or talk to any body shop, etc for advice, I apologize for it not being provided with install instructions.
No apology necessary, if Chevrolet didn't supply some suggestions of how to best install the decal, then...?? I will take it to a good place I know of that does window-tint and the Xpel body-covering. They should be able to better understand the installation and any tricks needed.
Last edited by Sk8Man_; 01-15-2016 at 11:54 PM.