When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
★STOP Rock Chips! Protect Your Paint! - Cleartastic DIY Kits - FREE S&H!!
The Number#1 Do-It-Yourself Automotive Protection Kits Since 1996!
Right now FREE Shipping & Handling on All Kits! (Lower 48) Plus we have added some new "Combo Kits" to also help you save!
Unfortunately there are areas on your Stingray, GS and Z06 that are vulnerable to getting hit & peppered by rocks and road debris.
You will absolutely get nicks & paint chips in a matter of time.
The only way to prevent it, is by protecting these area's directly. Cleartastic® DIY invisible pre cut film kits protect those vulnerable areas without changing the look of your ride.
Cleartastic® Plus+ is a clear flexible film that creates an invisible barrier between your beautiful delicate paint and rocks & debris.
The kits are pre cut to fit perfect. Since 1996 we have been personally designing our kits so the enthusiast with no experience gets professional results! The other benefit is, since you apply it yourself you don't have to drive to another venue and have a stranger all over your car! Our kits save you time, money, stress and of course your paint!.
★Tough as nails yet extremely flexible which allows for an easy install.
★ "Self healing" characteristics so small marks & scratches will vanish over time!
★ Superior optical clarity. Goes on crystal clear to create an invisible barrier and allow your beautiful paint to come through.
★ Extremely tough to withstand rocks, road debris and human abuse.
★ Treat it like your Paint. Wax & Wash Right over it!
Cleartastic® 15-19 Upper Rear Fender Kit 96-CP
Talk about an area that gets beat up! This flared body fender looks great on the car but unfortunately sticks out and is vulnerable to getting peppered with chips. Protects above the brake duct and back.
Your GS & Z06 comes with very little protection film from the factory. There's so much still exposed including the painted brake duct edge! You WILL get chips around the factory film!
Our kit Provides FULL protection. Seam to seam. Plus a portion under the door!
Cleartastic® 14-19 Stingray Lower Rocker, Front of Rear Wheel, Lower Door-KIT 95-CP
Your Stingray comes with very little protection film from the factory. Only half of the panel is protected! You WILL get chips around the factory film! Our Kit Provides FULL protection. Seam to Seam. Plus the lower door.
Cleartastic® 14-19 Stingray Behind Front And Rear Wheels 90-CP
Those massive tires sling back a lot of rocks. This kit protects the paint behind all tires.
Thank you for checking out our thread! Feel free to contact us toll free1800 778 9898 - Mon thru Friday 9:00-4:30 est
__________________ Number 1 "Do It Yourself" Protection Kits Since 1996
*Serving The Corvette Forum Members For20 Years!
*Invisible Once Applied
*Tough As Nails Protection
*Saves You Time, Money & Of Course Your Paint
*Proudly Made In The USA CHECK OUT OUR NEW WEBSITE!http://www.cleartastic.com
Last edited by Cleartastic; 07-17-2018 at 12:39 PM.
I installed the Cleartastic kit on my C7 and it came out great. I'd never done anything like that before and it really wasn't that difficult.
Originally Posted by MontanaZR1
Product is great, next to unnoticeable and easy to install.
Originally Posted by TXshaggy
….. Went with the cleartastic product and couldn’t be happier.
2016 Z07 with full side skirts and gm splash guards front/rear
Originally Posted by John Micheal Henry
My rocker kit installed very easy. Hardest part was pulling the factory plastic off. This kit offers better coverage that the factory….
… Looks great and I can't really tell where the edges are on my LRG.. Thanks for a great product
Originally Posted by ArcsandSparks, post: 2335265, member: 34421
Installed mine a few days ago and I have nothing but good things to say. Applying the film is simple, and the fit & finish is great……
Originally Posted by My11thVette
This product gets the job done. Support our small business vendor, Ed is a great guy and does not release a kit unless it is perfect. Very simple to install if you follow the directions. I have bought 4 kits from TKO and it was money well spent.
Originally Posted by SharkbyteLT4
I had them on when I first got my Z. you can't beat the protection for under hundred bucks. The area behind the front wheels was a bitch to put on while the rest was a piece of cake.
Originally Posted by enventr
I met some people at corvette car shows that had their entire car covered with this product. It looked great and I could not tell it was on.
Originally Posted by conlaurant
Great product, EZ install. Imperfections (from a novice installer like myself) usually disappear after curing as well as being in the sun..... Used it on my C6
Originally Posted by BERETTA
I have used their products and I like them. I just put on a set of the rear quarter panel pieces and they turned out good and provide protection where you need it.
Originally Posted by LGK-SD
Only kit I got from ClearTastic is the one for the leading area of the rear fender area just behind the doors. They were cut perfect and went on like they said they would..... .......Gotta see what other cars they make products for.
Originally Posted by Strake
….. Easy to get ahold of, and the kind of company any of us would like to buy from.
I have installed these kits on 4 C7s and 2 C6. They are a great source of protection. The vendor is 1st class and very picky about what he sells. We used my 16 Z06 for the prototype and spent months getting it perfect. Ed Gentile is the owner of TKO and is easily accessible by phone. If you follow his instructions, work in a clean environment and have a bit of patience, you will love the outcome. Just my 2 cents.
All orders from 4/4 forward have shipped! Tracking numbers have been emailed.
PS, please don't use "P.O Box's" for the address. Fed ex will NOT deliever there. Need Physical address's
Thank you for your business!
Originally Posted by tadehz51
Any solution to the hood and front bumper?
Not yet. I have one in the making. We have to deal with and overcome the compound curves and angles so its easy for anyone to apply. We won't release it until that's accomplished.
Anyone who had installed these before can you give me some input on how difficult it is?
For over 20 years, we have designed these kits for people with no experience applying film. After we are done creating a kit, we typically send it out to a random Corvette Forum member to test & get feedback.
We have also been a sponsor here on the forum for many years. If the product was hard to apply or did not live up to its #1 DIY status, you would have heard about it
Grabbed these C7 posts...
Originally Posted by 7LitreC5
I installed the Cleartastic kit on my C7 and it came out great. I'd never done anything like that before and it really wasn't that difficult.
Originally Posted by My11thVette
I have installed these kits on 4 C7s and 2 C6. They are a great source of protection. The vendor is 1st class and very picky about what he sells. We used my 16 Z06 for the prototype and spent months getting it perfect. Ed Gentile is the owner of TKO and is easily accessible by phone. If you follow his instructions, work in a clean environment and have a bit of patience, you will love the outcome. Just my 2 cents.
Originally Posted by LGK-SD
Only kit I got from ClearTastic is the one for the leading area of the rear fender area just behind the doors. They were cut perfect and went on like they said they would......
.....Gotta see what other cars they make products for.
If any one has any questions, please feel free to contact us!
Last edited by Cleartastic; 04-08-2018 at 01:46 PM.
For over 20 years, we have designed these kits for people with no experience applying film. After we are done creating a kit, we typically send it out to a random Corvette Forum member to test & get feedback.
We have also been a sponsor here on the forum for many years. If the product was hard to apply or did not live up to its #1 DIY status, you would have heard about it
Grabbed these C7 posts...
If any one has any questions, please feel free to contact us!
I'm looking for information on how they are installed.
I'm looking for information on how they are installed.
The car is prepared like most other films. Wash the area. Use a isopropyl alcohol to wipe down the surface where the film will be applied.
The application is not as complicated as other films. Simply spray the slip solution on the surface and the film, Apply the piece. The cut will have the piece basically fall into place.
Squeegee out the excess water. Let it dry. What's nice is if there are any slight imperfections, they will disappear over time with a the car a few days in the sun.
I'd rather talk then type so for any other questions feel free to contact us direct by phone 1800 778 9898.
CT, My rocker kit installed very easy. Hardest part was pulling the factory plastic off. This kit offers better coverage that the factory. I wish you guys would offer a kit for the rest of the rocker and below the rocker where the factory plastic is applied. Looks great and I can't really tell where the edges are on my LRG.. Thanks for a great product
Thank you for the orders. I apologize for the delay. We are getting them out asap! If you have any questions about the kits, please feel free to contact us!
03-22-2018, 01:28 PM
★STOP Rock Chips! Protect Your Paint! - Cleartastic DIY Kits - FREE S&H!!
