My Z06 2.9 Whipple build
05-01-2018, 08:21 PM
#1
My Z06 2.9 Whipple build
Car started out as a F1x build but ran into too many issue from previous shop work.. So I de-SL car and started over.
Build list...
2.9 Whipple with port setup.
Crawford Racing Holley Port Fueler
38% BTR cam
Heads Done
Custom fuel system
all other supporting mods.
FULL custom radiator,condensor and heat exchanger system.
I have Holley running in/out water sensors and blower temp sensors also.
Can runs cool and sound of blower is crazy coming from custom 5" intake system with NO restriction... Its feed with clean air from the front.
Enough of the boring info. Heres some pics
Build list...
2.9 Whipple with port setup.
Crawford Racing Holley Port Fueler
38% BTR cam
Heads Done
Custom fuel system
all other supporting mods.
FULL custom radiator,condensor and heat exchanger system.
I have Holley running in/out water sensors and blower temp sensors also.
Can runs cool and sound of blower is crazy coming from custom 5" intake system with NO restriction... Its feed with clean air from the front.
Enough of the boring info. Heres some pics
Last edited by Drew27; 08-04-2018 at 12:04 AM.
05-01-2018, 08:25 PM
#2
Moar pics
The following 4 users liked this post by Drew27:
05-01-2018, 08:36 PM
#4
Team Owner
VERY sweet! Love the cheek coolers! Who's are they?
The following users liked this post:
mr056 (05-03-2018)
05-01-2018, 08:43 PM
#6
05-01-2018, 08:48 PM
#7
Drifting
Sweet build man, I wish these units were out honestly before I took the procharger plunge.
05-01-2018, 08:51 PM
#8
Melting Slicks
Member Since: Feb 2009
Location: Dallas Georgia
Posts: 2,787
Received 594 Likes
on
408 Posts
2020 Corvette of the Year Finalist (track prepared)
C3 of Year Winner (track prepared) 2019
What all was done to enable to data on the factory screen? Is it being fed from OBD2 or standalone?
The following users liked this post:
The Rock1 (05-02-2018)
05-01-2018, 08:53 PM
#9
Next build will be Turbo... I have a problem that I like the build process
The following users liked this post:
timmyZ06 (06-26-2018)
05-01-2018, 08:54 PM
#10
The following 3 users liked this post by Drew27:
05-01-2018, 09:03 PM
#11
I have intake envy, I hate it when yours is bigger than mine. I want 5 inches so bad, just don’t tell my wife that 
05-01-2018, 09:14 PM
#12
05-01-2018, 09:31 PM
#13
Pro
More pics!
This is the build that I want!
2.9 Whipple and port fuel system!!
With the cam lobe and the CR fueler, can you run 100% E85?
This is the build that I want!
2.9 Whipple and port fuel system!!
With the cam lobe and the CR fueler, can you run 100% E85?
05-01-2018, 09:39 PM
#14
05-01-2018, 10:26 PM
#16
Pro
05-01-2018, 10:39 PM
#18
Race Director
Member Since: Jul 2007
Location: Texas Hill Country
Posts: 10,763
Received 2,379 Likes
on
1,238 Posts
very cool, i love that front intake setup.
05-02-2018, 07:45 AM
#19
