Who has the highest horsepower Z06 w/stock blower
#101
Thats complete BS.... Their dyno is happy as hell or they have a lot more in there then they are saying.
My buddy just finished his C7Z M7 last week.... CNC ported heads/cam, FULLY ported blower/snout, 2.31/18% pullies, fuel system, dual nozzle meth and E79, 2" headers and full exhaust. Made 786rwhp/832tq, and it took a lot of effort to even get it that high.
The blower is DONE...
No way they are making over 730-740 without a cam on a stock blower (ported) car.....
My buddy just finished his C7Z M7 last week.... CNC ported heads/cam, FULLY ported blower/snout, 2.31/18% pullies, fuel system, dual nozzle meth and E79, 2" headers and full exhaust. Made 786rwhp/832tq, and it took a lot of effort to even get it that high.
The blower is DONE...
No way they are making over 730-740 without a cam on a stock blower (ported) car.....
thats some sick numbers your friend has like to see that run the 1/4
since then blower is maxed at those numbers which is great numbers for the LT4 blower everyone says don't do 2.31 upper and 18%• lower
#102
Streetspeeds build is FBO, heads, cam, all fasterpoms stuff (ported blower, tb, snout, 2.31 upper ) halltech cai, kooks 2", innovators west 9% lower. 770whp 799tq no meth no e85. He was tuned by Jeremy last time and I think he plans to again so we'll be getting new numbers soon. Diablo formula is an honest guy I don't think he's lie. Hell he did my car just headers and cai and I'm making 622hp 631tq, I don't think his numbers with that entire build is unreasonable.
#103
He has videos of his entire build since day one, always has been honest with dyno numbers even when he wasn't happy with them last time he was there. To the guy who said about the 2.31 upper and 18% lower I've never seen someone do that, it's my understanding the 9% lower is the most you can do if you already have a 2.31 upper but I may be wrong.
Streetspeeds build is FBO, heads, cam, all fasterpoms stuff (ported blower, tb, snout, 2.31 upper ) halltech cai, kooks 2", innovators west 9% lower. 770whp 799tq no meth no e85. He was tuned by Jeremy last time and I think he plans to again so we'll be getting new numbers soon. Diablo formula is an honest guy I don't think he's lie. Hell he did my car just headers and cai and I'm making 622hp 631tq, I don't think his numbers with that entire build is unreasonable.
Streetspeeds build is FBO, heads, cam, all fasterpoms stuff (ported blower, tb, snout, 2.31 upper ) halltech cai, kooks 2", innovators west 9% lower. 770whp 799tq no meth no e85. He was tuned by Jeremy last time and I think he plans to again so we'll be getting new numbers soon. Diablo formula is an honest guy I don't think he's lie. Hell he did my car just headers and cai and I'm making 622hp 631tq, I don't think his numbers with that entire build is unreasonable.
#104
Drifting
He posted in wrong forum, but the tuner has spoken
#105
https://www.corvetteforum.com/forums...p-numbers.html
He posted in wrong forum, but the tuner has spoken
He posted in wrong forum, but the tuner has spoken
#106
Late Model Domestics
Well mine is going under the knife on 4/7 at Katech with the intention of maximizing HP with Stock Supercharger!
It currently is 580RWHP 597RWTQ with Halltech, Ported TB, Ported Heads and Akropovic Evolution exhaust!
Katech will install the following:
LPE 35GT 35 Cam
LPE Injectors
LPE Pump
GM Racing Lifters & Katech Valvetrain
Supercharger Pulley
Balancer Pulley
2"ARH Headers connected to Akropovic XPipe ( Weight Reduction)
Katech E85 Fuel System (Running 100% E85)
Katech Oil Cooler
Dewitt's Radiator
DSC Sport Suspension Controller
Tuned to Full E85 / 106 Racing Gas
Hoping for 800RWHP
Wanted to add TIKT system but too pricey and install time right now.
MORE TO FOLLOW
It currently is 580RWHP 597RWTQ with Halltech, Ported TB, Ported Heads and Akropovic Evolution exhaust!
Katech will install the following:
LPE 35GT 35 Cam
LPE Injectors
LPE Pump
GM Racing Lifters & Katech Valvetrain
Supercharger Pulley
Balancer Pulley
2"ARH Headers connected to Akropovic XPipe ( Weight Reduction)
Katech E85 Fuel System (Running 100% E85)
Katech Oil Cooler
Dewitt's Radiator
DSC Sport Suspension Controller
Tuned to Full E85 / 106 Racing Gas
Hoping for 800RWHP
Wanted to add TIKT system but too pricey and install time right now.
MORE TO FOLLOW
Last edited by mariofromnewyork; 07-22-2017 at 04:43 PM.
#107
Mine ended up 704 RWHP and 725 RWTQ with an A8 !
Still need to have SC Ported and 103mm Throttle Body.
Also needs to be fine tuned! It is only tuned for E85 and the injectors are a problem right now.
It sounds like a "Bear With A sore ***"...lol
It was too loud to run at M1 Concourse as I was asked to leave as it registered 105DBA.
Still need to have SC Ported and 103mm Throttle Body.
Also needs to be fine tuned! It is only tuned for E85 and the injectors are a problem right now.
It sounds like a "Bear With A sore ***"...lol
It was too loud to run at M1 Concourse as I was asked to leave as it registered 105DBA.
#108
Drifting
Guy on here with a lower and xpipe with spray making 820/850 ...
#109
Supporting Vendor
I posted, it's so full of crap.
#110
#112
Drifting
#113
Le Mans Master
Thread Starter
time to wake this thread back up!!!
#115
Le Mans Master
Thread Starter
#118
#120
The following users liked this post:
SharkbyteLT4 (02-10-2018)