MTI F1R Makes 894hp at 13 psi!!!!
#1
Former Vendor
Thread Starter
MTI F1R Makes 894hp at 13 psi!!!!
This is our customer Gary's 2016 Z06. Car came to us with 100 miles on the clock. Gary went with our MTI custom spec camshaft kit, Procharger F1-R, and an Alky Control system. Car made 870hp at only 13psi on 91 octane and 894hp on 100 octane!!!
#4
Drifting
Dynos with RPM rather than speed?
#6
A few supporting mods and a few PSI and rwhp goes up 80%? Was a plug wire off on the base line or was N02 used on the 2nd pull?
I'm not saying I DONT BELIEVE YOU but .....wow
I'm not saying I DONT BELIEVE YOU but .....wow
The following users liked this post:
Billy@MTI (01-03-2017)
#8
Former Vendor
Thread Starter
We see these cars make 500 to 530 stock and warmed up. Nothing but boost was used. You guys have to understand how IATs effect power. The Procharger Intercooler is HUGE!!! The IATs only raise to about 10 deg. higher than ambient outside temp unlike the LT4 blower which is very high.