Swapped wheels to larger size.. car handles bad! is there calibration needed?
01-21-2018, 01:01 PM
#21
Team Owner
01-21-2018, 05:29 PM
#22
Safety Car
Stock tires are 25.8 in in diameter up front and 26.6 in in diameter in back.
You could get a 285/25/20 and that would be about right up front (about 25.6). Rather than the 27 inch diameter you have. Maybe a 325/25/21 would work out back. That would be larger but still only 27.4 in in diameter.
Check with Gerry at CW4L. I know he has done dozens of 20/21s on the Zs both C6 and C7. He likely can tell you off the top of his head if your sizes should work.
You could get a 285/25/20 and that would be about right up front (about 25.6). Rather than the 27 inch diameter you have. Maybe a 325/25/21 would work out back. That would be larger but still only 27.4 in in diameter.
Check with Gerry at CW4L. I know he has done dozens of 20/21s on the Zs both C6 and C7. He likely can tell you off the top of his head if your sizes should work.
The following users liked this post:
CW4L (01-23-2018)
The following users liked this post:
CW4L (01-23-2018)
01-21-2018, 09:00 PM
#26
CF Senior Member
