Introducing Signature SV502 Black Series forged monoblock: lighter track specs!
#41
Melting Slicks
What was the exact weight on the 20x12.5?
#42
Melting Slicks
Are the 501 and 502 the same weight? Also what does gunmetal look like? Thank you!
The following users liked this post:
Deity.Motorsports (03-06-2018)
The following users liked this post:
Z06Norway (03-07-2018)
#48
Melting Slicks
Member Since: Nov 2000
Location: Merritt Island Florida
Posts: 2,225
Received 241 Likes
on
145 Posts
I am flying over to Fort Lauderdale april 5th, really hope they have arrived by then so i can stick new tires on them and test them out :-)
regards
Rune
The following users liked this post:
Z06Norway (03-07-2018)
The following users liked this post:
cvp33 (03-13-2018)
#53
Former Vendor
Thread Starter
Member Since: Sep 2016
Location: Westminster California
Posts: 2,557
Received 329 Likes
on
225 Posts
Can you text me a price please waiting for you to get back to us to make sure we can track these buddy. Text a price for 1 wheel at 440-915-6166 with all the tracking we do need to have these fully tested to make sure. We will pay for and run full testing including load rating and impact testing and provide for all on the forum and if all is great we can get a few sets!!
We here at Signature are not looking for dealers. Secondly, you personally bashed my own products since day one, even reached out to me on Instagram to do so. I don’t think it’s a good idea since you are a big time dealer for a very popular wheel company in the Corvette World.
We are doing just fine without dealers. Cut down cost onto customers.
VIA and JWL certification to all of our designs plus even big time Ford Performance Racing School ordered and reordered a second batch from us. That should do it plenty of justice for our inmate. Plenty of guys on here with extensive track record can speak for the quality of my products.
With that said, you are welcomed to buy a set to check us out.
The following users liked this post:
cvp33 (03-13-2018)
#54
As a Signiture SV501 user, I would like to share some my own experience with those wheels. since I live down south Florida, so the track that I visited the most is Sebring, also as known as the bumppiest track in the whole country, I’ve ran around 10 days on these wheels and 9 of them are in Sebring. They are hold themselves fine, besides minor rock chips from track, they have been doing their best to keep my car running fast around Sebring (2:16 on stock power level car is pretty fast) I’m on pirlli slicks, so they are pretty rough on wheels as the grip level is really high. and I believe if anything happens to them I’ll be take care of by signature as part of their structure warranty.
I do have some experience with forgeline wheels, only had a set on my Gen 5 Camaro SS. I believe the style was GA3R, 3 piece open lug wheels, I used them on continental slicks that come off the World Challenge cars. Worked well for about a year, then had one crack on the LF face of the wheel, eventually I had it fixed and sold locally, but I don’t think they work very well on heavy cars.
Frank
I do have some experience with forgeline wheels, only had a set on my Gen 5 Camaro SS. I believe the style was GA3R, 3 piece open lug wheels, I used them on continental slicks that come off the World Challenge cars. Worked well for about a year, then had one crack on the LF face of the wheel, eventually I had it fixed and sold locally, but I don’t think they work very well on heavy cars.
Frank
The following users liked this post:
Deity.Motorsports (03-13-2018)
#55
I can also speak for Signature Wheels
I have great experience with Signature Wheels on the track, even the finish held up to my glowing rotors on this track day in club motorsports in NH.
The following users liked this post:
Deity.Motorsports (03-13-2018)
#56
Le Mans Master
I use my signature wheels on the track running over FIA curbing all the time. No problems.
The following users liked this post:
Deity.Motorsports (03-13-2018)
The following users liked this post:
Deity.Motorsports (03-13-2018)
The following users liked this post:
Deity.Motorsports (03-13-2018)