Maggie 2650R Valve Covers?
#1
Pro
Thread Starter
Maggie 2650R Valve Covers?
Good Afternoon family. I am planning on upgrading my supercharger soon to the Magnuson 2650R. From my understanding the valve covers need to be either modified or replaced. What are most people doing? If you are replacing your valve covers, what brand are you using?
#2
Drifting
Speed Engineering
Last edited by JasonVette; 05-13-2021 at 02:49 PM.
The following users liked this post:
NortonCO (05-15-2021)
The following 2 users liked this post by Kouasupra:
djyankees31 (05-15-2021),
NortonCO (05-15-2021)
#5
Drifting
#6
Check out our new covers:
https://www.corvetteforum.com/forums...ve-covers.html
We are about to get 100% confirmation with the TVS2650 shortly, but I'm very confident they will work.
https://www.corvetteforum.com/forums...ve-covers.html
We are about to get 100% confirmation with the TVS2650 shortly, but I'm very confident they will work.
The following 3 users liked this post by Harding_Performance:
The following 2 users liked this post by 2ZORNOT2Z:
-ZEEOHSIX- (05-22-2021),
Harding_Performance (05-14-2021)
#9
Instructor
Late Model Engines Has A nice billet set also For 2650 version also black or plain.
The following users liked this post:
NortonCO (05-15-2021)
#11
Melting Slicks
The Speed Engineering is what I ran on my 16 Camaro with 2650. The Hardings look pretty awesome also.
Last edited by 99vetteran; 05-14-2021 at 10:58 PM.
The following users liked this post:
Harding_Performance (05-15-2021)
The following users liked this post:
Harding_Performance (05-15-2021)
The following 3 users liked this post by Harding_Performance:
The following users liked this post:
Harding_Performance (05-22-2021)
#15
Thank you very much. We put a lot of effort into the design and manufacturing. Also, they are machined right here in Michigan!
The following users liked this post:
Harding_Performance (05-25-2021)
#17
Melting Slicks
Before I bought my Speed Engineering I ran the modified stock valve covers. Pretty easy fix and explained in the Magnuson instructions and basically it just removing some of the coil bolt mounts and a bracket that moves the coils down a couple inches.