Competition Carbon front bumper and ZR1 cooling compatible!!
#61
Former Vendor
Thread Starter
Member Since: Sep 2016
Location: Westminster California
Posts: 2,557
Received 329 Likes
on
225 Posts
I have all of the part numbers. Will be 21-2200 shipped for all of the five coolers, two brackets, and two pumps. Z06 only use one pump so we may have to adapt it some how. I bought the full package to work with a LT5 2650 swap potentially.
The following users liked this post:
Harbgrogan (09-13-2018)
#62
Former Vendor
Thread Starter
Member Since: Sep 2016
Location: Westminster California
Posts: 2,557
Received 329 Likes
on
225 Posts
Bumper was adjusted a few times to make it more aesthetically pleasing to the eyes.
#63
Will try to keep the cost down with the plastic fiberglass hybrid, easiest and quickest for my workers to put out. Looks like it will be a hit so more people will buy, the better the price I can get them to you.
I have all of the part numbers. Will be 21-2200 shipped for all of the five coolers, two brackets, and two pumps. Z06 only use one pump so we may have to adapt it some how. I bought the full package to work with a LT5 2650 swap potentially.
If you do get into that market, i would suggest your own custom kit. I wished i was on your side of the country, i would show you my designs and help you fab up something great. All a person needs to add are air to oil coolers, and perhaps re-arrange the blower HX in the nose as well. Things dont have to be as complicated as the other big shops are doing if oil to air is addressed in step 1 instead of as the last step, as they are doing.
The following users liked this post:
Deity.Motorsports (09-12-2018)
#64
Former Vendor
Thread Starter
Member Since: Sep 2016
Location: Westminster California
Posts: 2,557
Received 329 Likes
on
225 Posts
I didnt realize you were trying to tackle this as well. You may know this already, but the zr1 system is not compatible with the lt4 z06 bower because the zr1 lt5 blower is a double pass, and the l4t is a single pass, for the fluid to enter and exit. So the zr1 system and its crazy 8 geometry, and 2 pumps, does not work with the z06 blower. Even the whipple 2.9 is only a single inlet and outlet. If i were in your shoes, i would not get into that hornets nest, as now you can be blamed for ruining peoples engines and overheating, instead of remaining in the hero category as the one who provided the nose that let more air in.
If you do get into that market, i would suggest your own custom kit. I wished i was on your side of the country, i would show you my designs and help you fab up something great. All a person needs to add are air to oil coolers, and perhaps re-arrange the blower HX in the nose as well. Things dont have to be as complicated as the other big shops are doing if oil to air is addressed in step 1 instead of as the last step, as they are doing.
If you do get into that market, i would suggest your own custom kit. I wished i was on your side of the country, i would show you my designs and help you fab up something great. All a person needs to add are air to oil coolers, and perhaps re-arrange the blower HX in the nose as well. Things dont have to be as complicated as the other big shops are doing if oil to air is addressed in step 1 instead of as the last step, as they are doing.
Khoa
The following users liked this post:
Mikec7z (09-12-2018)
#65
does the 2650 have 4 ports, 2 in and 2 out for the coolant? I have not been able to study it well yet.
#66
Racer
I wish some some one would make a Lambo bumper like this for the C7 Vette. I know it can be done and look awesome if done right and professional!
#68
Racer
#70
Racer
#71
Former Vendor
Thread Starter
Member Since: Sep 2016
Location: Westminster California
Posts: 2,557
Received 329 Likes
on
225 Posts
Won’t work. Trust me. Slopes of the top of the bumper are much different. C7 is front engine so it is a gradual slope at the top, Huracan is mid so the nose is much shorter and it’s much sharper slope at the top.
I have the Performante bumper mocked up and was only able to use 30% of it. Plus the center opening are too small for C7Z cooling.
I have the Performante bumper mocked up and was only able to use 30% of it. Plus the center opening are too small for C7Z cooling.
#72
Racer
I guess it's a lot easier to just cut and past photos 😉
Well im still very interested in yours. 😎
Well im still very interested in yours. 😎
Won’t work. Trust me. Slopes of the top of the bumper are much different. C7 is front engine so it is a gradual slope at the top, Huracan is mid so the nose is much shorter and it’s much sharper slope at the top.
I have the Performante bumper mocked up and was only able to use 30% of it. Plus the center opening are too small for C7Z cooling.
I have the Performante bumper mocked up and was only able to use 30% of it. Plus the center opening are too small for C7Z cooling.
#78
Sema is close. We look forward to seeing your finished work of art. Good work guys.
The following 2 users liked this post by Competition.Carbon:
foreverfuelie (11-20-2018),
Harbgrogan (11-20-2018)