Go Back  CorvetteForum - Chevrolet Corvette Forum Discussion > C7 Corvette > C7 Z06 Discussion
Reload this Page >

I take it an oil cooler didn't solve overheating?

Notices
C7 Z06 Discussion General Z06 Corvette Discussion, LT4 Corvette Technical Info, Performance Upgrades, Suspension Setup for Street or Track
Sponsored by:
Sponsored by:

I take it an oil cooler didn't solve overheating?

 
Old 11-19-2018, 09:45 PM
  #41  
GSpeed
Supporting Vendor
 
GSpeed's Avatar
 
Member Since: Dec 2015
Location: Cresson TX
Posts: 813
Thanked 378 Times in 214 Posts
Default

Originally Posted by Mikec7z View Post
its the best bang for the buck if configured correctly. But I am scared to get into this topic, as last time I did, since my opinion was different than a vendor's at that time, and neither of us would back down, I lost. PM me and we will talk.
Originally Posted by Mikec7z View Post
I will give you credit Tom, while you and I had a big debate, it was not you who caused me the pain, it was another vendor who started swinging on me in another thread not even a day later.

I wanted to write this so that you and others knew that I was not complaining about you. Thank you for your assistance to the community and understanding debates will occur and being able to take back in what you dish out, like an adult without throwing a fit to the forum moderators, you are a good man.


We are happy to debate. But you didnt debate. Its also hard to argue with facts, which you had none of. However, what you did have was a lot of personal threats that got old. Please dont go down that road again, and lets all work on making these cars better.
__________________

"Keeping You on Track!"
http://www.gspeed.com
877-512-5180

Instagram_Facebook_YouTube

GSpeed C7Z Cooling Development

2018 NASA TTU & TT3 National Champions
GSpeed is offline  
The Following 2 Users Say Thank You to GSpeed For This Useful Post:
3 Z06ZR1 (11-19-2018), LagunaSecaZ06 (11-20-2018)
Old 11-19-2018, 10:12 PM
  #42  
Mikec7z
CF Senior Member
 
Mikec7z's Avatar
 
Member Since: Mar 2018
Posts: 1,612
Thanked 259 Times in 208 Posts
Default

if you didn't want to go down that road again, why would you post that message?

I don't need an answer, and that will be the last i speak to you. I tried to help your father. Next thing you know, you are saying you are your father.. .which is against forum rules for someone to be on someone else's account. So if you were telling the truth or not is of no concern to me. All i know is the post where you said you were your father, vanished.

You were insulting me saying im nothing but a freight forwarder... remember?

And i said, the only reason you knew that was because I tried to assist your father when there was nothing in it for me? So since i have connections at ports... and was trying to help a stranger (your dad) that means my life career is a freight forwarder?

That's when i brought up your dad, asking if he is the one who gave you the bad info that freight forwarding is my ultimate profession based on the reality i had connections at the ports.... and you said you were your dad...

And then, poof, im banned, and your message calling me a clueless freight forwarder is erased.... so is the one where you said you were your dad.

But the good news is, we have screen shots of the convo. And the better news is, i think a documentary about this place might be coming out soon, and how the drama prohibits solutions and ideas from coming to fruition. Everything from keeping cars cool, to preventing limp modes that might kill people at high speed in the cold weather.

One of the other banned members who everyone said was wrong about the 150mph limp mode, and owns a few chevy stores... he is the one making it

Should be a big hit on youtube and jalopnik

That will be my last message to you... so go ahead and make the next one great... get under my skin as best as you can.

Screen shots will tell the real story... soon enough.

Last edited by Mikec7z; 11-19-2018 at 10:31 PM.
Mikec7z is offline  
Old 11-19-2018, 10:21 PM
  #43  
fleming23
CF Senior Member
 
fleming23's Avatar
 
Member Since: Feb 2009
Location: Dallas Georgia
Posts: 2,596
Thanked 495 Times in 352 Posts
Default

Werenít you going to design a cooling system that was going to make all the forum vendors/sponsors look like idiots? Still waiting on that development. Your hands arenít exactly clean here.
fleming23 is offline  
The Following 2 Users Say Thank You to fleming23 For This Useful Post:
AZGASSER (11-19-2018), Mikec7z (11-19-2018)
Old 11-19-2018, 10:24 PM
  #44  
Mikec7z
CF Senior Member
 
Mikec7z's Avatar
 
Member Since: Mar 2018
Posts: 1,612
Thanked 259 Times in 208 Posts
Default

i am still waiting on my new vette, and i cant alter this one.

all the vendors have the ability to test my ideas. And rumor has it, they have, and with good results.

Ironically, there is nothing about chin coolers facing forward into the air yet on this forum, even tho good sources say that certain vendors HAVE done it since my battle with them. (odd why they wouldnt post the results.. i mean... if they were bad... post them right? And if they are good... help the community, right?)

But, just media blackout so far on the chin coolers that face forward and are properly aligned to cool optimally.

Oh well, i guess that means i get to be first to prove it still

Last edited by Mikec7z; 11-19-2018 at 10:45 PM.
Mikec7z is offline  

Thread Tools
Search this Thread
Quick Reply: I take it an oil cooler didn't solve overheating?


Sponsored Ads
Vendor Directory

Contact Us - About Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
 
  • Ask a Question
    Get answers from community experts
Question Title:
Description:
Your question will be posted in: