NORCAL SS C7 Z06 Gauge. 1 gauge does it all.
#1
Former Vendor
Thread Starter
NORCAL SS C7 Z06 Gauge. 1 gauge does it all.
After months of working on the programming its finally ready and comes with the install bracket. I wanted to make a oem looking set up since I really dont want to see a gauge on my dash or pillar
Heres the order link $289 SHIPPED WITH BEZEL
http://c7z06owners.com/store/norcal-...tom-gauge.html
This gauge is a bolt in deal monitors a lot of the cars points and even has a option of the alcohol percentage for e85 users. Best of all you can turn on the intercooler pump to cool down the blower when car is off and it shows IAT 1 TEMP as well as the IAT 2 TEMP as well. I also offer a wideband kit for it with a bosch sensor so that is another plus. I can do the gauge digital display in red/blue/green also.
As for gauge finish options. I can offer a carbon fiber background and ring as well as a black ring and a black line machine face ring as pictured below. The bracket that holds it in the cubby hole presses right in and holds is snug and powdercoated black. You will just need to make a small hole on top of the cubby which is hidden to run thru the wire.
Any questions feel free to ask im around 24/7
for install you will need to take parts of the dash apart which is no big issue and can be seen here
Heres the order link $289 SHIPPED WITH BEZEL
http://c7z06owners.com/store/norcal-...tom-gauge.html
This gauge is a bolt in deal monitors a lot of the cars points and even has a option of the alcohol percentage for e85 users. Best of all you can turn on the intercooler pump to cool down the blower when car is off and it shows IAT 1 TEMP as well as the IAT 2 TEMP as well. I also offer a wideband kit for it with a bosch sensor so that is another plus. I can do the gauge digital display in red/blue/green also.
As for gauge finish options. I can offer a carbon fiber background and ring as well as a black ring and a black line machine face ring as pictured below. The bracket that holds it in the cubby hole presses right in and holds is snug and powdercoated black. You will just need to make a small hole on top of the cubby which is hidden to run thru the wire.
Any questions feel free to ask im around 24/7
for install you will need to take parts of the dash apart which is no big issue and can be seen here
Last edited by NORCAL-SS; 01-31-2018 at 05:01 PM.
The following users liked this post:
Mikec7z (03-14-2019)
#3
Former Vendor
Thread Starter
It plugs into obd port. Pops right out if dealer needs to scan ecu or doing a tune. Also the wideband can be hooked up to hp tuners or efi live
#5
Former Vendor
Thread Starter
I've been getting great feedback so far. Sitting in the lanes and being able to turn on the intercooler pump is a major benefit.
#7
Former Vendor
Thread Starter
pod on coulum would block cluster to much already tried that. plus the gauge can record your run and has leds that flash when your parameter setting goes higher or lower than what you set it to. no missing that
The following users liked this post:
DRLC5 (03-18-2016)
The following users liked this post:
SpeedyD (09-22-2016)
#11
Former Vendor
Thread Starter
Also can pop up the red leds whwn you set a parameter like If iats get warm or shift light
Last edited by NORCAL-SS; 03-22-2016 at 12:12 AM.
#14
Since you're able to pull both IAT1 and IAT2 can you see which value the Aim Solo is pulling for IAT? Since you can't run both at once I guess you'd have to switch which is plugged in to the OBD II and compare values.
BTW, looks like your domain expired so the order site isn't available.
BTW, looks like your domain expired so the order site isn't available.
#16
Racer
Had these on in my 04 GTO .. i had the dual thou. They were awesome.. Love that someone has made them work with the Z06.. thumbs up sir!!!
As soon as my mod bug hits me I will be ordering these. Any chance of the dual working on these cars?
As soon as my mod bug hits me I will be ordering these. Any chance of the dual working on these cars?
#18
Former Vendor
Thread Starter
warmer days coming up. For those that drag race my set up can turn on the IC pump to cool the car down when in staging lanes WITHOUT the car having to be turned on.