[ARTWORK INSIDE!] jagamajajaran's CUSTOM C7 Grand Sport RENDERING!
#1
Supporting Vendor
Thread Starter
[ARTWORK INSIDE!] jagamajajaran's CUSTOM C7 Grand Sport RENDERING!
Hello Corvette Forum! Brian from Monaco Auto Design...back at it again with another rendering, this time with agamajajaran's C7 Grand Sport!
What you're looking at here is a personalized artistic rendering of Jeremy's Corvette that reflects the EXACT specification such as model, trim level, color, wheel, wheel finish, all custom modifications, interior color, seat style, caliper color, etc, etc. Every detail has been captured to best reflect the vehicle. Once completed, I supplied Jeremy with a high-quality file for him to take to any printing service so he can have it framed and hung on his wall! Check it out!
For more information about how to get one of your own, feel free to send over a PM or email at monacoautodesign@gmail.com! I've included some FAQs below that might help, but please don't hesitate to send over any questions.
-----
Final Rendering:
Here's a photo of Jeremy's C7 Grand Sport:
This is actually the 2nd rendering I've done for Jeremy, check this one out of his C7 Stingray I did a little while back...
-----
How are these created?
Custom templates are created which are then modified to match your vehicle’s exact specification. Upon completion, I send you a high resolution print-ready file which you can then have printed.
What do you need from me?
- 2 to 3 images of your vehicle. The images you provide are NOT used in the rendering, and are ONLY used for reference.
- Choose either a front 3/4 or rear 3/4 angle (OR BOTH!) for your rendering(s). Custom templates for different angles are available at an additional charge.
- (Optional) Full Name & VIN number to be included in the ‘plaque’ within the rendering
How much does this cost?
Renderings are $100 each, and can vary slightly depending on additional vehicle modifications and/or special requests such as backgrounds and other personalizations.
Can I print my rendering to hang on my wall? If so, how big?
Yes! The recommended print size for a rendering is 17” x 11”. You may go slightly bigger, but I usually warn against going too big as to not compromise the overall print quality.
How long does it take?
Currently, turn around time is about 1 to 2 weeks.
I went to your website, and I’m still confused. Is this the only service you offer?
This is one of many automotive rendering services I offer. Other services include Personal design consulting, Body & Cosmetic design, Photo editing, Vector artwork, Marketing & Promotional material, Logos & Branding. I invite you to check out my website at www.monacoautodesign.com to see my latest projects.
Thanks!
-Brian
What you're looking at here is a personalized artistic rendering of Jeremy's Corvette that reflects the EXACT specification such as model, trim level, color, wheel, wheel finish, all custom modifications, interior color, seat style, caliper color, etc, etc. Every detail has been captured to best reflect the vehicle. Once completed, I supplied Jeremy with a high-quality file for him to take to any printing service so he can have it framed and hung on his wall! Check it out!
For more information about how to get one of your own, feel free to send over a PM or email at monacoautodesign@gmail.com! I've included some FAQs below that might help, but please don't hesitate to send over any questions.
-----
Final Rendering:
Here's a photo of Jeremy's C7 Grand Sport:
This is actually the 2nd rendering I've done for Jeremy, check this one out of his C7 Stingray I did a little while back...
-----
How are these created?
Custom templates are created which are then modified to match your vehicle’s exact specification. Upon completion, I send you a high resolution print-ready file which you can then have printed.
What do you need from me?
- 2 to 3 images of your vehicle. The images you provide are NOT used in the rendering, and are ONLY used for reference.
- Choose either a front 3/4 or rear 3/4 angle (OR BOTH!) for your rendering(s). Custom templates for different angles are available at an additional charge.
- (Optional) Full Name & VIN number to be included in the ‘plaque’ within the rendering
How much does this cost?
Renderings are $100 each, and can vary slightly depending on additional vehicle modifications and/or special requests such as backgrounds and other personalizations.
Can I print my rendering to hang on my wall? If so, how big?
Yes! The recommended print size for a rendering is 17” x 11”. You may go slightly bigger, but I usually warn against going too big as to not compromise the overall print quality.
How long does it take?
Currently, turn around time is about 1 to 2 weeks.
I went to your website, and I’m still confused. Is this the only service you offer?
This is one of many automotive rendering services I offer. Other services include Personal design consulting, Body & Cosmetic design, Photo editing, Vector artwork, Marketing & Promotional material, Logos & Branding. I invite you to check out my website at www.monacoautodesign.com to see my latest projects.
Thanks!
-Brian
__________________
Monaco Auto Design
Automotive rendering & design
www.monacoautodesign.com
Instagram - @monacoautodesign
Facebook - www.facebook.com/monacoautodesign
YouTube - https://www.youtube.com/channel/UCmt...7-VxqqaF5CSNJQ
Monaco Auto Design
Automotive rendering & design
www.monacoautodesign.com
Instagram - @monacoautodesign
Facebook - www.facebook.com/monacoautodesign
YouTube - https://www.youtube.com/channel/UCmt...7-VxqqaF5CSNJQ
#2
Nice color combo jaga!
#3
Le Mans Master
Pretty cool
The following users liked this post:
Monaco Auto Design (07-14-2017)
#4
Supporting Vendor
Thread Starter
#5
Team Owner
Member Since: Oct 2013
Location: Kansas City, Missouri
Posts: 25,350
Received 7,752 Likes
on
4,181 Posts
CORVETTE TODAY Host
St. Jude Donor'15
Both of Jeremy's cars look great.
The following users liked this post:
Monaco Auto Design (07-15-2017)
#8
Supporting Vendor
Thread Starter